DOI QR코드

DOI QR Code

Effect of compressible membrane's nonlinear stress-strain behavior on spiral case structure

  • Zhang, Qi-Ling (Changjiang River Scientific Research Institute) ;
  • Wu, He-Gao (State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University)
  • 투고 : 2011.10.14
  • 심사 : 2012.02.28
  • 발행 : 2012.04.10

초록

With an active structural involvement in spiral case structure (SCS) that is always the design and research focus of hydroelectric power plant (HPP), the compressible membrane sandwiched between steel spiral case and surrounding reinforced concrete was often assumed to be linear elastic material in conventional design analysis of SCS. Unfortunately considerable previous studies have proved that the foam material serving as membrane exhibits essentially nonlinear mechanical behavior. In order to clarify the effect of membrane (foam) material's nonlinear stress-strain behavior on SCS, this work performed a case study on SCS with a compressible membrane using the ABAQUS code after a sound calibration of the employed constitutive model describing foam material. In view of the successful capture of fitted stress-strain curve of test by the FEM program, we recommend an application and dissemination of the simulation technique employed in this work for membrane material description to structural designers of SCS. Even more important, the case study argues that taking into account the nonlinear stress-strain response of membrane material in loading process is definitely essential. However, we hold it unnecessary to consider the membrane material's hysteresis and additionally, employment of nonlinear elastic model for membrane material description is adequate to the structural design of SCS. Understanding and accepting these concepts will help to analyze and predict the structural performance of SCS more accurately in design effort.

키워드

참고문헌

  1. Aronson, A.Ya., Bazhenov, V.A., Gotsulyak, E.A., Gulyaev, V.I. and Ogloblya, A.I. (1985), "Nonlinear deformation of shells of the volute chambers of hydraulic turbines in an elastic medium", Strength Mater., 17(4), 555-560. https://doi.org/10.1007/BF01533961
  2. Cui, J.H. and Su, H.D. (2007), "3-D FEM emulation computation on surrounding concrete of steel spiral case keeping internal pressure during construction", Proceedings of International Symposium on Computational Mechanics, Beijing, China, July.
  3. Fischer, F., Lim, G.T., Handge, U.A. and Altstdt, V. (2009), "Numerical simulation of mechanical properties of cellular materials using computed tomography analysis", J. Cell. Plast., 45(5), 441-460. https://doi.org/10.1177/0021955X09339340
  4. Gan, Q.M. (2010), "Characteristic and influence factors analysis of compression modulus of polyurethane cork cushion material", Water Power, 36(5), 82-84. (in Chinese)
  5. Gilchrist, A. and Mills, N.J. (2001), "Impact deformation of rigid polymeric foams: Experiments and FEA modelling", Int. J. Impact Eng., 25(8), 767-786. https://doi.org/10.1016/S0734-743X(01)00009-4
  6. Hawkins, M.C., O'Toole, B. and Jackovich, D. (2005), "Cell morphology and mechanical properties of rigid polyurethane foam", J. Cell. Plast., 41(3), 267-285. https://doi.org/10.1177/0021955X05053525
  7. Kalkani, E.C. (1995), "Expected displacements and stresses in the encasing concrete of a Francis turbine scroll case", Comput. Struct., 55(4), 735-739. https://doi.org/10.1016/0045-7949(94)00496-P
  8. Krishnaswamy, S. and Beatty, M.F. (2000), "The Mullins effect in compressible solids", Int. J. Eng. Sci., 38(13), 1397-1414. https://doi.org/10.1016/S0020-7225(99)00125-1
  9. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  10. Lubliner, J., Oliver, J., Oller, S. and Oate, E. (1989), "A plastic-damage model for concrete", Int. J. Solids Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  11. Ma, Z.Y. and Zhang, C.H. (2010), "Static and dynamic damage analysis of mass concrete in hydropower house of Three Gorges Project", Trans. Tianjin Univ., 16(6), 433-440. https://doi.org/10.1007/s12209-010-1442-y
  12. Mullins, L. (1969), "Softening of rubber by deformation", Rubber Chem. Technol., 42(1), 339-362. https://doi.org/10.5254/1.3539210
  13. Ogden, R.W. and Roxburgh, D.G. (1999), "A pseudo-elastic model for the Mullins effect in filled rubber", Proc. R. Soc. Lond. A, 455(1988), 2861-2877.
  14. Rizov, V. (2009), "Indentation of foam-based polymer composite sandwich beams and panels under static loading", J. Mater. Eng. Perform., 18(4), 351-360. https://doi.org/10.1007/s11665-008-9313-6
  15. Shen, Y., Golnaraghi, F. and Plumtree, A. (2001), "Modelling compressive cyclic stress-strain behaviour of structural foam", Int. J. Fatigue, 23(6), 491-497. https://doi.org/10.1016/S0142-1123(01)00014-7
  16. Tian, Z.Q., Zhang, Y.L., Ma, Z.Y. and Chen, J. (2008), "Effect of concrete cracks on dynamic characteristics of powerhouse for giant-scale hydrostation", Trans. Tianjin Univ., 14(4), 307-312. https://doi.org/10.1007/s12209-008-0052-4
  17. U.S. Army Corps of Engineers (1995), EM 1110-2-3001 Planning and Design of Hydroelectric Power Plant Structures, Department of the Army, Washington, DC.
  18. Wu, H.G., Shen, Y. and Jiang, K.C. (2007), "Structural research on embedment of a bare deflated spiral case", Wuhan Univ. J. Natural Sci., 12(2), 311-316. https://doi.org/10.1007/s11859-006-0032-2
  19. Yu, Y., Zhang, Q.L. and Wu, H.G. (2009), "Reinforcement calculation for spiral case embedded with cushion layer of hydropower station", J. Tianjin Univ. Sci. Tech., 42(8), 673-677. (in Chinese)
  20. Zhang, C.H. and Zhang, Y.L. (2009), "Nonlinear dynamic analysis of the Three Gorge Project powerhouse excited by pressure fluctuation", J. Zhejiang Univ. Sci. A, 10(9), 1231-1240. https://doi.org/10.1631/jzus.A0820478
  21. Zhang, Q.L. and Wu, H.G. (2009), "Modal analysis of hydropower house by using finite element method", Proceedings of 2009 Asia-Pacific Power and Energy Engineering Conference, Wuhan, China, March.
  22. Zhang, Q.L., Wu, H.G. and Yang, H.Q. (2009), "Effect of modeling range on structural analysis for powerhouse of hydroelectric power plant by FEM", Trans. Tianjin Univ., 15(5), 388-392. https://doi.org/10.1007/s12209-009-0068-4

피인용 문헌

  1. Using softened contact relationship describing compressible membrane in FEA of spiral case structure vol.13, pp.4, 2013, https://doi.org/10.1016/j.acme.2013.04.009
  2. Embedment of steel spiral cases in concrete: China's experience vol.72, 2017, https://doi.org/10.1016/j.rser.2016.10.048
  3. Bearing mechanism of composite structure with reinforced concrete and steel liner: An application in penstock vol.141, 2017, https://doi.org/10.1016/j.engstruct.2017.03.021
  4. Numerical modeling of preloaded filling spiral case structure vol.15, pp.8, 2018, https://doi.org/10.1590/1679-78255048
  5. Compression-Resilience Responses of Commonly Used Membrane Materials in Spiral Case Structures of Hydroelectric Power Plants: Experimental Investigation vol.30, pp.6, 2018, https://doi.org/10.1061/(ASCE)MT.1943-5533.0002284