DOI QR코드

DOI QR Code

Evaluation on Potentiostatic Characteristics of Al-4.06Mg-0.74Mn Alloy with Cavitation Environment in Seawater

Al-4.06Mg-0.74Mn 합금의 해수 내 캐비테이션 환경에 따른 정전위 특성 평가

  • Lee, Seung-Jun (Division of Marine Engineering, Mokpo Maritime University) ;
  • Han, Min-Su (Division of Marine Engineering, Mokpo Maritime University) ;
  • Jang, Seok-Ki (Division of Marine Engineering, Mokpo Maritime University) ;
  • Kim, Seong-Jong (Division of Marine Engineering, Mokpo Maritime University)
  • 이승준 (목포해양대학교 기관시스템공학부) ;
  • 한민수 (목포해양대학교 기관시스템공학부) ;
  • 장석기 (목포해양대학교 기관시스템공학부) ;
  • 김성종 (목포해양대학교 기관시스템공학부)
  • Received : 2012.12.17
  • Accepted : 2012.12.30
  • Published : 2012.12.31

Abstract

The hull of a fast sailing aluminium ship are generally prone to erosion owing to the impact of seawater. At this time, synergistic effects of the erosion and the corrosion by aggressive ions such as chlorides tend to aggravate the damage. There have been various attempts, including selection of erosion-resistant materials, cathodic protection and addition of corrosion inhibitors, to overcome damage by erosion or corrosion under marine environments. These approaches, however, have limits on identifying the damage mechanism clearly, because they depend on analogical interpretation by correlating two damage behaviors after the individual studies are assessed. In this research, it was devised a hybrid testing apparatus that integrates electrochemical corrosion test and cavitation test, and thus the erosion-corrosion behavior by cavitation was investigated more reliably. As a result, the slightest damage was observed at the potentials between -1.6 V and -1.5 V. This is considered to be due to a reflection or counterbalancing effect caused by collision of the cavitation cavities and the hydrogen gas formed by activation polarization.

Keywords

References

  1. Properties and Selection: Irons, Steels, and High- Performance Alloys, A.S.M. Handbook, (1990) 883.
  2. S. J. Kim, S. K. Jang, J. I. Kim, Materials Science- Poland, 26 (2008) 779.
  3. M. Sakairi, Y. Shimoyama, D. Nagasawa, Corros. Sci. Tech., 7 (2008) 168.
  4. Y. J. Chun, Y. H. Chung, Y. H. Lee, M. C. Shin, J. Korean Inst. Metals, 28 (1990) 217.
  5. S. J. Lee, S. J. Kim, Corros. Sci. Tech., 11 (2012) 205.
  6. F. T. Cheng, C. T. Kwok, H. C. Man, Surface and Coatings Technology, 139 (2001) 14. https://doi.org/10.1016/S0257-8972(00)01103-8
  7. S. J. Kim, S. J. Lee, Corros. Sci. Tech., 10 (2011) 136.
  8. C. H. Tang, F. T. Cheng, H. C. Man, Surface and Coatings Technology, 182 (2004) 300. https://doi.org/10.1016/j.surfcoat.2003.08.048
  9. M. S. Han, S. J. Lee, S. K. Jang, S. J. Kim, Corros. Sci. Tech., 9 (2010) 317.
  10. S. J. Kim, S. J. Lee, Corros. Sci. Tech., 10 (2011) 101.
  11. S. J. Kim, S. J. Lee, S. K. Jang, K. H. Kim, Trans. Nonferrous Met. Soc. China, (2012) Accepted.
  12. C. S. Lee, I. Y. Bae, K. J. Kim, K. M. Moon, M. H. Lee, J. Kor. Inst. Surf. Eng, 37 (2004) 253.
  13. C. Deslouis, D. Festy, O. Gil, G. Rius, Electrochimica Acta, 43 (1998) 1891. https://doi.org/10.1016/S0013-4686(97)00303-4
  14. C. Deslouis, D. Festy, O. Gil, V. Maillot, S. Touzain, Electrochimica Acta, 45 (2000) 1837. https://doi.org/10.1016/S0013-4686(99)00403-X
  15. L. J. Simpson, Electrochimica Acta, 43 (1998) 2543. https://doi.org/10.1016/S0013-4686(97)10167-0
  16. D. F. hasson, C. R. Corwe, Materials for Marine System and Structure, Academic press, 28 (1998).
  17. S. J. Kim, J. Y. Ko, Journal of the Korean Society of Marine Engineering, 30 (2006) 157.
  18. J. C. Park, S. J. Lee, S. J. Kim, J. Kor. Inst. Surf. Eng., 44 (2011) 277. https://doi.org/10.5695/JKISE.2011.44.6.277
  19. A. M. Elhoud, N. C. Renton, W. F. Deans, International Journal of Hydrogen Energy, 35 (2010) 6455. https://doi.org/10.1016/j.ijhydene.2010.03.056
  20. T. Michler, J. Naumann, International Journal of Hydrogen Energy, 35 (2010) 821. https://doi.org/10.1016/j.ijhydene.2009.10.092
  21. T. Michler, Y. W. Lee, R. P. Gangloff, J. Naumann, International Journal of Hydrogen Energy, 34 (2009) 3201. https://doi.org/10.1016/j.ijhydene.2009.02.015
  22. Y. Zheng, S. Luo, W. Ke, Wear, 262 (2007) 1308. https://doi.org/10.1016/j.wear.2007.01.006
  23. G. Bregliozzia, A. D. Schinob, S. I. U. Ahmeda, J. M. Kennyb, H. Haefkea, Wear, 258 (2005) 503. https://doi.org/10.1016/j.wear.2004.03.024
  24. Z. Ahmad, Principle of Corrosion Engineering and Corrosion Control, IchemE, UK, (2006) 246.