Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Stable Indication for a Sloshing of Fuel-quantity according to Driving State of Vehicle

차량 주행 상태에 따른 연료량 유동의 안정 지침에 대한 연구

  • Hur, Jin (Graduate School of Intelligent Vehicle & Transportation, Keimyung University) ;
  • Park, Jong-Myeong (Graduate School of Intelligent Vehicle & Transportation, Keimyung University) ;
  • Lee, Seon-Bong (Department of Mechanical & Automotive Engineering, Keimyung University)
  • 허진 (계명대학교 지능형자동차대학원) ;
  • 박종명 (계명대학교 지능형자동차대학원) ;
  • 이선봉 (계명대학교 기계자동차공학부)
  • Received : 2011.02.28
  • Accepted : 2011.10.14
  • Published : 2012.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the application of robust fuel gauge algorithm in the external environment to general fuel gauge system is proposed. The proposed fuel gauge system is composed of two modules which are Moving Average Filter (MAF) and Inclination Filter (IF). They are used to show correctly the amount of fuel in the external environment which are curve road, slope or acceleration/deceleration driving. In parallel, verification and validation processes using Software In the Loop Simulation (SILS) in personal computer and Hardware In the Loop Simulation (HILS) similar to actual vehicle environments are established. Through this research, it turned out to be possible to operation of gauge become correct of external environment.

Keywords

References

  1. T. H. Son, "Electronic Fuel Sender Apparatus for the Vehicles Using CPW Transmission Line," Bulletin of the Korean Institute of Electromagnetic Engineering & Science., Vols.1, 7-4, 2006.
  2. S. B. Lee and B. Y. Lee, "A Study of Fuel System Matching Method Using Characteristic Chart in Vehicle," Transactions of the KSME (A), Vol.32, No.2, pp.194-201, 2008.
  3. D. H. Kim, S. B. Lee and B. M. Kim, "Process Design of a Permalloy Shielding Can for Shape Fixability," Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol.219, pp.723-734, 2005. https://doi.org/10.1243/095440505X32698
  4. W. B. Ribben, Understanding Automotive Electronics, SAE, Burlington, pp.327-337, 2006.
  5. S. H. Kim, J. S. Kim, Y. J. Kim and Y. S. Kim, "A Study of Voltage Drop Compensation Algorithm Using Moving Average," Proceeding of the KIEE Annual Summer Conference, pp.1202-1295, 2004.
  6. D. Y. Kwak, LabVIEW, OHM, Seoul, 2006.
  7. R. Bitter, T. Mohiuddin and M. Nawrocki, LabVIEW Advanced Programming Techniques, CRC Press, Boca Raton, 2005.
  8. K. Y. Lee, S. J. Hong, S. H. Oh and W. T. Lee, "A Study of Model Based Automotive Electronic System Development Process," Fall Conference Proceedings, KSAE, KSAE06- F0231, pp.1480-1485, 2006.
  9. J. W. Son, D. H. Kum, S. B. Lee and S. Lee, "Model-based Design and Validation Method for Body Electronic Systems," Journal of the Korean Society for Precision Engineering, Vol.23, No.9, pp.39-46, 2006.