DOI QR코드

DOI QR Code

Safety Evaluation of Fire Resistant Extruded Panel for Partition Wall System

  • Choi, Duck-Jin (Department of Architectural Engineering, Kongju National University) ;
  • Kim, Jin-Man (Department of Architectural Engineering, Kongju National University)
  • 투고 : 2012.06.13
  • 심사 : 2012.09.14
  • 발행 : 2012.12.20

초록

While the extruded cement panel has many advantages compared to drywall, it has limited applicability in buildings due to its low fire resistance. However, an extruded panel in which the fire resistance has been dramatically enhanced through the addition of a-hemihydrate gypsum is expected to become widely applied as a partition wall or interior material for buildings. To ensure its applicability, certain safety requirements for use, such as the leaning load by residents, the impact by indoor articles, and the fire, need to be taken into consideration. The purpose of this study is to review the impact load resistance, horizontal load resistance, and fire resistance as required safety properties for the partition wall and interior materials of the extruded panel that includes a-hemihydrate gypsum. The results of this study show that the impact load resistance of the extruded panel that includes a-hemihydrate gypsum achieves SD grade for industrial buildings, and the horizontal impact load resistance achieves HD grade for public buildings. In addition, it provides fire-resistance for approximately 7 minutes longer than the existing extruded cement panel. Based on this result, it is confirmed the extruded panel incorporating a-hemihydrate gypsum has adequate safety properties for use as partition wall or interior material.

키워드

참고문헌

  1. Lee HJ. A Study on the Required Performance of Interface to Joint of Infill and Infill in Apartment House [dissertation]. Seoul (Korea): University of Hanyang; 2009. p. 1-41.
  2. Kim JM, Kang SP, Choi DJ, Ra JM. Hydration Behavior and Fire-Resistance Property of Cement Mortars Mixed with Various Types of Gypsum. Journal of the Architectural Institute of Korea Planning & Design. 2010 December;26(12):128-13.
  3. Kim SW. An Experimental Study on the Sound Insulation Characteristics of Light Weight Wall. Journal of the Architectural Institute of Korea Planning & Design. 1998 November;14(11):297-304.
  4. Kim MJ. Evaluation on the Sound Insulation of Single Lightweight Panels by the Specimen Size. Journal of The Korean Society of Living Environmental System. 2008 March;15(1):76-84.
  5. Choi SK. Evaluation Method of Impact Resistance of the Materials Used for Framed Walls and Floors. Journal of the Architectural Institute of Korea Planning & Design. 2004 January;20(1):123-31.
  6. Lee SR. A Study on the Resistant performance of partition walls composed of gypsum boards against horizontal and impact loads [dissertation]. Seoul (Korea): University of Hanyang; 2002. p. 1-66.
  7. Gary R Consolazio, Michael C. McVay, Jeff W. RishIII. Measurement and prediction of pore pressures in saturated cement mortar subjected to radiant heating. The United States: ACI Materials Journal. 1998 October;5(95):525-36.
  8. KSA. KS F 2273 Methods of performance test for building construction panels. Seoul (Korea): KSA; 2009.
  9. KSA. KS F 2221 Test method of impact for building boards. Seoul (Korea): KSA; 2009.
  10. BS. BS5234 Part 2 Partitions(Including Matching Linings). The United Kingdom: BS; 1992
  11. KSA. KS F 2257-1 Methods of fire resistance test for elements of building construction-General requirements. Seoul (Korea): KSA; 2005.

피인용 문헌

  1. Load characteristics based on loading conditions of large soft body used for impact resistance testing of lightweight wall vol.123, 2016, https://doi.org/10.1016/j.conbuildmat.2016.06.118