한국멀티미디어학회논문지 (Journal of Korea Multimedia Society)

  • 제15권1호
  • /
  • Pages.148-165
  • /
  • 2012
  • /
  • 1229-7771(pISSN)
  • /
  • 2384-0102(eISSN)
한국멀티미디어학회 (Korea Multimedia Society)
권호 표지
DOI QR코드

DOI QR Code

가상목업을 활용한 협업 정비 시뮬레이션 시스템

Collaborative Maintenance Simulation System Using Virtual Mockup

  • 투고 : 2011.07.26
  • 심사 : 2011.11.22
  • 발행 : 2012.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

가상목업을 이용한 정비 시뮬레이션을 제품 설계 단계에 적용함으로써 시제품 제작 전 정비성을 검증할 수 있고, 제품 개발 비용을 절감할 것으로 기대되고 있다. 정비 시뮬레이션 결과는 정비 매뉴얼 컨텐츠로 재사용하거나 RAM (Reliability, Availability, Maintainability) 분석 자료로 활용할 수 있다. 가상 환경에서 설계 타당성을 검증하기 위해 정비 시뮬레이션은 가상 제품의 물리특성, 부품의 조립관계, 조작 과정을 실제 환경과 유사하게 제공해야 한다. 시뮬레이션 시스템은 협업 정비 절차를 수행하기 위해 가상 협업 환경으로 확장되어야 한다. 본 논문은 현재 알려진 정비 시뮬레이션을 가상 협업 환경으로 확장하기 위한 3계층 시스템 구조와 물리모의 기반 협업 인터렉션 기술을 제안한다. 제안된 협업 정비 시뮬레이션 시스템은 가상목업 정비 시뮬레이션 시스템으로 구현하였으며, 시뮬레이션 결과를 VADE (Virtual Assembly Design Environment) 사례와 비교하여 물리모의 기반 협업 인터렉션 기술로 다양한 정비 작업을 모의하는 것이 가능함을 확인하였다.

Applying maintenance simulation using virtual mockup in product design phase enables maintainability test before prototyping physical products, and it is expected to reduce product development costs. The simulation results can be reused as contents of service manuals and RAM (Reliability, Availability, Maintainability) analysis data. Maintenance simulation should provide realistic representation of physical property of virtual product, assembly relation between parts and manipulation process to verify feasibility of product design. The simulation system should be extended to collaborative virtual environment to perform collaborative maintenance procedures. In this paper, the three layered system architecture and the physics based collaborative interaction technique are proposed to extend current maintenance simulation into collaborative virtual environment. The proposed system was implemented as ViMMS (Virtual Mockup Maintenance Simulation system), and compared with case study results of VADE (Virtual Assembly Design Environment). As a result, the ViMMS encompassed broader range of maintenance tasks by using physics based collaborative interaction technique.

