DOI QR코드

DOI QR Code

Nafion 함량이 데칼전사기법을 통해 제작된 고분자 전해질 연료전지의 MEA 성능에 미치는 영향

Effects of Nafion Contents on the Performance of MEAs Prepared by Decal-Transfer Method

  • 김경희 (한국과학기술연구원 연료전지연구센터) ;
  • 조은애 (한국과학기술연구원 연료전지연구센터) ;
  • 한종희 (한국과학기술연구원 연료전지연구센터) ;
  • 김성현 (고려대학교 화공생명공학과) ;
  • 엄광섭 (한국과학기술연구원 연료전지연구센터)
  • Kim, Gyeong-Hee (Fuel Cell Research Center, Korea Institute of Science and Technology) ;
  • Cho, Eun-Ae (Fuel Cell Research Center, Korea Institute of Science and Technology) ;
  • Han, Jong-Hee (Fuel Cell Research Center, Korea Institute of Science and Technology) ;
  • Kim, Sung-Hyun (Dept. of Chemical & Biological Engineering, Korea University) ;
  • Eom, Kwang-Sup (Fuel Cell Research Center, Korea Institute of Science and Technology)
  • 투고 : 2012.04.10
  • 심사 : 2012.04.27
  • 발행 : 2012.04.30

초록

Nafion ionomer located in electrode helps to increase the platinum utilization and proton conductivity. To achieve higher performance in PEMFCs, it is important an optimum Nafion content in the electrode. As the platinum loading and fabricated method depend on the optimum Nafion content. In this study, we have examined the interrelationship between platinum loading and Nafion content fabricated by decal transfer method. For electrodes with 0.25 and 0.4 mg/$cm^2$ Pt loading, best performance was obtained at 25 wt.% Nafion ionomer loading. It is also found that MEA with 0.25 mg/$cm^2$ Pt, the optimum Nafion content appears differently at low and high current density.

키워드

참고문헌

  1. Ryan O'hayer, Wiley Suk-Won Cha, Whitney Colella, Fitz B.Prinz, editors. "Fuel Cell fundamentals", New York: Wiley, 2008.
  2. S. Litster, G. McLean, "PEM fuel cell electrodes", J. Power Sources, Vol. 130, 2004, pp. 61-76. https://doi.org/10.1016/j.jpowsour.2003.12.055
  3. Arvind Parthasarathy, Supramaniam Srinivasan, A. John Appleby, "Electrode kinetics of oxygen reduction at carbon-supported and unsupported platinum microcrystallite/Nafion interfaces", J. Electroanal. Chem., Vol. 339, 1992, pp. 101-121. https://doi.org/10.1016/0022-0728(92)80447-C
  4. M. W. Wilson, S. Gottersfeld, "Thin-film catalyst layers for polymer electrolyte fuel cell electrodes", J. Appl. Electrochem., Vol. 22, 1992, pp. 1-7. https://doi.org/10.1007/BF01093004
  5. Haolin Tang, Shenlong Wang, San Ping Jiang, Mu Pan, "A comparative study of CCM and hot-pressed MEAs for PEM fuel cells", J. Power Sources, Vol. 170, 2007, pp. 140-144. https://doi.org/10.1016/j.jpowsour.2007.03.062
  6. G. Sasikumar, J.W.Ihm, H.Ryu, "Dependence of optimum Nafion content in catalyst layer on platinum loading", J. Power Sources, Vol. 132, 2004, pp. 11-17. https://doi.org/10.1016/j.jpowsour.2003.12.060
  7. G. Sasikumar, J.W. Ihm, H.Ryu, "Optimum Nafion content in PEM fuel cell electrodes", Electrochim. Acta, Vol. 50, 2004, pp. 601-605. https://doi.org/10.1016/j.electacta.2004.01.126
  8. E. Passalacqua, F.Lufrano, G. Squadrito, A.Patti, L.Giorgi. "Nafion content in the catalyst layer of polymer electrolyte fuel cells ; effects on structure and performance", Electrochim. Acta, Vol. 46, 2001, pp. 799-805. https://doi.org/10.1016/S0013-4686(00)00679-4
  9. K.H Kim, K.Y Lee, H.J Kim, E.A Cho. S.Y Lee, T.H Lim, S.P Yoon, I.C Hang, J.H Jang, "The effects of Nafion ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method", Int. J. Hydrogen Energy, Vol. 35, 2010, pp. 2119-2126. https://doi.org/10.1016/j.ijhydene.2009.11.058
  10. D.Y Lee, S.W Hwang, "Effect of loading and distributions of Nafion ionomer in the catalyst layer for PEMFCs", Int. J. Hydrogen Energy, Vol. 33, 2008, pp. 2790-2794. https://doi.org/10.1016/j.ijhydene.2008.03.046
  11. Zhigang Qi, Arthur Kaufman, "Low Pt loading high performance cathodes for PEM fuel cells", J. Power Sources, Vol. 113, 2003, pp. 37-43. https://doi.org/10.1016/S0378-7753(02)00477-9
  12. Takahiro Suzuki, Shohji Tsushima, Shuichiro Hirai, "Effects of Nafion ionomer and carbon particles on structure formation in a proton-exchange membrane fuel cell catalyst layer fabricated by the decal-transfer method", Int. J. Hydrogen Energy, Vol. 36, 2011, pp. 12361-12369. https://doi.org/10.1016/j.ijhydene.2011.06.090
  13. Peter Gode, Frederic Jaouen, Goran Lindbergh, Anders Lundblad, Goran Sundholm, "Influence of the composition on the structure and electrochemical characteristics of the PEFC cathode", Electrochim. Acta, Vol. 48, 2003, pp. 4175-4187. https://doi.org/10.1016/S0013-4686(03)00603-0
  14. S.Y. Jeon, J.S. Lee, G.M. Rios, H.J. Kim, S.Y. Lee, E.A. Cho, T.H. Lim, J.H. Jang, "Effect of ionomer content and relative humidity on polymer electrolyte membrane fuel cell (PEMFC) performance of membrane-electrode assemblies (MEAs) prepared by decal transfer method", Int. J Hydrogen Energy, Vol. 35, 2010, pp. 9678-9686. https://doi.org/10.1016/j.ijhydene.2010.06.044
  15. A. Pozio, M. D. Francesco, A.Cemmi, F. Cardellini, L. Giorgi, "Comparison of high surface Pt/C catalysts by cyclic voltammetry", J Power Sources, Vol. 105, 2002, pp. 13-19. https://doi.org/10.1016/S0378-7753(01)00921-1
  16. X. Yuan, H.J. Wang, J.C. Sun, J.J. Jang. "AC impedance technique in PEM fuel cell diagnosis", Int. J Hydrogen Energy, Vol. 32, 2007, pp. 4365-4380. https://doi.org/10.1016/j.ijhydene.2007.05.036