Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Investigation on Applicability of 2400 MPa Strand for Posttensioned Prestressed Concrete Girders

포스트텐션 PSC 거더에 대한 2400 MPa급 강연선의 적용성 분석

  • Park, Ho (Dept. of Civil and Environmental Engineering, Seoul National University) ;
  • Cho, Jae-Yeol (Dept. of Civil and Environmental Engineering, Seoul National University) ;
  • Kim, Jee-Sang (Dept. of Civil Engineering, SeoKyeong University)
  • 박호 (서울대학교 건설환경공학부) ;
  • 조재열 (서울대학교 건설환경공학부) ;
  • 김지상 (서경대학교 토목건축공학과)
  • Received : 2012.07.18
  • Accepted : 2012.09.19
  • Published : 2012.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, a high-strength strand of 2400 MPa was developed using domestic technologies. In 2011, KS D 7002 was revised to cover the newly developed high-strength strands to support their practical usage. Presently, however, discussions and evaluations are not sufficient on the mechanical properties of the strands and their performance in structural members. Also, there were no detailed reviews on the need to revise the current design code for practical use of the high-strength strands. In this study, flexural behavior of a member with the high-strength strands was estimated through sectional analysis and a review and comparison of the domestic and foreign design codes were conducted considering the analysis results. Also, the need for the revision of the design code was discussed. Such discussion especially focused on the estimation of the stress in strand, which related with various issues such as determination methods for yield point of strands, time-dependent loss of prestressing force, estimation of stress in strand at member failure, and net strain limit for ductile failure of member. The discussion revealed that some parts in the design code need a revision and the further studies are required.

최근 국내 기술로 기존의 PS 강연선보다 인장강도가 크게 증가한 2400 MPa급 고강도 강연선이 세계 최초로 개발되었다. KS D 7002는 2011년 고강도 강연선을 반영하는 개정을 통하여 고강도 강연선의 실용화를 뒷받침하였다. 그러나 고강도 강연선의 역학적 특성과 구조물 적용시 실제 성능에 대한 논의와 검증이 아직 미비한 실정이고 고강도 강연선의 적용을 위한 설계기준의 개정 여부 역시 자세한 검토가 이루어지지 않았다. 고강도 강연선의 실용화를 위해서는 이러한 성능 검증과 설계기준 검토가 우선 수행될 필요가 있다. 이 연구에서는 휨성능 검증 실험에 앞서 단면해석을 통해 휨거동을 예측하였으며 해석 결과를 바탕으로 국내외 설계기준을 비교 검토하였다. 또한 고강도 강연선의 적용에 따른 현 설계기준의 개정 필요성을 논의하였다. 휨거동 측면에서 집중적으로 논의된 부분은 강연선의 응력 추정이었으며 이와 관련하여 강연선의 항복점 정의방법, 고강도 강연선의 장기 손실, 부재 파괴시 강연선 응력 추정식, 부재 연성파괴를 보장하기 위한 인장지배변형률 한계를 논의하였다. 논의 결과 일부 개정 필요성이 제기되었으며 이에 대한 추가의 연구가 필요할 것으로 판단된다.

Keywords

References

  1. Kim, J. K., Lee, P. G., and Lee, M. S., "Development of 2160 MPa PS Strand and Application Technology," Magazine of the Korea Concrete Institute, Vol. 22 No. 5, 2010, pp. 68-70.
  2. Kim, J. K., Lee, P. G., and Kim, C. E., "Design and Behavior of PSC Girder with 2160 MPa/2400 MPa PS Strand," Proceedings of the Korea Concrete Institute, Vol. 24, No. 1, 2012, pp. 833-834.
  3. KS D 7002, "Uncoated Stress-Relieved Steel Wires and Strands for Prestressed Concrete," Korean Agency for Technology and Standards, Ministry of Knowledge Economy, 2011, 14 pp.
  4. Collins, M. P. and Mitchell, D., Prestressed Concrete Structures, Prentice Hall, New Jersey, 1991, 766 pp.
  5. American Concrete Institute, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, Farmington Hills, Michigan, USA, 2011, 503 pp.
  6. Korea Concrete Institute, Concrete Design Code and Commentary, Kimoondang Publishing Company, 2007, 523 pp.
  7. Popovics, S., "A Numerical Approach to the Complete Stress-Strain Curve of Concrete," Cement and Concrete Research, Vol. 3, No. 5, 1973, pp. 483-599.
  8. Gowripalan, N. and Zou, X. W., "Flexural Behavior and Ductility of Prestressed Beams with High-Strength Concrete," American Concrete Institute, SP172-31, 1999, pp. 573-600.
  9. Mattock, A. H., "Modification of ACI Code Equation for Stress in Bonded Prestressed Reinforcement at Flexural Ultimate," ACI Journal, Vol. 81, No. 4, 1984, pp. 331-339.
  10. Harajli, M. H. and Naaman, A. E., "Evaluation of the Ultimate Steel Stress in Partially Prestressed Flexural Members," PCI Journal, Vol. 30, No. 5, 1985, pp. 54-81. https://doi.org/10.15554/pcij.09011985.54.81
  11. ASTM A416/A416-M, "Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressing Concrete," American Society of Testing Material, ASCE, 2010, 5 pp.
  12. European Committee for Standardization, Eurocode 2-Design of Concrete Structures, Brussels, 2002, pp. 42-43.
  13. Tadros, M. K., Al-Omaishi, N., Sequirant, S. J., and Gallt, J. G., Prestress Losses in Pretensioned High-Strength Concrete Bridge Girders, NCHRP 496, Transportation Research Board, National Research Council, Washington, DC, 2003, pp. 11-12.
  14. American Association of State Highway and Transportation Officials, AASHTO LRFD Bridge Design Specifications, 5th Edition, Washington, DC, USA, 2010, pp. 5-108-5-114.
  15. Loov, R. E., "A General Equation for the Steel Stress for Bonded Prestressed Concrete Members," PCI Journal, Vol. 33, No. 6, 1988, pp. 108-137.

Cited by

  1. Transfer lengths of pretensioned concrete members reinforced with 2400 MPa high-strength prestressing tendons vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.779