DOI QR코드

DOI QR Code

Lagrangian-Eulerian 기법을 이용한 고압 디젤 분무 시뮬레이션의 수치해석격자 의존성 저감에 관한 연구

Reduction of a Numerical Grid Dependency in High-pressure Diesel Injection Simulation Using the Lagrangian-Eulerian CFD Method

  • 김사엽 (조지아공과대학교 항공과) ;
  • 오윤중 (한양대학교 대학원 기계공학과) ;
  • 박성욱 (한양대학교 기계공학부) ;
  • 이창식 (한양대학교 기계공학부)
  • Kim, Sa-Yop (School of Aerospace Engineering, Georgia Institute of Technology) ;
  • Oh, Yun-Jung (Department of Mechanical Engineering, Graduate School, Hanyang University) ;
  • Park, Sung-Wook (Department of Mechanical Engineering, Hanyang University) ;
  • Lee, Chang-Sik (Department of Mechanical Engineering, Hanyang University)
  • 투고 : 2010.09.06
  • 심사 : 2011.07.30
  • 발행 : 2012.01.01

초록

In the standard CFD code, Lagrangian-Eulerian method is very popular to simulate the liquid spray penetrating into gaseous phase. Though this method can give a simple solution and low computational cost, it have been reported that the Lagrangian spray models have numerical grid dependency, resulting in serious numerical errors. Many researches have shown the grid dependency arise from two sources. The first is due to unaccurate prediction of the droplet-gas relative velocity, and the second is that the probability of binary droplet collision is dependent on the grid resolution. In order to solve the grid dependency problem, the improved spray models are implemented in the KIVA-3V code in this study. For reducing the errors in predicting the relative velocity, the momentum gain from the gaseous phase to liquid particles were resolved according to the gas-jet theory. In addition, the advanced algorithm of the droplet collision modeling which surmounts the grid dependency problem was applied. Then, in order to validate the improved spray model, the computation is compared to the experimental results. By simultaneously regarding the momentum coupling and the droplet collision modeling, successful reduction of the numerical grid dependency could be accomplished in the simulation of the high-pressure injection diesel spray.

키워드

참고문헌

  1. S. Kim, Y. T. Seo and C. S. Lee, "Prediction of Non-evaporating Diesel Spray by Hybrid Breakup Models," Spring Conference Proceedings, KSAE, Vol.1, pp.483-488, 2007.
  2. D. P. Schimidt, and P. K. Senecal, "Improving the Numerical Accuracy of Spray Simulations," SAE 2002-01-1113, 2002.
  3. A. A. Amsden, "KIVA-3V: A Block Structured KIVA Program for Engines with Vertical or Canted Valves," Los Alamos National Laboratory Technical Report, No. LA-13313-MS, 1997.
  4. P. Beard, J.-M. Duclos, C. Habchi, G. Bruneaux, K. Mokaddem and T. Baritaud, "Extension of Lagrangian-Eulerian Spray Modeling: Application to High Pressure Evaporating Diesel Sprays," SAE 2006-01-3335, 2006.
  5. N. Abani, S. Kokjohn, S. W. Park, M. Bergin, A. Munnannur, W. Ning, Y. Sun and R. D. Reitz, "An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations," SAE 2008-01-0970, 2008.
  6. P. J. O'Rourke, Collective Drop Effects on Vaporizing Liquid Sprays, Ph.D. Dissertation, Princeton University, New Jersey, USA, 1981.
  7. N. Nordin, Complex Chemistry Modeling of Diesel Spray Combustion, Ph.D. Dissertation, Chalmers University of Technology, Gothenburg, Sweden, 2001.
  8. A. Munnannur and R. D. Reitz, "A New Predictive Model for Fragmenting and Nonfragmenting Binary Droplet Collisions," Int. J. Multiphase Flow, Vol.33, pp.873-896, 2007. https://doi.org/10.1016/j.ijmultiphaseflow.2007.03.003
  9. J. D. Naber and D. L. Siebers, "Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays," SAE 960034, 1996.
  10. S. Kim, D. J. Lee and C. S. Lee, "Modeling of Droplet Collisions for Application to Interimpingement Sprays," Int. J. Multiphase Flow, Vol.35, pp.533-649, 2009. https://doi.org/10.1016/j.ijmultiphaseflow.2009.02.010

피인용 문헌

  1. Study of behavior characteristics of diesel fuel spray according to breakup models vol.10, pp.1, 2015, https://doi.org/10.1299/jtst.2015jtst0005