References
- Park, T. J., Kim, M. S., Jang, J. D., Joo, I. S., 2007, Vibration Analysis of Damper System in Torque Converter, Proceedings of KSNVE Spring Conference, KSNVE07S-08-26.
- Park, J. Y., Sim H. S., 2011, Drive-train Jerk Reduction Control for Parallel Hybrid Electric Vehicles, Transactions of KSAE, Vol. 19, No. 1, pp. 17-24.
- Kim, G.-W. and Jang, J. D., 2002, Analysis of Torsional Vibration of Torque Converter Lock-up Clutch with Damper, KSAE Spring Conference, Vol. II, pp. 819-824.
- Lee, D. H., Chung, T. Y., Kim, Y. C. and Kim, H. S., 2011, Design and Performance Evaluation of Spring-viscous Damper for Torsional Vibration, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 21, No. 12, pp. 1192-1198. https://doi.org/10.5050/KSNVE.2011.21.12.1192
- Steinel, K. and Tebbe, G., 2004, New Torsional Damper Concepts to Reduce Idle Rattle in Truck Transmission, SAE World Congress, No. 2004-01-2722.
- Shim, Y., Kauh, S. K. and Ha, K. P., 2011, Evaluation of Idle Stability Through In-situ Torque Measurement in Automatic Transmission Vehicles, International Journal of Automotive Technology, Vol. 12, No. 3, pp. 315-320. https://doi.org/10.1007/s12239-011-0037-5
- Kim, G.-W., Kucharski, J., Pietron, G., Yanakiev, D., Fujii, Y. and Wang, K. W., 2011, Effect of Road Excitation on Driveline Output Torque Measurement, SAE 2011 Noise and Vibration Conference and Exhibition, Paper No. 2011-01-1538.
- Kim, G.-W., 2012, System Identification of In-situ Vehicle Output Torque Measurement System, Transactions of KSAE, Vol. 20, No. 2, pp. 85-89. https://doi.org/10.7467/KSAE.2012.20.2.085
- SAE, 1997, Manual Transmission Clutch Systems; Chapter 8 Torsional Vibration and Tuning Capacity.
- MATLAB/Signal Processing Toolboxa V7.6 User's guide, The Mathworks, 2011.
Cited by
- Reduction of Booming Noise Using Damper Clutch Disk on the Drive Shaft of Commercial Small Truck vol.25, pp.6, 2015, https://doi.org/10.5050/KSNVE.2015.25.6.377