Acknowledgement
Supported by : 서울과학기술대학교
References
- Lee, J., Kim, W., Ahn, D. H. and Lee, Y. H., 2001, "Laser Soldering for Chip-on-Glass Mounting in Flat Panel Display Application," Journal of ELECTRONIC MATERIALS, Vol. 30, No. 9, pp. 1255-1261. https://doi.org/10.1007/s11664-001-0158-0
- Kang, H. J., Seo, J., Lee, J. H., Kim, J. O., Sin, H. W. and Kim, D. Y., 2006, "Research on Laser Soldering of Micro Solder-balls," Korean Society for Precision Engineering, pp. 661-662.
- Rho, J. H., Lee, T. M., Jo, J. D., Lee, S. H. and Kim, D. S., 2010, "A Study of Design and Manufacture of Metal Jet System for Ultra Fine Solder Ball," The Korean Society of Mechanical Engineering, pp. 339-340.
- Lee, S. Y., Jang, J. H. and Park, J. H., 2010, " Self- Arrangement of Solder Balls by Using Droplet Microgripper and Solder Bump Creation Using the Same," The Korean Institute of Electrical Engineers, pp. 1299-1300.
- Abtew, M. and Selvaduray, G. 2000, "Lead-free Solders in Microelectronics," Materials Science and Engineering, Vol. 27, pp. 95-141. https://doi.org/10.1016/S0927-796X(00)00010-3
- Wang, C. and Holmes, A. S. 2001, "Laser-Assisted Bumping for Flip Chip Assembly," IEEE Transactions on Electronics Packaging Manufacturing, Vol. 24, No. 2, pp. 109-114. https://doi.org/10.1109/6104.930961
- Kim, K. S. and Kim, J. Y., 2004, "A Study on the Ball-off of Via Balls Bonded by Solder Paste," Journal of the Korean Institute of Electrical and Electronic Material Engineers, Vol. 17, No. 6, pp. 575-579. https://doi.org/10.4313/JKEM.2004.17.6.575
- Yamada, H., Sano, T., Nakayama, T. and Miyamoto, I., 2002, "Optimization of Laser-Induced Forward Transfer Process of Metal Thin Films," Applied surface Science, pp. 411-415.
- Tan, B., Venkatakrishnan, K. and Tok, K. G., 2003, "Selective Surface Texturing Using Femtosecond Pulsed Laser Induces Forward Transfer," Applied Surface Science, Vol. 207, pp. 365-371. https://doi.org/10.1016/S0169-4332(03)00006-0
- Esrom, H., Zhang, J. Y., Kogelschatz, U. and Pedraza, A. J., 1995, "New Approach of a Laser- Induced Forward Transfer for Deposition of Patterned Thin Metal Films," Applied Surface Science, Vol. 86, pp. 202-207. https://doi.org/10.1016/0169-4332(94)00385-8
- Kim, H. D., Yun, D. Y. and Hwang, J. W., 2007, "Optimal Design of PCSB from Thermal Stress Analysis," Korean Society of Machine Tool Engineers, pp. 673-676.
- David A. W. and Grosu, V., 2007, "The Effect of Melting-Induced Volumetric Expansion on Initiation of Laser-Induced Forward Transfer," Applied Surface Science, Vol. 253, pp. 4759-4763. https://doi.org/10.1016/j.apsusc.2006.10.046
- Yilbas, B. S., Shuja, S. Z. and Khan, S. M. A., 2010, "Laser Repetitive Pulse Heating of Tool Surface," Optics & Laser Technology, Vol. 43, pp. 754-761.
- Lee, J. H., Cho, Y. W., Chea, S. W. and Kim, Y. S., 2000, "Analysis of Temperature Distribution in Solder Bumps during Laser Fluxless Solder Bumping," Korean Institute of Metals and Materials, Vol. 38, No. 11, pp. 1528-1534.
- Yue, P., Feng, J. J., Liu, C. and Shen, J., 2004, "A Diffuse-Interface Method for Simulating Two-Phase Flows of Complex Fluids," Journal of Fluid Mechanics, Vol. 515, pp. 293-317. https://doi.org/10.1017/S0022112004000370
- Incopera, Dewitt, Bergman, Lavine, 2010, Fundamentals of Heat and Mass Transfer, WILEY, pp. 289-298.