DOI QR코드

DOI QR Code

An Experimental Study on Bending Behaviour of Steel Grid Composite Deck Joint

격자형 강합성 바닥판 이음부의 휨거동에 관한 실험적 연구

  • 신현섭 (한국건설기술연구원 인프라구조연구실) ;
  • 이진형 (한국건설기술연구원 인프라구조연구실) ;
  • 박기태 (한국건설기술연구원 인프라구조연구실)
  • Received : 2012.03.06
  • Accepted : 2012.07.02
  • Published : 2012.09.30

Abstract

The joint of existing steel grid composite deck is composed of lap splice of reinforcing bar with end hooks and field-placed concrete. In this study, bending tests of deck joint composed of concrete shear key and high tension bolts are carried out for the design variable, concrete shear key strengthened with steel plate or not, and test results are compared with flexural performance of the existing deck joint. Test results showed that the mechanical deck joint has about 30% ~ 60% more ultimate bending strength than the existing joint. According to analysis results of moment-curvature relationship, the initial bending stiffness of the existing deck joint is some higher than that of mechanical joint. But, after crack failure the structural performance of the existing deck joint is rapidly reduced. Furthermore, the deck joint with the strengthened shear key with steel plate has more bending moment capacity than the deck joint without strengthening. And strengthening of shear key has positive influence on the increase of bending stiffness.

기존의 격자형 강합성 바닥판 이음부 상세는 후크형태의 철근 겹침이음 및 채움 콘크리트로 구성된다. 본 연구에서는 콘크리트 전단키와 고장력볼트로 구성된 이음부 형식에 대해 콘크리트 전단키 보강 유무를 실험변수로 휨성능평가 실험을 하였고, 그 결과를 기존 철근겹침 이음부의 휨성능과 비교 평가함으로써 기계적 연결방법에 의한 이음부 형식의 적용 가능성을 검토하였다. 실험결과의 비교 분석에 의하면, 기계적 연결방식에 의한 이음부의 최대내력이 약 30% ~ 60% 정도 더 큰 것으로 나타나서 강도 측면에서 더 우수함을 확인하였다. 모멘트-곡률 관계로부터 구한 휨강성을 비교해 보면, 철근겹침 이음부의 경우 초기 거동에서는 비교적 더 우수한 거동을 보였으나, 콘크리트 균열파괴가 발생한 이후에는 다소 급격한 단면성능의 감소를 보였다. 한편, 콘크리트 전단키의 강판 보강 유무에 따른 변수 분석 결과에 의하면 강판 보강구조가 최대내력 향상 및 휨강성 증가에 효과적임을 확인할 수 있었다.

Keywords

References

  1. 김성훈, 박영훈, 이승용, 최준혁, "역T형강 콘크리트 합성바닥판의 휨거동에 관한 실험적 연구", 대한토목학회논문집, 제28 권 3A호, 2007, pp.331-340.
  2. 신현섭, 이진형, 박기태, "격자형 강합성 바닥판의 휨거동에 대한 실험적 연구", 구조물진단학회지, 제15권 4호, 2011, pp.175-184.
  3. 이기승, 백진기, 구자성, 이안호, 성택룡, "경량전철용 I형강 격자바닥판에 관한 연구", 한국철도학회 추계학술대회논문집, 2000, pp.328-335.
  4. 정영수, 박창규, 김용곤, 김훈, "격자형 I-형강 합성바닥판의 성능 평가", 대한토목학회논문집, 제23권 1A호, 2003, pp.37-45.
  5. 한국건설기술연구원, 극한환경 대응 재료 및 급속 시공기술 개발, 2차년도 최종보고서, 2011, pp.79-137.
  6. D. S. Brown co., An introduction to exodermic bridge decks, Product profile, 2007, pp.1-8.
  7. Gase, P. M., Kaczinski, M. R., "The history and benefits of prefabricated grid reinforced concrete decks", 2010 Concrete Bridge Conference, Phoenix, Arizona, 2010, pp.405-412.
  8. Pierce, M. J., Evaluative testing of a novel weldless open steel grid deck system, master's thesis, Pittsburgh university, 2005, pp.1-33.
  9. Versace, J., Ramirez, J., Implementation of full-width bridge deck panels: A synthesis study, final report, FHWA/IN/JTRP-2003/24, Purdue university, 2004, pp.1-66.

Cited by

  1. Evaluation of the Bending Performance of a Modified Steel Grid Composite Deck Joint vol.17, pp.4, 2013, https://doi.org/10.11112/jksmi.2013.17.4.038
  2. Evaluation of Structural Behavior and Moment of Inertia on Modular Slabs Subjected to Cyclic Loading vol.19, pp.6, 2015, https://doi.org/10.11112/jksmi.2015.19.6.095
  3. Experimental Study on the Load Transfer Behavior of Steel Grid Composite Deck Joint vol.18, pp.4, 2014, https://doi.org/10.11112/jksmi.2014.18.4.010