Progress in Superconductivity

한국초전도학회 (The Korean Superconductivity Society)
권호 표지

High-$T_c$ SQUID Application for Roll to Roll Metallic Contaminant Detector

  • Tanaka, S. (National University Corporation, Toyohashi University of Technology) ;
  • Kitamura, Y. (National University Corporation, Toyohashi University of Technology) ;
  • Uchida, Y. (National University Corporation, Toyohashi University of Technology) ;
  • Hatsukade, Y. (National University Corporation, Toyohashi University of Technology) ;
  • Ohtani, T. (Advance Food Technology Co., Ltd.) ;
  • Suzuki, S. (Advance Food Technology Co., Ltd.)
  • 투고 : 2012.12.17
  • 심사 : 2012.12.20
  • 발행 : 2012.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A sensitive eight-channel high-Tc Superconducting Interference Device (SQUID) detection system for magnetic contaminant in a lithium ion battery anode was developed. Finding ultra-small metallic foreign matter is an important issue for a manufacturer because metallic contaminants carry the risk of an internal short. When contamination occurs, the manufacturer of the product suffers a great loss from recalling the tainted product. Metallic particles with outer dimensions smaller than 100 microns cannot be detected using a conventional X-ray imaging system. Therefore, a highly sensitive detection system for small foreign matter is required. We have already developed a detection system based on a single-channel SQUID gradiometer and horizontal magnetization. For practical use, the detection width of the system should be increased to at least 65 mm by employing multiple sensors. In this paper, we present an 8-ch high-Tc SQUID roll-to-roll system for inspecting a lithium-ion battery anode with a width of 65 mm. A special microscopic type of a cryostat was developed upon which eight SQUID gradiometers were mounted. As a result, small iron particles of 35 microns on a real lithium-ion battery anode with a width of 70 mm were successfully detected. This system is practical for the detection of contaminants in a lithium ion battery anode sheet.

키워드

참고문헌

  1. T. Nagaishi, H. Ota, K. Nishi, K. Kuwa, T. Fujita, and S. Tanaka, "First practical high-$T_c$ SQUID system for the detection of magnetic foreign substances in commercial products", IEEE Transactions on Applied Superconductivity, vol. 17, pp. 800-803, 2007. https://doi.org/10.1109/TASC.2007.898052
  2. S. Tanaka, H. Fujita, Y. Hatsukade, T. Nagaishi, K. Nishi, H. Ota, T. Otani, and S. Suzuki, "A food contaminant detection system based on high-$T_c$ SQUIDs", Supercond. Sci. Technol, vol. 19, pp. S280-S283, 2006. https://doi.org/10.1088/0953-2048/19/5/S24
  3. H. J. Krause, G. I. Panaitov, N. Wolter, D. Lomparski, W. Zander, Y. Zhang, E. Oberdoerffer, D. Wollersheim, and W. Wilke, "Detection of magnetic contaminations in industrial products using HTS SQUIDs", IEEE Trans. on Appl. Supercond., vol. 15, pp. 729-732, 2005. https://doi.org/10.1109/TASC.2005.850027
  4. M. Bick, P. Sullivan, D. L. Tilbrook, J. Du, B. Thorn, R. Binks, C. Sharman, K. E. Leslie, A. Hinsch, K. Macrae, and C. P. Foley, "A SQUID-based metal detector: comparison to coil and X-ray systems", Supercond. Sci. Technol., vol. 18, pp. 346-351, 2005. https://doi.org/10.1088/0953-2048/18/3/024
  5. S. Tanaka, H. Fujita, Y. Hatsukade, T. Otani, S. Suzuki, and T. Nagaishi, "A high-$T_c$ SQUID micro-detector with a high performance magnetic shield for industrial products", Supercond. Sci. Technol., vol. 20, pp. S385-S388, 2007. https://doi.org/10.1088/0953-2048/20/11/S16
  6. S. Tanaka, T. Akai, Y. Hatsukade, T. Ohtani, Y. Ikeda, S. Suzuki, and H. A. K. Tanabe, "High -$T_c$ SQUID detection system for metallic contaminant in lithium ion battery", IEEE Trans. Magn., vol. 45, pp. 4510-4513, 2009. https://doi.org/10.1109/TMAG.2009.2021857
  7. S. Tanaka, T. Akai, Y. Kitamura, Y. Hatsukade, T. Otani, and S. Suzuki, "Two-channel HTS SQUID gradiometer system for detection of metallic contaminants in lithium-ion battery", IEEE Trans. Appl. Supercond, vol. 21, pp. 432-435, 2011. https://doi.org/10.1109/TASC.2010.2090853
  8. S. Tanaka, Y. Kitamura, Y. Hatsukade, T. Ohtani, and S. Suzuki, "Metallic contaminant detection system using multi-channel high-$T_c$ SQUIDs", Journal of Magnetism and Magnetic Materials, vol. 324, pp. 3487-3490, 2012. https://doi.org/10.1016/j.jmmm.2012.02.072
  9. S. Tanaka, K. Matsuda, O. Yamazaki, M. Natsume, and H. Ota, "Development of high--$T_c$ microscope with flux guide", Supercond. Sci. and Technology, vol. 15, pp. 146-149, 2002. https://doi.org/10.1088/0953-2048/15/1/326
  10. K. Yamazaki, Y. Hatsukade, S. Tanaka, and A. Haga, "Shield duct to prevent magnetic field leakage through openings in double-layered magnetically shielded rooms", IEEE Trans. on Magnetics, vol. 44, pp. 4187-4190, 2008. https://doi.org/10.1109/TMAG.2008.2002524