References
- M. Koc, T. Altan, 2002, Prediction of Forming Limits and Parameters in the Tube Hydroforming Process, Int. J. Mach. Tools Manuf., Vol. 42, No. 1, pp. 123-138. https://doi.org/10.1016/S0890-6955(01)00048-7
- H. L.Xing, A. Makinouchi, 2001, Numerical Analysis and Design for Tubular Hydroforming, J. Mech. Sci., Vol. 43, No. 4, pp. 1009-1026. https://doi.org/10.1016/S0020-7403(00)00046-1
- F. dohmann, Ch. Hartl, 1997, Tube Hydroforming Research and Practical Application, J. Mater. Process. Technol., Vol. 71, No. 1, pp. 174-186. https://doi.org/10.1016/S0924-0136(97)00166-0
- O. Kreis, P. Hein, 2001, Manufacturing System for the Integrated Hydroforming, Trimming and Welding of Sheet Metal Pairs, J. Mater. Process. Technol., Vol. 115, No. 1, pp. 49-54. https://doi.org/10.1016/S0924-0136(01)00763-4
- L. Lang, G. Gu, T. Li, X. Zhou, 2008, Numerical and Experimental Confirmation of the Calibration Stage's Effect in Multi-operation Sheet Hydroforming using Poor-formability Materials, J. Mater. Process. Technol., Vol. 201, No. 1-3, pp. 97-100. https://doi.org/10.1016/j.jmatprotec.2007.11.233
- L. H. Lang, Z. R. Wang, D. C. Kang, S. J. Yuan, S. H. Zhang, J. Danckert, K. B. Nielsen, 2004, Hydroforming Highlights: Sheet Hydroforming and Tube Hydroforming, J. Mater. Process. Technol., Vol. 151, No. 1-3, pp. 165-177. https://doi.org/10.1016/j.jmatprotec.2004.04.032
- H. U. Lucke, Ch. Hartl, T. Abbey, 2001, Hydroforming, J. Mater. Process. Technol., Vol. 115, No. 1, pp. 87-91. https://doi.org/10.1016/S0924-0136(01)00774-9
- F. Dohmann, Ch. Hartl, 1996, Hydroforming a Method to Manufacture Light-Weight Part, J. Mater. Process. Technol., Vol. 60, No. 1-4, pp. 669-676. https://doi.org/10.1016/0924-0136(96)02403-X
- H. K. Yi, Y. H. Moon, J. H. Lee, Y. S. Lee, 2007, Prediction for Forming Limit of Tube Warm Hydroforming based on the Ductile Fracture Criteria, Trans. Mater. Process., Vol. 16, No. 6, pp. 426-431. https://doi.org/10.5228/KSPP.2007.16.6.426
- I. K. Lee, J. M. Lee, Y. K. Son, C. J. Lee, B. M. Kim, 2011, Experiment and FE Analysis of Hot Curvature-forming for Aluminum Thick Plate using Grid-typed Hybrid Die, Trans. Mater. Process., Vol. 20, No. 4, pp. 316-323. https://doi.org/10.5228/KSTP.2011.20.4.316
- J. S. Kim, K. S. Kim, S. H. Shim, J. G. Eom, M. S. Joun, 2010, Die System for Avoiding Thickness Reduction Along the Bent Corner in Warm Plate Forging of an Axle Housing, Trans. Mater. Process., Vol. 19, No. 8, pp. 447-451. https://doi.org/10.5228/KSTP.2010.19.8.447
Cited by
- Enhancement of Hydroformability Through the Reduction of the Local Strain Concentration vol.23, pp.5, 2014, https://doi.org/10.5228/KSTP.2014.23.5.317
- Analysis of Defect Characterization in a Rectangular Shape Flange Hydroforming Process vol.22, pp.5, 2013, https://doi.org/10.5228/KSTP.2013.22.5.275
- Effect of Loading Path on the Hydroformability of a Three-layered Tube for Fabrication of a Hollow Part vol.22, pp.1, 2013, https://doi.org/10.5228/KSTP.2013.22.1.17