키워드

참고문헌

  1. A. Seth, J. M. Vance, and H. H. Oliver, "Virtual Reality for Assembly Methods Prototyping : Review," Virtual Reality, Vol.15, No.1, pp. 5-20, 2011. https://doi.org/10.1007/s10055-009-0153-y
  2. S. Jayram, U. Jayaram, Y. J. Kim, C. DeChenne, K. W. Lyons, C. Palmer, and T. Mitsui, "Industry Case Studies in the Use of Immersive Virtual Assembly," Virtual Reality, Vol. 11, No.4, pp. 217-228, 2007. https://doi.org/10.1007/s10055-007-0070-x
  3. S. Garbaya and U. Zaldivar-Colado, "The Affect of Contact Force Sensations on User Performance in Virtual Assembly Tasks," Virtual Reality, Vol.11, No.4, pp. 287-299, 2007. https://doi.org/10.1007/s10055-007-0075-5
  4. J. Dong and G. Arndt, "A Review of Current Research on Disassembly Sequence Generation and Computer Aided Design for Disassembly," Proc. Instn Mech. Engrs, Vol.217, pp. 299-312, 2002.
  5. J. Kang and P. Xirouchakis, "Disassembly Sequencing for Maintenance: A Survey," Proc. Instn Mech. Engrs, Vol.220, pp. 1697-1716, 2006. https://doi.org/10.1243/09544054JEM596
  6. 김천영, 박영근, 김성래, 류태규, "항공기 설계검 토를 위한 가상목업시스템(ViMS) 개발," 한국 항공우주학회 2006 추계학술대회 논문집, pp. 262-265, 2006.
  7. S. Jayram, "VADE: A Virtual Assembly Design Environment," IEEE Computer Graphics and Applications, Vol.19, No.6, pp. 44-50, 1999. https://doi.org/10.1109/38.799739
  8. J. Mo, Q. Zhang, and R. Gadh, "Virtual Disassembly," Int. J . of CAD/CAM, Vol.2, No.10, pp. 29-37, 2002.
  9. A. Seth, H. Su, and J. Vance, "SHARP: A System for Haptic Assembly and Realistic Prototyping," Proc. of the DETC 2006, CIE-99476, 2006.
  10. J. Aleotti and S. Caselli, "Physics-based Virtual Reality for Task Learning and Intelligent Disassembly Planning," Virtual Reality Vol.15, No.1, pp. 41-54, 2011. https://doi.org/10.1007/s10055-009-0145-y
  11. B. Chen and T. Yang, "Research on Immersive Virtual Maintenance and its Key Technologies," Proc. 2008 International Symposium on Information Science and Engineering, pp. 254-257, 2008.
  12. 주현준, 박영근, 김천영, 정나현, 이준규, 양지연, "군수지원 개발을 위한 정비성 시뮬레이션 활용 효과," 한국항공우주학회 2010 추계학술 발표대회 논문집(II), pp. 1240-1243, 2010.
  13. 이준규, 주현준, 정나현, 양지연, 류태규, "정비 업무 검증을 위한 조립 분해 시뮬레이션 구현," 한국항공우주학회 2009 추계학술대회 논문집, pp. 1173-1176, 2009.
  14. 이준규, 김천영, 양지연, 류태규, "항공무기체계 가상목업 시뮬레이션 개발," 한국군사과학기술학회 2010 종합학술대회 논문집, pp. 1970-1973, 2010.
  15. 김용완, 박진아, "가상현실 기술을 이용한 가상 조립 시뮬레이션에 대한 연구," 멀티미디어학회 논문지, 제13권, 제11호, pp. 1715-1727, 2010.
  16. 류근영, 김천영, 정나현, 주현준, 김병수, "DELMIA 를 이용한 유도 무기 조립 시뮬레이션," 한국항공우주학회 2008 추계학술대회 논문집(II), pp. 1220-1223, 2008.
  17. http://www.3ds.com/products/delmia
  18. N. Badler, C. Erignac, and Y. Liu, "Virtual Humans for Validating Maintenance Procedures," Commun. of the ACM, Vol.45, No.7, pp. 57-63, 2002.
  19. J. Ianni, "A Specification for Human Action Representation," SAE Technical Paper Series 1999-01-1893, 1999.
  20. L. Rui, L. Chuan, Z. Yingzhj, and Z. Dong, "The Preliminary Study on the Human- Factor Evaluation System for Maintainability Design," Proc. of 2009 Int. Conf. on Intelligent Human-Machine Systems and Cybernetics, pp. 107-112, 2009.
  21. R. Vujosevic and J. Ianni, "A Taxonomy of Motion Models for Simulation and Analysis of Maintenance Tasks," Air Force Research Laboratory Technical Report (AL/HR-TP- 1996-0045), 1996.
  22. R. L. Gomes, G. J. Hoyos-Rivera, and J. Courtiat, "Collaborative Virtual Environments: Going Beyond Virtual Reality," Proc. of Int. Conf. Multimedia and Expo, Vol.2, pp. 105-108, 2003.
  23. N. Shyamsundar and R. Gadh, "Internetbased Collaborative Product Design with Assembly Features and Virtual Design Spaces," Computer-Aided Design Vol.33, pp. 637-651, 2001. https://doi.org/10.1016/S0010-4485(01)00069-0
  24. Y. Xu, X. Meng, W. Liu, and H. Xiang, "A Collaborative Virtual Environment for Real Time Assembly Design," Proc. of ACM Int. Conf. on Virtual Reality Continuum and its Application, pp. 373-376, 2006.
  25. http://www.ptc.com
  26. Y. Wang, S. Jayaram, U. Jayaram, and I. Shaikh, "Methods and Algorithms for Constraint based Virtual Assembly," Virtual Reality, Vol.6, No.4, pp. 229-243, 2003. https://doi.org/10.1007/s10055-003-0106-9
  27. C. Mascle and B. A. Balasoiu, "Algorithmic Selection of a Disassembly Sequence of a Component by a Wave Propagation Method," Robotics and Computer-Integrated Manufacturing, Vol.19, No.5, pp. 439-448, 2003. https://doi.org/10.1016/S0736-5845(03)00032-2
  28. http://www.plm.automation.siemes.com/en_us/products/nx
  29. R. Gupta, D. Whitney, and D. Zeltzer, "Prototyping and Design for Assembly Analysis Using Multimodal Virtual Environments," Comput. Aided Des., Vol.29, No.8, pp. 585- 597, 1997. https://doi.org/10.1016/S0010-4485(96)00093-0
  30. W. A. McNeely, K. D. Puterbaugh, and J. J. Troy, "Six Degree of Freedom Haptic Rendering Using Voxel Sampling," SIGGRAPH 99 Conferece Proceedings, pp. 401-408, 1999.
  31. http://www.plm.automation.siemens.com
  32. A. S. Coutee, S. D. McDermottm, and B. Bras, "A Haptic Assembly and Disassembly Simulation Environment and Associated Computational Load Optimization Techniques," ASME Trans. J . Comput. Inf. Sci. Eng., Vol.1, No.2, pp. 113-122, 2001. https://doi.org/10.1115/1.1389085
  33. T. Lim, J. M. Richie, J. R. Corney, R. G. Dewar, K. Schmidt, and K. Bergsteiner, "Assessment of a Haptic Virtual Assembly System that Uses Physics-based Interactions," Proc. of the 2007 IEEE Int'l. Symposium on Assembly and Manufacturing, pp. 147-153, 2007.
  34. C. W. Borst and A. P. Indugula, "Realistic Virtual Grasping," Proc. of the 2005 IEEE Virtual Reality, pp. 91-93, 2005.
  35. http://www.motionanalysis.com
  36. http://www.intersense.com
  37. http://www.3dconnexion.com
  38. http://www.sensics.com
  39. http://www.nvidia.com/object/physx_new.html
  40. http://www.virtools.com

피인용 문헌

  1. A Study on the Automatic Assembly/Disassembly Procedure for Generating Maintenance Guideline vol.18, pp.5, 2015, https://doi.org/10.9766/KIMST.2015.18.5.594
  2. A Case Study on Design Verification for Supportability of Weapon System Based on Virtual Reality vol.19, pp.1, 2016, https://doi.org/10.9766/KIMST.2016.19.1.076