Computational Design of Electrode Networks for Preferentially Aligned Short Fiber Composite Component Fabrication via Dielectrophoresis

  • Srisawadi, Sasitorn (National Metal and Materials Technology Center) ;
  • Cormier, Denis R. (Department of Industrial and Systems Engineering, Rochester Institute of Technology) ;
  • Harrysson, Ola L.A. (Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State University Raleigh) ;
  • Modak, Sayantan (Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State University Raleigh)
  • 발행 : 2012.04.01

초록

Finite Element Analysis (FEA) is often used to identify local stress/strain concentrations where a component is likely to fail. In order to reduce the degree of strain concentration, component thickness can be increased in those regions, or a stronger material can be used. In short fiber reinforced composite materials, strength and stiffness can be increased through proper fiber alignment. The field-aided microtailoring (FAiMTa) process is one promising method for doing this. FAiMTa uses principles of dielectrophoresis to preferentially align particles or fibers within a matrix. To achieve the preferred fiber orientation, an interdigitated electrode network must be integrated into the mold halves which can be fabricated by additive manufacturing (AM) processes. However, the process of determining the preferred fiber arrangements and electrode locations can be very challenging. This paper presents algorithms to semi-automate the interdigitated electrode design process. The algorithm has been implemented in the Solidworks CAD system and is demonstrated in this paper.

키워드

참고문헌

  1. Pipes, R.B., McCullough, R.L. and Taggart, D.G. (1982), Behavior of discontinuous fiber composites: Fiber orientation, Polymer Composites 3(1), 34-39. https://doi.org/10.1002/pc.750030107
  2. Chung, D.D.L. (1994), Carbon fiber composites. Boston: Butterworth-Heinemann.
  3. De, S.K. and White, J.R. (1996), Short fibre-polymer composites. Cambridge, England: Woodhead Pub.
  4. Matthews, F.L. and Rawlings, R.D. (1999), Composite materials: Engineering and science. Boca Raton; Cambridge, England: CRC Press; Woodhead Publishing.
  5. Papathanasiou, T. (1997), Flow-induced alignment in injection molding of fiber-reinforced polymer composites. Flow-induced alignment in composite materials, 112.
  6. Calvert, P. and Crockett, R. (1997), Chemical solid freeform fabrication: making shapes without molds, Chem. Mater. 9(3), 650-663.
  7. Calvert, P., Lin, T.L. and Martin, H. (1997), Extrusion freeform fabrication of chopped-fibre reinforced composites, High Perform Polymers 9(4), 449. https://doi.org/10.1088/0954-0083/9/4/008
  8. Shofner, M., Rodriguez-Macias, F., Vaidyanathan, R. and Barrera, E. (2003), Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication, Composites Part A: Applied Science and Manufacturing 34(12), 1207-1217. https://doi.org/10.1016/j.compositesa.2003.07.002
  9. Hatta, H. and Yamashita, S. (1988), Fiber orientation control by means of magnetic moment, J. Composite Mater. 22(5), 484. https://doi.org/10.1177/002199838802200507
  10. Yamashita, S., Hatta, H., Sugano, T. and Murayama, K. (1989), Fiber orientation control of short fiber composites: Experiment, J. Composite Mater. 23(1), 32. https://doi.org/10.1177/002199838902300103
  11. Kim, G, Moeller, D. and Shkel, Y. (2004), Orthotropic polymeric composites with microstructure tailored by electric field, J. Composite Mater. 38(21), 1895. https://doi.org/10.1177/0021998304048415
  12. Kim, G.H. and Shkel, Y.M. (2004), Polymeric composites tailored by electric field, J. Mater. Res. 19(4), 1164-1174. https://doi.org/10.1557/JMR.2004.0151
  13. Modak, S. (2008), Freeform fiber alignment in a polymer matrix using conformal electrode field networks, North Carolina State University, unpublished MS Thesis.
  14. Li, B., Clark, P. and Church, K. Robust direct-write dispensing tool and solutions for micro/meso-scale manufacturing and packaging. Proceedings of the ASME International Manufacturing Science and Engineering Conference.