DOI QR코드

DOI QR Code

Silicone Injection Mold & Molding Technology for Super-hydrophobic Curved Surface

초발수 곡면표면 실리콘 사출금형성형기술

  • 이성희 (한국생산기술연구원 금형기술센터) ;
  • 강정진 (한국생산기술연구원 미래융합연구그룹) ;
  • 이종원 (한국생산기술연구원 금형기술센터) ;
  • 홍석관 (한국생산기술연구원 미래융합연구그룹) ;
  • 고종수 (부산대학교 기계공학부) ;
  • 이제훈 (한국기계연구원 광응용기계연구실) ;
  • 노지환 (한국기계연구원 광응용기계연구실)
  • Received : 2011.11.14
  • Accepted : 2011.11.24
  • Published : 2012.01.01

Abstract

In this study, silicone injection molding technology with curved thermoplastic insert was developed to produce super-hydrophobic surface. Thermoplastic insert part and injection mold design of base plastic cover were performed to produce cost effective hydrophobic surface part. An optimization process of part thickness for thermoplastic insert part was performed with transient thermal analysis under silicone over-molding process condition. Structural thermal analysis of silicone injection mold was also performed to obtain uniform temperature condition on the surface of micro-patterned mold core. Super-hydrophobic surface for the silicone injection molded part with thermoplastic insert could be verified from the measurement of contact angle. It was shown that the averaged contact angle was over $140^{\circ}$.

Keywords

References

  1. Yuanxiang, Z., Jianyi, W., Haihang, C., Qiong, N., Qinghua, S. and Yunshan, W., "The influence of prestressing on breakdown characteristics in liquid silicone rubber," Journal of Electrostatics, Vol. 67, No. 2-3, pp. 422-425, 2009. https://doi.org/10.1016/j.elstat.2009.01.029
  2. Tong, C., Lin, C. W., Chien, C. H., Chao, Y. J. and Van Zee, J. W., "Service life estimation of liquid silicone rubber seals in polymer electrolyte membrane fuel cell environment," Journal of Power Sources, Vol. 196, No. 3, pp. 1216-1221, 2011. https://doi.org/10.1016/j.jpowsour.2010.08.075
  3. Barthlott, W. and Neinhuis, C., "Purity of the Sacred Lotus, or escape from contamination in biological surfaces," Planta, Vol. 202, No. 1, pp. 1-8, 1997. https://doi.org/10.1007/s004250050096
  4. Onda, T., Shibuichi, S., Satoh, N. and Tsuji, K., "Super-water-repellent fractal surfaces," Langmuir, Vol. 12, No. 9, pp. 2125-2127, 1996. https://doi.org/10.1021/la950418o
  5. Tadanaga, K., Katata, N. and Minami, T., "Super- Water-Repellent Al2O3 Coating Films with High Transparency," J. Am. Ceram. Soc., Vol. 80, No. 4, pp. 1040-1042, 1997.
  6. Bico, J., Marzolin, C. and Querem, D., "Pearl Drops," Europhysics Lett. Vol. 47, No. 2, pp. 220-226, 1999. https://doi.org/10.1209/epl/i1999-00548-y
  7. Khorasani, M. T., Mirzadeh, H. and Kermani, Z., "Wettability of porous polydimethylsiloxane surface: morphology study," Appl. Surf. Sci., Vol. 242, No. 3- 4, pp. 339-345, 2005. https://doi.org/10.1016/j.apsusc.2004.08.035
  8. Jin, M. H., Feng, X. J., Xi, J. M., Zhai, J., Cho, K. W., Feng, L. and Jiang, L., "Superhydrophobic PDMS surface with ultra-low adhesive force," Macromol. Rapid Commun., Vol. 26, No. 22, pp. 1805-1809, 2005. https://doi.org/10.1002/marc.200500458
  9. Sun, M. H., Luo, C. X., Xu, L. P., Ji, H., Qi, O. Y., Yu, D. P. and Chen, Y., "Artificial lotus leaf by nanocasting," Langmuir, Vol. 21, No. 19, pp. 8978- 8981, 2005. https://doi.org/10.1021/la050316q
  10. Noh, J. W., Lee, J. H., Na, S. J., Lim, H. E. and Jung, D. H., "Fabrication of Hierarchically Micro- and Nano-structured Mold Surfaces Using Laser Ablation for Mass Production of Superhydrophobic Surfaces," Jpn. J. Appl. Phys., Vol. 49, No. 10, Paper No. 106502, 2010.
  11. Lee, S. M., Oh, D. J., Jung, I. D., Bae, K. M., Jung, P. G., Chung, K. H., Cho, S. J. and Ko, J. S., "Fabrication of Nickel Micromesh Sheets and Evaluation of their Water-repellent and Water-proof Abilities," International Journal of Precision Engineering and Manufacturing, Vol. 10, No. 3, pp. 161-166, 2009. https://doi.org/10.1007/s12541-009-0062-8