설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제24권12호
  • /
  • Pages.875-880
  • /
  • 2012
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

요철형상의 CFD 해석을 통한 대용량 로타형 폐열회수열교환기 성능에 관한 연구

Research on Performance of Large Rotor-type Heat Recovery Exchanger using CFD Analysis on Surface Corrugation

  • 김동규 (부경대학교 냉동공조공학과) ;
  • 하병용 (한국지역난방공사) ;
  • 김근오 ((주)서번산업엔지니어링) ;
  • 금종수 (부경대학교 냉동공조공학과) ;
  • 정석권 (부경대학교 냉동공조공학과)
  • Kim, Dong-Gyu (Department of Refrigeration and Air conditioning Engineering, Pukyung National University) ;
  • Ha, Byeong-Yong (Korea District Heating Corp.) ;
  • Kim, Kun-Oh (Seobun Engineering Co., Ltd.) ;
  • Kum, Jong-Soo (Department of Refrigeration and Air conditioning Engineering, Pukyung National University) ;
  • Jeong, Seok-Kwon (Department of Refrigeration and Air conditioning Engineering, Pukyung National University)
  • 투고 : 2012.10.25
  • 발행 : 2012.12.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The field of the large volume heat exchanger for wasted heat recovery ventilation system is being expanded enormously seeing as the fact that the quantity of reducing energies are huge due to the large volume heat exchanger for wasted heat recovery system at large buildings and factories, which consume large amount of energies while it has been arising huge amount of losses in Korea because of the lack of technology. To develop large volume waste heat recovery heat exchanger, rotor type heat exchanger was simulated for the surface corrugation. Based on the simulation results produced $30,000m^3/h$ grade waste heat recovery, heat exchanger was performed for the actual experiment. In addition, performance tests exceed the capacity of a large waste heat recovery heat exchanger performance test methods proposed.

키워드

참고문헌

  1. Yoo, S. Y., Kim, J. H., Chung, M. H., and Jie, M. S., 2008, A Study on the Performance Prediction of Paper Heat Exchanger for Exhaust Heat Recovery, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 17, No. 6, pp. 372-380.
  2. Ha, B. Y., Im, H. S., Kim, D. G., Kum, J. S., Jeong, S. K., Chung, Y. H., Kim, G. H., and Myeong, J. P., 2009, Experiment Results of 30,000 CMH class Heat Exchangers for Wasted Heat Recovery in Winter, Proceedings of the SAREK Summer Annual Conference, pp. 83-86.
  3. Ha, B. Y., Im, H. S., Kim, D. G., Kum, J. S., Jeong, S. K., Chung, Y. H., Kim, G. H., and Myeong, J. P., Experiment Results of 30,000 CMH class Heat Exchangers for Wasted Heat Recovery in Summer, Proceedings of the SAREK Winter Annual Conference, pp. 381- 384.
  4. Seo Bun Engineering, 2009, Development of high value-added heat recovery ventilation system, The Ministry of Knowledge Economy.
  5. Jeong, M. H., 2009, Development of energy-saving ventilation system using a plastic heat exchanger, Technical Intelligence in DAERIM Vol. 89, pp. 39-50.
  6. Choi, J. Y., International standardization of heat recovery ventilators, Korea Testing Laboratory.
  7. ANSI/ASHRAE Standard 84-2008.
  8. ARI, 2005, Standard.
  9. JIS B 8620(2003 edition).
  10. KS B 6879, Heat recovery ventilators, Korea Industrial Standards Commission.