Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on the Side-Cut Grinding using the CBN Wheels

CBN 숫돌에 의한 측면연삭가공에 관한 연구

  • 이충석 (금오공대 대학원 기계설계공학과) ;
  • 김창수 ((주)씨엔아이테크놀로지) ;
  • 박원규 (경기과학기술대학 자동차과) ;
  • 이종찬 (금오공대 기계설계공학과) ;
  • 최환 (금오공대 기계설계공학과)
  • Published : 2012.06.30
⟨ Previous Next ⟩

Abstract

One of the problems in the grinding process using the machining center(MC) with a small diametric wheels is machining error due to decrease of the quill diameter. In this thesis, side-cut grinding is performed with a vitrified bonded CBN wheel on the machining center to establish the basis of the grinding using MC. The grinding force and machining error are investigated experimentally for the change of the machining condition. It is possible to estimate the machining performance by the ratio of the setting depth of cut and actual depth of cut. In addition, the relation between normal grinding force and machining error is presented by the experimental formula.

Keywords

References

  1. G. Antonini, "Applying Machining Center Technology to Grinding", Modern Machine Shop, Vol. 66, No. 7, p. 70, 1993.
  2. H. Nakagawa, T. Hirogaki, Y. Iwasaki, T. Hayashi, Y. Kita, Y. Kakino, "Study on Oscillation Grinding by Numerical Control with a Machining Center", Journal of the Japan Society of Precision Engineering, Vol. 68, No. 7, pp. 923-927, 2002.
  3. Young-Il Seo, Man-Seung Her, Hwan Choi, Jong-Chan Lee, Seon-Hwan Cheong, "A Study on the Grinding Force Characteristics in the Internal Plunge Grinding", Journal of the Korean Society of Precision Engineering, Vol. 16, No. 12, pp. 54-59. 1999.
  4. Young-Il Seo, Chang-Su Kim, Hwan Choi, Jong-Chan Lee, Seon-Hwan Cheong, "Study on the Accelerating Effect of an Accelerating Unit in Grinding using Machining Center", Journal of the Korean Society of Precision Engineering, Vol. 16, No. 3, pp. 103-108, 1999.
  5. Malkin, S. "Specific Energy and Mechanisms in Abrasive Processes", Proceedings, Third North American Metalworking Research Conference, Carnegie Process, p. 453, 1975.