열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제25권6호
  • /
  • Pages.283-291
  • /
  • 2012
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지
DOI QR코드

DOI QR Code

핫프레스포밍 공정에서 내산화 코팅처리가 TWB 용접부 특성에 미치는 영향

The Effect of Mechanical Property of Tailor Welding Blank and Hot Press Forming Process by the Different Anti-oxidation Coating Treatment on Boron-steel Sheet

  • 김상권 (한국생산기술연구원 인천지역센터) ;
  • 임옥동 ((주)오토젠 기술연구소) ;
  • 이재훈 (한국생산기술연구원 인천지역센터)
  • Kim, Sang-Gweon (Korea Institute of Industrial Technology (KITECH) Incheon Regional Division) ;
  • Lim, Ok-Dong (AUTOGEN) ;
  • Lee, Jae-Hoon (Korea Institute of Industrial Technology (KITECH) Incheon Regional Division)
  • 투고 : 2012.09.03
  • 심사 : 2012.10.13
  • 발행 : 2012.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In order to increase the anti-oxidation property during the tailor welding blanked hot press forming process for a high strength boron steel sheet, we performed a different coating method on the boron-steel sheet such as 87% Al - 13% Si and Fe - 8.87 Zn dipping plating procedure. However, during laser welding process, the Al-Si coated steel sheet has showed a low tensile strength and about half value of elongation than the original boron-steel sheet. Aluminum and silicon, elements of coating layer were diffused into the boron-steel matrix and have shown a low strength result than non-coated specimen. On the other hand, Zinc-coated boron-steel has expectedly showed a excellent tensile strength and micro-harness value in the welded area like original boron-steel.

키워드

참고문헌

  1. H. Karbasian and A. E. Tekkaya : Journal of Materials Processing Technology 210 (2010) 2103-2118. https://doi.org/10.1016/j.jmatprotec.2010.07.019
  2. 강수영, 이재성, 김종하, 이호기, 이경남 : 한국소성가공학회지 5-4 (1996) 263-268.
  3. Malek Naderi, Vitoon Uthaisangsuk, Ulrich Prahl, and Wolfgang Bleck : Steel research int. 79-2 (2008) 77-84. https://doi.org/10.1002/srin.200806320
  4. L. Vaissiere, J. P. Laurent, and A. Reihardt : Journals of Materials and Manufacturing, 111 (2003) 909-917.
  5. R. Kolleck, D. Steinhoefer, J. A. Feindt, and P. Bruneau : Manufacturing methods for safety and structural body parts for lightweight body de-sign, IDDRG, Conf. Proc., 2004, 167-173.
  6. L. Garcia Aranda, P. Ravier, and Y. Chstel : Hot stamping of quenchable steels, material data and process simulations, IDDRG, Conf. Proc., 2003, p. 155-164.
  7. 장정환, 주병돈, 이재호, 문영훈 : 한국열처리공학회, 21-4 (2008) 183-188.
  8. 정병훈, 공종판, 강정윤 : 대한금속재료학회지, 50-3 (2012) 224-232.
  9. S. P. Gupta : Materials Characterization 49 (2003) 269-291.
  10. 천창환, 한창석 : 열처리공학회지, 23-4 (2010) 183-190.
  11. R. Vierstraete, W. Ehling, F. Pinard, L. Cretteur, A. Pic, and Q. Yin : Industrial Laser Solutions 25 (2010) 6-14.
  12. B. H. Jung, J. P. Kong, and C. Y. Kang : Korean J. Met. Mater., 50(3) (2012) 224-232. https://doi.org/10.3365/KJMM.2012.50.3.224