DOI QR코드

DOI QR Code

인젝터 특성에 따른 2중 연료의 RCCI 연소에 관한 실험적 연구

An Experimental Study on RCCI(Reactivity Controlled Compression Ignition) Combustion of Dual-fuel due to Injector Characteristics

  • 성기안 (강원도립대학 자동차과)
  • Sung, Ki-An (Department of Automotive Engineering, Gangwon Provincial College)
  • 투고 : 2011.02.28
  • 심사 : 2011.08.08
  • 발행 : 2012.03.01

초록

This study describes the characteristics of combustion and exhaust emission in the special engine applying a fuel reactivity controlled compression ignition (RCCI) concept with two different energizing type (solenoid and piezoelectric) injectors for diesel injection. A diesel-gasoline mixed dual-fuel reactivity controlled compression ignition concept is demonstrated as a promising method to achieve high thermal efficiency and low emission in internal combustion engines for transportation vehicles. For investigating the combustion characteristics of RCCI, engine experiments were performed in a light-duty diesel engine over a range of injection timing and mixing rate of gasoline in mass. It was investigated that by increasing the nozzle hole diameter, increasing the combustion pressure and the net indicated mean effective pressure. $NO_x$ and soot can be reduced by advancing start of injection in 84 mixing rate of gasoline in mass. The resulting operation showed that light duty engine could achieve 48 percent net indicated efficiency and 191[g/kW-hr] net indicated specific fuel consumption with lower levels of nitrogen oxides and soot.

키워드

참고문헌

  1. R. G. Hyun and C. S. Lee, "The Effect of Multiple Injections on the Stability of Combustion and Emissions Characteristic in a Passenger Car Diesel Engine," Transactions of KSAE, Vol.15, No.4, pp.1-9, 2007.
  2. K. A. Sung and R. Reitz, "Experimental Study of Emission Reduction for Near-stoichiometric Diesel Combustion Using a 3-Way Catalyst," Int. J. Engine Research, Vol.10, No.5, pp.349-357, 2009. https://doi.org/10.1243/14680874JER04109
  3. R. Hanson, S. Kokjohn, D. Splitter and R. Reitz, "An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-duty Engine," SAE 2010-01-0864, 2010.
  4. D. Wickman, K. Senecal and R. Reitz, "Diesel Engine Combustion Chamber Geometry Optimization Using Genetic Algorithms and Mutidimensional Spray and Combustion Modeling," SAE 2001-01-0547, 2001.
  5. J. A. Eng, "Characterization of Pressure Waves in HCCI Combustion," SAE 2002-01-2859, 2002.
  6. J. Gatowski, E. Chun, K. Nelson and B. Heywood, "Heat Release Analysis of Engine Pressure Data," SAE 841359, 1984.