Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaporation Characteristics of Materials from an Electron Beam Evaporation Source

전자빔 증발원을 이용한 물질의 증발 특성

  • Jeong, J.I. (Hybrid Materials Research Department, Research Institute of Industrial Science & Technology) ;
  • Yang, J.H. (Hybrid Materials Research Department, Research Institute of Industrial Science & Technology) ;
  • Park, H.S. (Hybrid Materials Research Department, Research Institute of Industrial Science & Technology) ;
  • Jung, J.H. (Hybrid Materials Research Department, Research Institute of Industrial Science & Technology) ;
  • Song, M.A. (Hybrid Materials Research Department, Research Institute of Industrial Science & Technology)
  • 정재인 (포항산업과학연구원 융합소재연구본부) ;
  • 양지훈 (포항산업과학연구원 융합소재연구본부) ;
  • 박혜선 (포항산업과학연구원 융합소재연구본부) ;
  • 정재훈 (포항산업과학연구원 융합소재연구본부) ;
  • 송민아 (포항산업과학연구원 융합소재연구본부)
  • Received : 2011.07.13
  • Accepted : 2011.08.30
  • Published : 2011.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Electron beam evaporation source is widely used to prepare thin films by physical vapor deposition because it is very effective to vaporize materials and there is virtually no limit to vaporize materials including metals and compounds such as oxide. In this study, evaporation characteristics of various metals and compounds from an electron beam evaporation source have been studied. The 180 degree deflection type electron beam evaporation source which has 6-hearth crucibles and is capable of inputting power up to 10 kW was employed for evaporation experiment. 36 materials including metals, oxides and fluorides have been tested and described in terms of optimum crucible liner, evaporation state, stability, and so on. Various crucible liners have been tried to find out the most effective way to vaporize materials. Two types of crucible liners have been employed in this experiment. One is contact type liner, and the other is non-contact type one. It has been tried to give the objective information and the most effective evaporation method on the evaporation of materials from the electron beam evaporation source. It is concluded that the electron beam evaporation source can be used to prepare good quality films by choosing the appropriate crucible liner.

Keywords

References

  1. Vacuum Evaporation Sources, Catalogue by R. D. Mattis Company, Long Beach, California, U.S.A. (1989).
  2. Vacuum Evaporation Sources, Catalogue by Jori Resources Corp., Ventura, California, U.S.A. (1989).
  3. Evaporation Sources, Catalogue by Vac's Metal Corp., Tokyo, Japan (1989).
  4. Graphite Applications, Catalogue by Toyo Tanso, Osaka, Japan (1990).
  5. http://www.plansee.com/english/index.html.
  6. http://www.lesker.com/newweb/FrameSets/Frameset_Evaporation_Sources.cfm.
  7. "Evaporation Sources and Crucibles", Catalogue by PLANSEE Corp., 715 DE.01.01 (3000) RWF.
  8. P. M. Martin, Handbook of Deposition Technologies for Films and Coatings (Elsevier Inc., 2005), Chap. 4.
  9. R. F. Bunshah, Handbook of Deposition Technologies for Films and Coatings, 2nd Ed., (Noyes Publications, 1994), Chap. 4.
  10. E. B. Graper, J. Vac. Sci. Technol. 8 (1971) 333.
  11. E. B. Graper, J. Vac. Sci. Technol. A 5(4) (1987) 2718. https://doi.org/10.1116/1.574727
  12. 정재인, 임병문, 문종호, 홍재화, 강정수, 이영백, 한국표면공학회지 24(1) (1991) 25.
  13. J. I. Jeong, B. M. Lim, J. H. Moon, J. H. Hong, J. S. Kang, Y. P. Lee, J. Vac. Sci. Technol. A 12(3) (1994) 873. https://doi.org/10.1116/1.579269
  14. 정재인, 양지훈, 한국표면공학회지 42(1) (2009) 1.
  15. http://www.jeol.co.jp/products/product/jebg_ebg_bs_jst/index.htm

Cited by

  1. Effect of the Coating Structure on the Corrosion Resistance of Al-Mg Coated Steel vol.49, pp.5, 2016, https://doi.org/10.5695/JKISE.2016.49.5.454
  2. Effect of Heat Treatment on the Corrosion Resistance of the Al-Mg Coated Steel Sheet vol.47, pp.4, 2014, https://doi.org/10.5695/JKISE.2014.47.4.186