DOI QR코드

DOI QR Code

저항접지 시스템에서 지락사고시 CLR과열 소손방지를 위한 GPT 정격용량의 적정성 연구

Analysis on the Protective Coordination with Hybrid Superconducting Fault Current Limiter

  • 신호전 (숭실대 공대 전기공학부) ;
  • 김진석 (숭실대 공대 전기공학부) ;
  • 박유환 (숭실대 공대 전기공학부) ;
  • 김재철 (숭실대 공대 전기공학부) ;
  • 조만영 (숭실대 공대 전기공학부)
  • 투고 : 2011.12.28
  • 심사 : 2012.03.06
  • 발행 : 2012.04.01

초록

Among the high distribution voltage consumers, high-capacity consumers are often applying the grounding resistance method in order to overcome demerits such as erroneous operation of the ground reply or potential increase in the battery at the accident of the isolated neutral system. In this paper, to prevent damage to CLR and GPT in the delay to block the breakdown in the resistance grounded neutral system, this study aims to provide a proper suggestion for continuous rating capacity of GPT to check the appropriateness of CLR size and reduce GPT burden. Thereupon, this study comparatively analyzes CLR current applied in general GPT and the current gained when CLR demanded in the system is used and analyzes the simulated system through simulation using PSCAD/EMTDC in order to suggest GPT's proper continuous rating capacity.

키워드

참고문헌

  1. IEEE Std. 142-2007 IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems.
  2. IEEE Std. 80-2000 IEEE Guide for Safety in AC Substation Grounding.
  3. IEEE Std. 1100, IEEE Recommended Practice for Powering and Grounding Electronic Equipment (IEEE Emerald Book). 6, 7.
  4. Kaufmann, R. H., "Some Fundamentals of Equipment Grounding Circuit Design", IEEE IGA, vol. 73, part 2, November 1954.
  5. NFPA 70, "National Electrical $Code{\circledR}$ ($NEC{\circledR}$).8".
  6. West, R. B., "Equipment Grounding for Reliable Ground Fault Protection in Electrical Systems below 600 Volts", IEEE Transactions on Industry Applications, vol. IA-10, no. 2, pp. 175-189, 1974. https://doi.org/10.1109/TIA.1974.349132
  7. Zipse, D. W., "Multiple Neutral to Ground Connections", IEEE I&CPS Technical Conference, pp. 60-64, 1972.
  8. Buschart, R. J., "Computer Grounding and the National Electrical Code", IEEE Transactions on Industry Applications, vol. IA-23, no. 3, pp. 404-407, 1987. https://doi.org/10.1109/TIA.1987.4504924
  9. Zipse, W. Donald, "Grounding for Process Control Computers and Distributed Control Systems: The National Electrical Code and Present Grounding Practice", IEEE Transactions on Industry Applications, vol. IA-23, no. 3, pp. 417-423, 1987. https://doi.org/10.1109/TIA.1987.4504927
  10. IEEE 100, "The Authoritative Dictionary of IEEE Standards Terms, Seventh Edition". New York: Institute of Electrical and Electronics Engineers, Inc.
  11. Lee, R. H., "Grounding of Computers and Other Similar Sensitive Equipment", IEEE Transactions on Industry Applications, vol. IA-23, no. 3, pp. 408-411, 1987. https://doi.org/10.1109/TIA.1987.4504925
  12. 송길영, "송배전공학", 동일출판사, 1998.
  13. 송길영, "전력계통공학", 동일출판사, 1998.
  14. 이성우, "지락보호시스템", 기다리, 2003.
  15. 이존우, "송전공학", 태영문화사, 2009.
  16. 이존우, "배전 발전계통공학", 태영문화사, 2009.