DOI QR코드

DOI QR Code

Determination of the Ampacity of Buried Cable in Non-Homogenous Environmental Condition by 3D Computation

  • Vahidi, Behrooz (Dept. of Electrical Engineering, Amirkabir University of Technology) ;
  • Mahmoudi, Amin (Dept. of Electrical Engineering, Amirkabir University of Technology)
  • Received : 2010.06.14
  • Accepted : 2011.12.08
  • Published : 2012.05.01

Abstract

Finite Volume Method (FVM) is chosen to calculate the heat transfer field and the heat generation with in the cable and heat dissipation in the surrounding soil of a three phase 145kV underground cable brunch that make it possible to analyze the ampacity of the cable. FLUENT as the proper software in this field is used to generate and solve the problem. Non-homogenous environment is considered for cable ampacity calculation and results are compare with homogenous environment condition.

Keywords

References

  1. L. DeLeon, "Calculation of underground cable ampacity", CYME International T&D, pp 1-6, 2005.
  2. G. L. Anders, Rating of Electric Power Cables- Ampacity Calculations for Transmission, Distribution and Industrial application, McGraw-Hill, 1998.
  3. IEEE Standard, Power Cable Ampacity Tables, IEEE Std. 835-1994.
  4. IEC Standard 60287, Calculation of the Continues Current Rating of Cables (100% load factor), 1st edition 1969, 2nd edition 1982, 3rd edition 1994-1995.
  5. IEC Standard 60287, part 2-1, Calculation of Thermal Resistances, 1994.
  6. J. H. Neher and M. H. McGrath, "The calculation of the temperature rise and load capability of cable systems", AIEE Trans. Power App. Syst., vol. 76, pp 752-772, 1957. https://doi.org/10.1109/AIEEPAS.1957.4499653
  7. G. L. Anders and H. S. Radhakrishna, "Power cable thermal analysis with considerationof heat and moisture transfer in the soil", IEEE Trans. On Power Delivery, vol. 3, pp 1280-1288, 1988. https://doi.org/10.1109/61.193921
  8. J. Nahman and M. Tanaskovic, "Determination of the current carrying capacity of cables using the finite element method", Electric Power Systems Reasearch, Elsevier, vol. 61, pp 109-117, 2002. https://doi.org/10.1016/S0378-7796(02)00003-2
  9. G. Gela, and J. J. Dai, "Calculation of thermal fields of underground cables using the boundary element method", IEEE Transaction on Power Delivery, vol. 3, pp 1341-1347, 1988. https://doi.org/10.1109/61.193929
  10. G. Koopmans, G. M. L. M. Van de Wiel, L. J. M. Van Loon and C. L. Palland, "Soil physical route survey and cable thermal design procedure', IEE Proceedings, Pt. C, vol. 136, pp 341-346, 1989.
  11. A. A. Al-Ohaly, "Performance of underground power cables under extreme soil and environmental conditions", Kuwait J. Sci. Eng., vol. 30, pp297-312, 2003.
  12. P. Vaucheret, R. A. Hartlein, and W. Z. Black, "Ampacity derating factors for cables buried in short segments of conduit", IEEE Transaction on Power Delivery, vol. 20, pp 560-565, 2005. https://doi.org/10.1109/TPWRD.2005.844358
  13. FLUENT 6.3 (Getting Started Guide), Finite Volume Simulation Software, ANSYS Inc., Canonsburg, PA, 2006.
  14. G. L. Anders, Rating of Electric Power Cables in Unfavorable Thermal Environments, 1st Edition, IEEE Press, 2005.