한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제29권2호
  • /
  • Pages.161-169
  • /
  • 2012
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

피코초 레이저를 이용한 초소수성 표면 제작에 관한 연구

A Study on Surface Fabrication of Super Hydrophobic using Pico Second Laser

  • 조일환 (한국기계연구원 광응용기계연구실) ;
  • 이제훈 (한국기계연구원 광응용기계연구실) ;
  • 노지환 (한국기계연구원 광응용기계연구실) ;
  • 이승원 (충남대학교 응용소재공학과)
  • Cho, Il-Hwan (Department of Laser Electron Beam Engineering, KIMM) ;
  • Lee, Jae-Hoon (Department of Laser Electron Beam Engineering, KIMM) ;
  • Noh, Ji-Whan (Department of Laser Electron Beam Engineering, KIMM) ;
  • Lee, Seoung-Won (Department of Nanomaterials Engineering, Chungnam Univ.)
  • 투고 : 2011.09.28
  • 심사 : 2011.11.01
  • 발행 : 2012.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, a study for the functional surface production of super hydrophobic of natural and biomimetic artificial has attracted much attention. To make process methods of super hydrophobic surface has a variety of ways such as lithography, etching, and laser ablation. However, we were used ultra-shot pulse laser ablation process which has the virtue of more environmental friendliness and simple process. In this paper, we were fabricated a multiplicity of super hydrophobic patterns on mold surface(NAK80) using by optimizing the laser processing conditions and it was transferred on PDMS. Also, we measured contact angle super hydrophobic patterns on PDMS. The result showed there is no patterns on PDMS were measured 94 degrees, by contrast, optimized super hydrophobic patterns on PDMS was 157 degrees. Therefore we fabricated super hydrophobic surface on mold. Based on these experimental results, it is possible to mass production using ultra shot pulse laser ablation of super hydrophobic pattern and to be applied for a variety of industries.

키워드

참고문헌

  1. Barthlott, W. and Neinhuis, C., "Purity of the Sacred Lotus, or Escape from Contamination in Biological Surface," Planta, Vol. 202, No. 1, pp. 1-8, 1997. https://doi.org/10.1007/s004250050096
  2. Neinhuis, C. and Barthlott. W., "Characterization and Distribution of Water-repellent, Self-cleaning Plant Surfaces," Annals of Botany, Vol. 79, No. 6, pp. 667-677, 1997. https://doi.org/10.1006/anbo.1997.0400
  3. Bhushan, B. and Jung, Y. C., "Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction," Progress in Materials Science, Vol. 56, No. 1, pp. 1-108, 2011. https://doi.org/10.1016/j.pmatsci.2010.04.003
  4. Jung, P. G., Jung, I. D., Lee, S. M., and Ko, J. S., "Fabrication of self-encapsulated nickel microchannels and nickel nanowalls by reactive ion etching," Journal of Materials Processing Technology, Vol. 208, No. 1-3, pp. 111-116, 2008. https://doi.org/10.1016/j.jmatprotec.2007.12.132
  5. Lee, S. M., Jung, I. D. and Ko, J. S., "the effect of the surface wettability of nanoprotrusions formed on network-type microstructures," Journal of Micromechanics and Microengineering, Vol. 18, No. 12, Paper No. 125007, 2008.
  6. Kleijhorst, R. A., Offerhaus, H. L. and Bant, P., "Micro-machining workstation for a diode pumped Nd:YAG high-brightness laser system," Review of Scientific Instruments, Vol. 69, No. 5, pp. 2118-2119, 1998. https://doi.org/10.1063/1.1148908
  7. Bae, K. M., Ko, J. S., Park, S. H., Lim, T. W. and Yang, D. Y., "Fabrication of 3D Metallic Molds for Multi-replication of Microstructures," Journal of the KSPE, Vol. 26, No. 8, pp. 119-125, 2009.
  8. Lee, J. H. and Sohn, H. K., "Ultrafast Laser Micromachining Technology," Journal of the KSPE, Vol. 27, No. 2, pp. 7-12, 2010.
  9. Zalloum, O. H. Y., Parrish, M., Terekhov, A. and Hofmeister, W., "An amplified femtosecond laser system for material micro-/nanostructuring with an integrated Raman microscope," Review of Scientific Instruments, Vol. 81, No. 5, Paper No. 053906, 2010.
  10. Shirk, M. D. and Molian, P. A., "A review of ultrashort pulsed laser ablation of materials," Journal of Laser Apllications, Vol. 10, No. 2, pp. 18-28, 1998. https://doi.org/10.2351/1.521827

피인용 문헌

  1. A Study on Fabrication of Hydrophobic Modification on the Surface of Copper using 355nm-Pulsed Laser vol.23, pp.4, 2016, https://doi.org/10.6117/kmeps.2016.23.4.101