참고문헌
- Anderson, MT., Rudland, D., Zhang, T. and Wilkowski, GM., 2008, "Final Report-Inspection Limit Confirmation for Upper Head Penetration Nozzle Cracking," U.S. Depatrment of Energy, pp. 1-22.
- Rudland, D., Chen, Y., Zhang, T., Wilkowski, G., Broussard, J. and White, G., 2007, "Comparison of Welding Residual Stress Solutions for Control Rod Drive Mechanism Nozzles," KSME PVP2007-26045, pp. 1-15.
- Cheng, W., Rudland, D., Wilkowski, G. and Norris, W., 2005, "Effects of Weld Geometry on Residual Stress and Crack Driving Force for Centerhole Control Rod Drive Mechanism Nozzles - Part I Weld Residual Stress," ASME PVP2005-71077, pp. 1-6.
- Combustion Engineering, INC., 1981, Analytical Report for Korea Nuclear Unit No. 5 Reactor Vessel, CENC-1466, pp. 1403-1488.
- Kim, J. S., Jin, T. Dong, E. and Prager, P., 2003, "Development of Residual Stress Analysis Procedure for Fitness-For-Service Assessment of Welded Structure," Trans. of the KSME-A, Vol. 27, pp. 713-723. https://doi.org/10.3795/KSME-A.2003.27.5.713
- ABAQUS, 2003, ABAQUS Stndard/User's Manual, version 6.9, Hibbit Karlsson & Sorensen, Inc.
- Song, T. K., Bae, H. Y,. Kim, Y. J., Lee, K. S. and Park, C. Y., 2008, "Sensitivity Analyses of Finite Element Method for Estimating Residual Stress of Dissimilar Metal Multi-Pass Weldment in Nuclear Power Plant," Trans. Of the KSME-A, Vol. 32, pp. 770-781. https://doi.org/10.3795/KSME-A.2008.32.9.770
- Lee, S. G., Kim, J. S. and Jin, T. E., 2004, "A Study for Mitigating Residual Stress in CRDM Penetration Nozzle Weld," KSME- Spring conference, pp. 90-95.
- Song, T. K., Chun, Y. B., Oh, C. Y., Bae, H. Y., Kim, Y. J., Lee, S. H., Lee, K. S. and Park, C. Y., 2009 "Effects of Similar Metal Weld on Residual Stress in Dissimilar Metal Weld According to Safe End Length," Trans. Of the KSME-A, Vol. 33, pp. 664-672. https://doi.org/10.3795/KSME-A.2009.33.7.664
- Yaghi, A., Gyde, H., Becker, A., Sun, W. and Williams, J. A., 2006, "Residual Stress Simulation in Thin and Thick-walled Stainless Steel Pipe Welds Including Pipe Diameter Effects," Int. J. of Pressure Vessels and Piping, Vol. 83, pp. 864-874. https://doi.org/10.1016/j.ijpvp.2006.08.014
- Ogawa, K., Deng, D., Kiyoshima, S., Yanagida, N. and Saito, K., 2009, "Influences of Heat Source Model on Welding Residual Stress and Distortion in a Multi-Pass J-Groove Joint," J. of Computation Materials Science, Vol. 46, pp. 987-995. https://doi.org/10.1016/j.commatsci.2009.05.002
- Brickstad, B., Josefson, B., 1998, "A Parametric Study of Residual Stresses in Multi-Pass Butt-Welded Stainless Steel Pipes," Int. J. of Pressure Vessels and Piping, Vol. 75, pp. 11-25. https://doi.org/10.1016/S0308-0161(97)00117-8
- Kiyoshima, S., Deng, D., Ogawa, K., Yanagida, N. and Saito, K., 2009, "Investigations on Welding Residual Stresses in Penetration Nozzles by Means of 3D Thermal Elastic Plastic FEM and Experiment," J. of Computation Materials Science, Vol. 45, pp. 1031-1042. https://doi.org/10.1016/j.commatsci.2009.01.008
- Special metals, 2008, Inconel alloy 600, Special Metals Corporation Publication, No. SMC-207, September.
- ASME B&PV Committee, 2007, ASME B&PV Code Sec. III, Appendices.
- ASME B&PV Committee, 2008, ASME B&PV Code Sec. II, PART A, B, C.
- ASME Code Case N-729-1, 2006, Alternate Examination Requirements for PWR Reactor Vessel Upper Heads With Nozzles Having Pressure-Retaining Partial-Penetration Welds.
- Korea Electric Power Research Institute (KEPRI), 2007, Development of Material Degradatin Evaluation System for Major Nuclear Components, pp, 157-173.
피인용 문헌
- Effect of Normal Operating Condition Analysis Method for Weld Residual Stress of CRDM Nozzle in Reactor Pressure Vessel vol.37, pp.9, 2013, https://doi.org/10.3795/KSME-A.2013.37.9.1159
- Effects of Repair Weld of Reactor Pressure Vessel Upper Head Control Rod Drive Mechanism Penetration Nozzle on J-Groove Weldment Using Finite Element Analysis vol.38, pp.6, 2014, https://doi.org/10.3795/KSME-A.2014.38.6.637
- Evaluation of J-groove weld residual stress and crack growth rate of PWSCC in reactor pressure vessel closure head vol.29, pp.3, 2015, https://doi.org/10.1007/s12206-015-0236-5
- PWSCC initiation and propagation in a CRDM penetration nozzle vol.31, pp.11, 2017, https://doi.org/10.1007/s12206-017-1033-0
- Sensitivity Analysis of Finite Element Parameters for Estimating Residual Stress of J-Groove Weld in RPV CRDM Penetration Nozzle vol.36, pp.10, 2012, https://doi.org/10.3795/KSME-A.2012.36.10.1115