Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

The Effect of Ball-milling Energy on Combustion Synthesis Coating of Cu-Al-Ni Based Intermetallics

Cu-Al-Ni계 금속간화합물의 연소합성 Coating에 미치는 Ball Mill처리의 영향

  • Lee, Han-Young (Dept. of Advanced Materials Engineering, Keimyung university)
  • Received : 2010.10.02
  • Accepted : 2010.12.04
  • Published : 2011.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The possibility of Cu-Al-Ni intermetallic coating on the mild steel through the combustion synthesis has been investigated. In particular, the effect of the ball milling energy on the microstructure of the coating layer was examined to obtain the best coating condition. Experimental results show that Cu-Al-Ni powder compact was explosively synthesized and successfully coated with the steel matrix. It was revealed that the formation of $Cu_9Al_4$ intermetallic decreased with increase in the ball milling energy. This result supports that the high energy ball milling would be effective for obtaining the most suitable microstructure for Cu-Al-Ni coating layer. However, the excessive ball milling energy seems to decrease the bonding strength between the coating layer and the matrix.

Keywords

References

  1. N.Suresh and U.Ramamurty, "Aging Response and its Effect on the Functional Properties of Cu-Al-Ni Shape Memory Alloys," J. Alloys and Compounds, Vol. 449, pp. 113-118, 2008. https://doi.org/10.1016/j.jallcom.2006.02.094
  2. S.Stanciu and L.G.Bujoreanu, "Formation of ${beta}1'$ stress-induced martensite in the presence of r-phase in a Cu-Al-Ni-Mn-Fe Shape memory alloy," Materials Science and Engineering A., Vol. 481-482, pp. 494-499, 2008. https://doi.org/10.1016/j.msea.2007.01.174
  3. R.Kainuma, X.J.Liu,I.Ohnuma, S.M.Hao, and K.Ishida, "Miscibility Gap of B2 Phase NiAl to Cu3Al Section of Cu-Al-Ni System," Intermetrallics, Vol. 13, pp. 655-661, 2005. https://doi.org/10.1016/j.intermet.2004.10.005
  4. S. M. Chentouf, M. Bouabdallah, J-C. Gachon, E. Patoor, and A. Sari, "Microstucture and Thermodynamic Study of Hypoeutectoida Cu-Al-Ni Shape Memory Alloys," J. of Alloys and compounds, Vol. 470, pp. 507-514, 2009. https://doi.org/10.1016/j.jallcom.2008.03.009
  5. Z. Xiao, Z. Li, M. Fang, S. Xiong, X. Sheng, and M. Zhou, "Effect of Processing of Mechanical Alloying and Powder Metallurgy on Microstructure and Properties of Cu-Al-Ni-Mn Alloy," Materials Science and Engineering A. Vol. 488, No. 1-2, pp. 266-272, 2008. https://doi.org/10.1016/j.msea.2007.11.037
  6. V.Recarte, J.I.Perez-Landazabai, A.Ibarra, M.L.No, and J San Juan, "High temperature ${\beta}$ phase decomposition process in a Cu-Al-Ni shape memory alloy," Materials Science and Engineering A., Vol. 378, pp. 238-242, 2004. https://doi.org/10.1016/j.msea.2003.09.111
  7. J.I.Perez-Landazabai, V.Recarte, J.Campo, M.L.No, and J San Juan, "Neutron Diffraction Analysis of the ${\beta}$ Phase Decomposition Process in a Texture Free Cu-Al-Ni Shape Memory Alloy," Physica B, Vol. 350, pp. 1007-1009, 2004. https://doi.org/10.1016/j.physb.2004.03.277
  8. J.I.Perez-Landazabai, V.Recarte, M.L.No, and J San Juan, "Determination of the Order in r1 Intermetallic Phase in Cu-Al-Ni Shape Memory Alloy," Intermetallics, Vol. 11, pp. 927-930, 2003. https://doi.org/10.1016/S0966-9795(03)00121-3
  9. H-Y. Lee, J.-K. Roe, and A.Ikenaga, "Sliding Wear Properties for Ni-Al based Intermetallic Compound Layer Coated on Ductile Cast Iron by Combustion Synthesis," Wear, Vol. 260, pp. 83-89, 2006. https://doi.org/10.1016/j.wear.2004.12.033
  10. H-Y Lee, A. Ikenaga, S-H Kim, and K-B Kim, "The Effects of Induction Heating Rate on Properties of Ni-Al based Intermetallic Compound Layer Coated on Ductile Cast Iron by Combustion Synthesis," Intermetallics, Vol. 15, pp. 1050-1056, 2007. https://doi.org/10.1016/j.intermet.2006.12.007
  11. 이한영, 김태준, 조용재, "Ni-Al계 금속간화합물 코팅에 미치는 고주파유도 가열 조건의 영향," 대한금속재료학회지, 제48권, 제2호, pp. 141-147, 2010.
  12. M.M. Moshksar and M.Mirzaee, "Formation of NiAl Intermetallic by Gradual and Explosive Expthermic Reaction Mechanism During Ball Milling," Vol. 12, pp. 1361-1366, 2004. https://doi.org/10.1016/j.intermet.2004.03.018
  13. ASM, ASM Handbook(Volume 3), pp. 2-24, 1992.

Cited by

  1. 고주파 유도가열을 통한 알루미늄 기판재위 Ni-Al계 금속간화합물의 연소합성코팅에 관한 연구 vol.28, pp.2, 2011, https://doi.org/10.9725/kstle.2012.28.2.056