Abstract
The rough design information is only available from BIM(Building Information Model) based schematic design. So, it is difficult to obtain sufficient information for generating BOQ. Like 2D design, there are some problems that the results are depend on what the choice of cost estimator. However, the most research of BIM based cost estimation are focus on quantity takeoff, the consideration of work item for generating BOQ is insufficient. Therefore, this paper present automatic inference process of work items in a BOQ using ontology. The proposed process and ontology is validated through applying tiling construction. If the proposed process is utilized, it is expected the basis of developing generation method for consistent BOQ by resolving intervention of cost estimator's arbitrary decision.
BIM(Building Information Model) 기반으로 기본설계를 수행한 경우에도 개략적인 설계 정보만 제공되므로, 내역작성에 필요한 충분한 정보를 설계도면으로부터 확보하는 것이 어렵다. 하지만 대부분 BIM기반 공사비산정 관련 연구들은 물량산출 자동화 또는 BIM 기반 물량산출결과의 정확도 향상을 위한 방안 제시하는 것이 대부분이며, 건설사업의 공사비산정에서 요구되고 있는 표준품셈 및 일위대가에 대한 고려가 미흡하다. 따라서 본 연구에서는 BIM 활용의 장점을 활용하고 여기에 온톨로지 기술을 접목하여, BIM 기반의 기본설계 정보로부터 내역서 생성에 필요한 작업내역을 자동으로 추출하는 프로세스를 제시한다. 이 프로세스를 적용할 경우, BIM 정보의 활용성이 더욱 향상될 것으로 기대되며, 견적자의 자의적 판단이 개입되던 문제를 해결하여 동일한 BIM이라면 동일한 견적결과를 얻을 수 있는 일관성 있는 내역작성 방법 개발의 기초가 될 것으로 기대된다.