참고문헌
- H. Wolfson and G. Elliott, "Electrically Conducting Cements Containing Epoxy Resins and Silver," U.S. Patent 2774747, 1956.
- D. Lu, Q.K. Tong, and C.P. Wong, "Conductivity Mechanisms of Isotropic Conductive Adhesives (ICAs)," IEEE Trans. Electron. Packag. Manuf., vol. 22, no. 3, 1999, pp. 223-227. https://doi.org/10.1109/6104.795857
- H. Jiang et al, "Ultra High Conductivity of Isotropic Conductive Adhesives," Electron. Compon. Technol. Conf., 2006, pp. 485-490.
- Y.-S. Eom et al., "Characterization of Polymer Matrix and Low Melting Point Solder for Anisotropic Conductive Film," Microelectron. Eng., vol. 85, no. 2, 2008, pp. 327-331. https://doi.org/10.1016/j.mee.2007.07.005
- Y.-S. Eom et al., "Electrical and Mechanical Characterization of an Anisotropic Conductive Adhesive with a Low Melting Point Solder," Microelectron. Eng., vol. 85, no. 11, 2008, pp. 2202-2206. https://doi.org/10.1016/j.mee.2008.05.038
- Y.-S. Eom et al., "Electrical Interconnection with a Smart ACA Composed of Fluxing Polymer and Solder Powder," ETRI J., vol. 32, no. 3, June 2010, pp. 414-421. https://doi.org/10.4218/etrij.10.0109.0400
- J.-W. Baek et al., "Chemo-rheological Characteristic of a Selfassembling Anisotropic Conductive Adhesive System Containing a Low-Melting Point Solder," Microelectron. Eng., vol. 87, no. 10, 2010, pp. 1968-1972 . https://doi.org/10.1016/j.mee.2009.12.020
- K.-S. Jang et al., "Catalytic Behavior of Sn/Bi Metal Powder in Anhydride-Based Epoxy Curing," J. Nanosci. Nanotechnol., vol. 9, no. 12, 2009, pp. 7461-7466.
- K.-S. Choi et al., "Novel Maskless Bumping for 3D Integration," ETRI J., vol. 32, no. 2, Apr. 2010, pp. 342-344. https://doi.org/10.4218/etrij.10.0209.0396
- W.F. Gale and T.C. Totemeier, Smithells Metals Reference Book, 8th ed., Butterworth-Heinemann, vol. 1, 2004, p. 11.
- H.-W. Miao and J.-G. Duh, "Microstructure Evolution in Sn-Bi and Sn-Bi-Cu Solder Joints under Thermal Aging," Materials Chemistry and Physics, vol. 71, no. 3, 2001, pp. 255-271. https://doi.org/10.1016/S0254-0584(01)00298-X
피인용 문헌
- Novel Bumping and Underfill Technologies for 3D IC Integration vol.34, pp.5, 2011, https://doi.org/10.4218/etrij.12.0112.0104
- Sintering Characteristics of Micro-Zn Paste Containing Sn-3.0Ag-0.5Cu Nanoparticles vol.249, pp.None, 2011, https://doi.org/10.4028/www.scientific.net/amm.249-250.939
- Optimization of Material and Process for Fine Pitch LVSoP Technology vol.35, pp.4, 2011, https://doi.org/10.4218/etrij.13.1912.0007
- Fine-Pitch Solder on Pad Process for Microbump Interconnection vol.35, pp.6, 2011, https://doi.org/10.4218/etrij.13.0213.0284
- Characterization of Fluxing and Hybrid Underfills with Micro-encapsulated Catalyst for Long Pot Life vol.36, pp.3, 2011, https://doi.org/10.4218/etrij.14.0113.0570
- Characterization and Estimation of Solder-on-Pad Process for Fine-Pitch Applications vol.4, pp.10, 2011, https://doi.org/10.1109/tcpmt.2014.2354049
- Reliability of a printed Cu busbar electrode on a conventional silicon solar cell vol.54, pp.8, 2011, https://doi.org/10.7567/jjap.54.08kd22
- Development of Copper Electro-Plating Technology on a Screen-Printed Conductive Pattern with Copper Paste vol.22, pp.1, 2015, https://doi.org/10.6117/kmeps.2015.22.1.051
- Interconnection Technology Based on InSn Solder for Flexible Display Applications vol.37, pp.2, 2011, https://doi.org/10.4218/etrij.15.0114.0167
- Novel Low-Volume Solder-on-Pad Process for Fine Pitch Cu Pillar Bump Interconnection vol.22, pp.2, 2011, https://doi.org/10.6117/kmeps.2015.22.2.055
- Sn58Bi Solder Interconnection for Low-Temperature Flex-on-Flex Bonding vol.38, pp.6, 2011, https://doi.org/10.4218/etrij.16.0115.0945
- Curing Kinetics and Chemorheological Behavior of No-flow Underfill for Sn/In/Bi Solder in Flexible Packaging Applications vol.38, pp.6, 2011, https://doi.org/10.4218/etrij.16.0116.0047
- Characterization of transmission lines with through-silicon-vias and bump joints on high-resistivity Si interposers for RF three-dimensional modules vol.55, pp.6, 2016, https://doi.org/10.7567/jjap.55.06jc01
- Ag 도금 Cu 입자의 제조에서 암모늄 기반 혼합 용매를 사용한 Cu 입자의 전처리 조건과 이의 영향 vol.26, pp.3, 2011, https://doi.org/10.3740/mrsk.2016.26.3.109
- RF characteristics of flexible circuits patterned with hybrid Ag paste vol.29, pp.6, 2011, https://doi.org/10.1007/s10854-017-8470-5
- Liquid-Phase Reaction Sintering Behavior at below 200 °C and Electrical Sheet Resistance of Sn-58Bi/Cu Composite Pastes vol.56, pp.6, 2018, https://doi.org/10.3365/kjmm.2018.56.6.440
- Effect of Tetraethylenepentamine on Silver Conductive Adhesive vol.70, pp.9, 2011, https://doi.org/10.1007/s11837-018-2939-4
- Electrical Property Improvement of Copper Filler Conductive Adhesive with Low-Melting Point Metal Bridge vol.60, pp.9, 2011, https://doi.org/10.2320/matertrans.mh201810
- Synthesis of submicrometre Cu particles via a reduction in triethanolamine solvent vol.14, pp.4, 2019, https://doi.org/10.1049/mnl.2018.5606
- Conductive adhesive with transient liquid-phase sintering technology for high-power device applications vol.41, pp.6, 2011, https://doi.org/10.4218/etrij.2018-0250
- Self-Powered Autonomous Wireless Sensor Node by Using Silicon-Based 3D Thermoelectric Energy Generator for Environmental Monitoring Application vol.13, pp.3, 2020, https://doi.org/10.3390/en13030674