Journal of Welding and Joining

  • 제30권5호
  • /
  • Pages.22-26
  • /
  • 2012
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

A6061-T6/AZ31 이종금속 마찰교반접합부의 기계적 특성에 미치는 툴 삽입 위치의 영향

Effects of Tool Plunge Position on Mechanical Properties of Friction-stir-weleded Region in A6061-T6/AZ31 Dissimilar Metals

  • 이광진 (한국생산기술연구원 친환경부품소재센터) ;
  • 김상혁 (한국생산기술연구원 친환경부품소재센터)
  • Lee, Kwang-Jin (Environmental Materials & Components Center, Korea Institute of Industrial Technology) ;
  • Kim, Sang-Hyuk (Environmental Materials & Components Center, Korea Institute of Industrial Technology)
  • 발행 : 2012.10.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Butt-joints of A6061-T6 and AZ31 plates were successfully manufactured by using a friction stir welding method. Off-set free joints and off-set joints were fabricated to investigate the effect of the tool plunge position on the mechanical properties of the joints. Hardness test, tensile test and charpy impact test was performed to evaluate the mechanical properties of the joints. Off-set condition resulted in increase of mechanical properties of the joints. The variation of the hardness distribution in the SZ was also stabilized in the off-set condition. Tensile strength of the off-set joint was about 85% against to that of the AZ31 base metal. Impact absorption energy by Charpy-Impact-Test of the off-set joint also increased by almost 2 times against to that of the AZ31 base metal.

키워드

참고문헌

  1. kwang-jin Lee, Shinji Kumai and Takashi Arai : Materials Transactions, 46 (2005) 1847-1856 https://doi.org/10.2320/matertrans.46.1847
  2. kwang-jin Lee and Shinji Kumai : Materials Transactions, 47 (2006) 1178-1185 https://doi.org/10.2320/matertrans.47.1178
  3. kwang-jin Lee, Shinji Kumai, takashi Arai and Tomokatsu Aizawa : Materials Science and Engineering A, 471 (2007) 95-101 https://doi.org/10.1016/j.msea.2007.04.033
  4. Shinji Kumai, Hiromasa Sato, Kenta Suzuki, Takeshi Ookawa, Kwangjin Lee and Mitsuhiro Watanabe : Journal of Japan Institute of Light Metals, 57 (2007) 529-535 (in Japanese) https://doi.org/10.2464/jilm.57.529
  5. R. Ayer, H. W. Jin, R. R. Mueller, S. Ling and S. Ford : Scripta Materialia, 53 (2005) 1383-1387 https://doi.org/10.1016/j.scriptamat.2005.08.042
  6. Mitsuhiro Watanabe and Shinji Kumai : Materials Science Forum, 654-656 (2010) 755-758 https://doi.org/10.4028/www.scientific.net/MSF.654-656.755
  7. Shinji Kumai, Mitsuhiro Watanabe and Keyan Feng : Materials Science Forum, 654-656 (2010) 596-601. https://doi.org/10.4028/www.scientific.net/MSF.654-656.596
  8. Keyan Feng, Mitsuhiro Watanabe and Shinji Kumai : Materials Science Forum, 654-656 (2010) 970-9 73 https://doi.org/10.4028/www.scientific.net/MSF.654-656.970
  9. Liu Xu-he : Transactions of Nonferrous Metal Society of China, 21 (2011) 477-481 https://doi.org/10.1016/S1003-6326(11)60739-5
  10. L. M. Liu : Materials Characterization, 59 (2008) 1279-1284 https://doi.org/10.1016/j.matchar.2007.10.012

피인용 문헌

  1. Friction Stir Welding of 900MPa Grade TWIP Steel vol.32, pp.2, 2014, https://doi.org/10.5781/JWJ.2014.32.2.9