References
- F. Vaz, J. Ferreira, E. Riberio, L. Rebouta, S. Lanceros-Mendez, J. A. Mendes, E. Alves, Ph. Goudeau, et. Al., "Influence of Nitrogen Content on the Structural, Mechanical and Electrical Properties of TiN Thin Films," Surf. Coat. Tech., 191 [2] 317-23 (2005). https://doi.org/10.1016/j.surfcoat.2004.01.033
- A. Kagiyama, K. Terakadoa, and R. Uraob, "Effect of Nitriding and TiN Coating Temperatures on the Corrosion Resistance of the Combined Surface Modification Layer," Surf. Coat. Tech., 169-170 [6] 397-400 (2003). https://doi.org/10.1016/S0257-8972(03)00134-8
- J. W. Uhm and H. T. Joen, "TiN Diffusion Barrier Grown by Atomic Layer Deposition Method for Cu Metallization," Jpn. J. Appl. Phys., 40 [7] 4657-60 (2001). https://doi.org/10.1143/JJAP.40.4657
- W. D. Sproul, J. E. Greene, and J. A. Thornton (Eds), "Physics and Chemistry of Protective Coatings", pp. 50-57, American Institute of Physics, 1986.
- N. Y. Kim, Y. B. Son, J. H. Oh, C. K. Hwangbo, and M. C. Park, "TiNx Layer as an Antireflection and Antistatic Coating for Display," Surf. Coat. Tech., 128-129 [6] 156-60 (2000). https://doi.org/10.1016/S0257-8972(00)00574-0
- Y. S. Kim, H. Jone, and Y. D. Kim, "Atomic Layer Chemical Vapor Deposition of TiN Thin Films on Si(100) and Si(111)," J. Kor. Phys. Soc., 37 [6] 1045-50 (2000). https://doi.org/10.3938/jkps.37.1045
- C. Rebholz, A. Leyland, P. Larour, C. Charitidis, S. Logothetidis, and A. Matthews, "The Effect of Boron Additions on the Tribological Behavior of TiN Coating Produced by Electron Beam Evaporative PVD," Surf. Coat. Tech., 116-119 [9] 648-53 (1999). https://doi.org/10.1016/S0257-8972(99)00260-1
- M. Katayama, "TFT-LCD Technology," Thin Solid Films, 341 [1] 140-47 (1999). https://doi.org/10.1016/S0040-6090(98)01519-3
- J. Sellers, "Asymmetric Bipolar Pulsed DC : The Enabling Technology for Reactive PVD," Surf. Coat. Tech., 98 [1] 1245-50 (1998). https://doi.org/10.1016/S0257-8972(97)00403-9
- H. D. Ko, C.S. Lee, W. P. Tai, S. J. She, and Y. S. Kim, "Effect of Pulse Frequency on the Properties of ZnO : Al Thin Films Prepared by Pulsed DC Magnetron Sputtering," J. Kor. Ceram. Soc., 41 [6] 476-80 (2004). https://doi.org/10.4191/KCERS.2004.41.6.476
- J. H. Kim, J. K. Lee, and J. H. Ahn, "Growing Behavior of AlN Thin Film Deposited by Asymmetric Bipolar Pulsed DC Reactive Sputtering," J. Kor. Ceram. Soc., 38 [1] 61-67 (2001).
- W. D. Sproul, "High-rate Reactive DC Magnetron Sputtering of Oxide and Nitride Super Lattice Coatings," J. Vac. Sci. Tech., 51 [4] 641-46 (1998).
- J. W. Lee, S. K. Tien, Y. C. Kuo, "The Effects of Substrate Bias, Substrate Temperature and Pulse Frequency on the Microstructure of Chromium Nitride Coating Deposited by Pulsed Direct Current Reactive Magnetron Sputtering," J. Elec. Mater., 34 [12] 1484-92 (2005). https://doi.org/10.1007/s11664-005-0155-9
- B. D. Cullity and S. R. Stock, "Element of X-Ray Diffraction", 3rd. ED., pp. 167-71 Prentice-Hall Inc., 2001.
- I. Petrov, P. B. Barna, L. Hultman, and J. E. Greene, "Microstructural Evolution During Film Growth," J. Vac. Sci. Tech. A, 21 [5] 774-56 (2003).
- S. Y. Chun "Microstructure and Mechanical Properties of Nanocrystalline TiN films Through Increasing Substrate Bias," J. Kor. Ceram. Soc., 47 [6] 479-84 (2010). https://doi.org/10.4191/KCERS.2010.47.6.479
- N. Maazi and N. Rouag, "Consideration of Zener Drag Effect by Introducing a Limiting Radius for Neighbourhood in Grain Growth Simulation," J. Cryst. Growth, 243 [2] 361-69 (2002). https://doi.org/10.1016/S0022-0248(02)01420-3
- I. Petrov, L. Hultman, U. Helmersson, S. A. Barnett, J. E. Sundgern, and J. E. Green, "Microstructure Modification of TiN by Ion Bombardment during Reactive Sputtering Deposition," Thin Solid Films, 169 [2] 299-314 (1989). https://doi.org/10.1016/0040-6090(89)90713-X
- Harish, C. Barshilia, and K. S. Rajam, "Reactive Sputtering of Hard Nitride Coatings Using Asymmetric Bipolar Pulsed DC Generator," Surf. Coat. Tech., 201 [3] 1827-35 (2006). https://doi.org/10.1016/j.surfcoat.2006.03.012
Cited by
- A Comparative Study of CrN Coatings Deposited by DC and Pulsed DC Asymmetric Bipolar Sputtering for a Polymer Electrolyte Membrane Fuel Cell (PEMFC) Metallic Bipolar Plate vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.390
- A Comparative Study of Nanocrystalline TiAlN Coatings Fabricated by Direct Current and Inductively Coupled Plasma Assisted Magnetron Sputtering vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.375
- Effects of Duty Cycle and Pulse Frequency on the Microstructure and Mechanical Properties of TiAlN Coatings vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.447
- Properties of VN Coatings Deposited by ICP Assisted Sputtering: Effect of ICP Power vol.54, pp.1, 2017, https://doi.org/10.4191/kcers.2017.54.1.05
- 유도결합 플라즈마 파워변화에 따른 초경도 나노결정질 TiN 코팅막의 물성변화 vol.50, pp.3, 2011, https://doi.org/10.4191/kcers.2013.50.3.212
- 에너지 반환회로를 갖는 비대칭 펄스형 DC 플라즈마 전원장치에 관한 연구 vol.18, pp.6, 2013, https://doi.org/10.6113/tkpe.2013.18.6.593
- Grain Size and Phase Transformation Behavior of TiNi Shape-Memory-Alloy Thin Film under Different Deposition Conditions vol.13, pp.14, 2020, https://doi.org/10.3390/ma13143229
- Characteristics of HfN coatings by inductively coupled plasma-assisted magnetron sputtering vol.58, pp.2, 2011, https://doi.org/10.1007/s43207-020-00084-3