DOI QR코드

DOI QR Code

Which CDM methodology is the best option? A case study of CDM business on S-Water treatment plant

  • Kyung, Daeseung (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Lee, Woojin (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2012.06.27
  • 심사 : 2012.07.24
  • 발행 : 2012.06.25

초록

Clean development mechanism (CDM) validity study was conducted to suggest better and more adaptable CDM scenario on water treatment plant (WTP). Potential four scenarios for CDM project; improvement of intake pumping efficiency, hydro power plant construction, solar panel construction and system optimization of mechanical mixing process were evaluated on S-WTP in Korea. Net present value (NPV) of each scenario was estimated based on sensitivity analysis with the variable factors to investigate the CDM validity percentile. Hydro power plant construction was the best option for CDM business with 97.76% validity and $1,127,069 mean profit by 9,813 $tonsCO_2e$/yr reduction. CDM validity on improvement of intake pumping efficiency was 90.2% with $124,305 mean profit by huge amount of $CO_2$ mitigation (10,347 $tonsCO_2e$/yr). System optimization of mechanical mixing process reduced 15% of energy consumption (3,184 $tonsCO_2e$/yr) and its CDM validity and mean profit was 77.25% and $23,942, respectively. Solar panel construction could make the effect of 14,094 $tonsCO_2$ mitigation annually and its CDM validity and mean profit was 64.68% and $228,487, respectively.

키워드

과제정보

연구 과제 주관 기관 : Korean Ministry of Environment

참고문헌

  1. Chester, M. and Martin, E. (2009), "Cellulosic ethanol from municipal solid waste: A case study of the economic, energy, and greenhouse gas impacts in california", Environ. Sci. Technol., 43(14), 5183-5189. https://doi.org/10.1021/es802788z
  2. dos Santos, M.A., Rosa, L.P., Sikar, B., Sikar, E. and dos Santos, E.O. (2006), "Gross greenhouse gas fluxes from hydro-power reservoir compare to thermo-power plants", Energ. policy, 34(4), 481-488. https://doi.org/10.1016/j.enpol.2004.06.015
  3. KEEI (2005), Annual report, Korea Energy Economics Institute, Ewang, 2005.
  4. Kyung, D. and Lee, W. (2011), "Estimation of $CO_2$ emission from water treatment plant by carbon calculator", Adv. Asian. Environ. Eng., 9, 29-36.
  5. Lin, T.T. (2009), "Applying the maximum NPV rule with discounted/growth factors to a flexible production scale model", Eur. J. Oper. Res., 196(2), 628-634. https://doi.org/10.1016/j.ejor.2008.04.004
  6. Mhaisalkar, V.A., Paramasivam, R. and Bhole, A.G. (1991), "Optimizing physical parameters of rapid mix design for coagulation-flocculation of turbid waters", Water Res., 25(1), 43-52. https://doi.org/10.1016/0043-1354(91)90097-A
  7. Moreno, M.A., Carrion, P.A., Planells, P., Ortega, J.F. and Tarjuelo, J.M. (2007), "Measurement and improvement of the energy efficiency at pumping stations", Bio-system. eng., 98(4), 479-486.
  8. Olabisi, L.S., Reich, P.B., Johnson, K.A., Kapuscinski, A.R., Suh, S. and Wilson, E.J. (2009), "Reducing greenhouse gas emissions for climate stabilization: framing regional options", Environ. Sci. Technol., 43(6), 1696-1703. https://doi.org/10.1021/es801171a
  9. Paish, O. (2002), "Small hydro power: technology and current status", Renew. Sust. Energ. Rev., 6(6), 537-556. https://doi.org/10.1016/S1364-0321(02)00006-0
  10. Ramos, J.S. and Ramos, H.M. (2009), "Sustainable application of renewable sources in water pumping systems: optimized energy system configuration", Energ. policy, 37(2), 633-643. https://doi.org/10.1016/j.enpol.2008.10.006
  11. Reiling, S.J., Roberson, J.A. and Cromwell, J.E. (2009), "Drinking water regulation: Estimated cumulative energy use and costs", J. Am. Water Works Ass., 101(3), 42-53.
  12. Rossini, M., Garrido, J.G. and Galluzzo, M. (1999), "Optimization of the coagulation-flocculation treatment: influence of rapid mix parameters", Water Res., 33(8), 1817-1826. https://doi.org/10.1016/S0043-1354(98)00367-4
  13. Schneider, M., Holzer, A. and Hoffmann, V.H. (2008), "Understanding the CDM's contribution to technology transfer", Energ. policy, 36(8), 2930-2938. https://doi.org/10.1016/j.enpol.2008.04.009
  14. Steven, A. and Joshep, S. (2009), "Photo-voltaic solar panels simulation including dynamical thermal effects", Sol. Energy, 29(3), 245-256.
  15. Thorburn, K. and Leijon, M. (2005), "Case study of upgrading potential for a small hydro power station", Renew. Energ., 30(7), 1091-1099. https://doi.org/10.1016/j.renene.2004.08.006
  16. United Nations Framework Convention on Climate Change, Paragraph 5, Article 12, Kyoto protocol, 2006.
  17. van der Laan, E. (2003), "An NPV and AC analysis of a stochastic inventory system with joint manufacturing and remanufacturing", Int. J. Prod. Econ., 81-82, 317-331. https://doi.org/10.1016/S0925-5273(02)00297-9
  18. Wang, J.P., Chen, Y.Z., Ge, X.W. and Yu, X.Q. (2007), "Optimization of coagulation-flocculation process for a paper-recycling wastewater treatment using response surface model", Colloid. surface., 302(1-3), 204-210. https://doi.org/10.1016/j.colsurfa.2007.02.023
  19. Weiss, P., Lefevre, T. and Most, D. (2008), "Modeling the impacts of CDM incentives for the Thai electricity sector", Energ. policy, 36(3), 1134-1147. https://doi.org/10.1016/j.enpol.2007.11.027
  20. Zakharchenko, R. and Licea, L. (2004), "Photo-voltaic solar panel for a hybrid PV/thermal system", Sol. Energ. Mat. Sol. C., 82(1-2), 253-261. https://doi.org/10.1016/j.solmat.2004.01.022