Acknowledgement
Supported by : 한국에너지기술평가원(KETEP)
References
- Smith, W. F., Structure and Properties of Engineering Alloys," 2nd ed., McGraw-Hill, New York(1994).
- Ueda, R., "Chemical Machining by Ferric Chloride Etchant," Corrosion Eng., 38, 231-237(1989).
- Lewis, R. J., Sir, "Sax's Dangerous Properties of Industrial Materials," 8th ed., Van Norstrand Reinhold, New York(1992).
- Moscony, J. J., Maynard, R. B., Wetzel, C. M., Eshleman, C. C. and Saunders, M. H., "Optimization of the Ferric Chloride Etching of Shadow Masks," J. Sid, 4, 231(1996).
- Maynard, R. B., Moscony, J. J. and Saunders, M. H., "Ferric Chloride Etching of Low Carbon Steels," Rca. Rev., 45, 73(1984).
- Visser, A., Weissinger, D. and Ullmann, E., "Pray Etching, Mechanism of Removal, Removal Rate, and Surface Structure During Spray Etching of Stainless Steel with Ferric Chloride Part II," Galvanotechnik, 75, 14(1984).
- Visser, A., Weissinger, D. and Ullmann, E., "Material Processing by Spray Etching, Part II. Etching Precision," Galvanotechnik, 76, 442(1985).
- Allen, D. M., Hegarty, A. J. and Horne, D. F., "Surface Textures of Annealed AISI 304 Stainless Steel Etched by Aqueous Ferric Chloride-Hydrochloric Acid Solutions," Trans. Inst. Met. Finish., 59, 25(1981).
- Yoon, D., Lee, G. and Park, C., "Studies on the Ferric Chloride Etching of Shadow Masks," HWAHAK KONGHAK, 38(3), 393-397 (2000).
- Bird, R. B., Stewart, W. E. and Lightfoot, E. N., "Transport Phenomena," John Wiley & Sons, New York(1960).
- Ueda, R., Asakura, S., Tanozaki, Y. and Sugiura, T., Hyomen Gijutsu, 43, 48(1992). https://doi.org/10.4139/sfj.43.48
- Fischer, R. B. and Peters, D. G., "Quantitative Chemical Analysis," 3rd ed, W.B. Saunder Company, Philadelphia(1968).
Cited by
- 염화철 에칭 용액 재생을 위한 산화공정에 대한 연구 vol.26, pp.2, 2012, https://doi.org/10.7844/kirr.2017.26.2.18
- Spray Etching Rate Development of Stainless Steel in the Etchant for Printed Circuit Heat Exchanger Channels vol.105, pp.None, 2012, https://doi.org/10.1016/j.egypro.2017.03.957
- 염화철 에칭 용액 재생을 위한 액상 및 고상 산화제를 이용한 산화공정에 대한 연구 vol.23, pp.2, 2012, https://doi.org/10.7464/ksct.2017.23.2.158
- 철-니켈 합금 에칭구액 용매추출 공정 용액으로부터 고순도 탄산니켈 제조에 관한 연구 vol.27, pp.6, 2017, https://doi.org/10.6111/jkcgct.2017.27.6.303
- 파일럿 규모에서 철-니켈 합금 에칭폐액 재생 vol.23, pp.4, 2012, https://doi.org/10.7464/ksct.2017.23.4.393
- 에칭 폐액으로부터 용매추출과 가수분해를 이용한 니켈분말제조에 관한 연구 vol.25, pp.1, 2012, https://doi.org/10.7464/ksct.2019.25.1.014
- The Development of New Cost-Effective Optimization Technology for OLED Market Entry vol.17, pp.4, 2012, https://doi.org/10.15722/jds.17.4.201904.51