Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Heat Transfer Characteristics with Changing Distances between Burner and Heat Exchanger

버너와 열교환기 간격 변화에 대한 열전달 특성

  • Received : 2011.06.21
  • Accepted : 2011.07.11
  • Published : 2011.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the heat transfer characteristics and NOx and CO emissions of a heat exchanger were investigated using a premixed burner. The experiments involved changing the distance between the burner and heat exchanger to 30, 40, and 50 mm with various equivalence ratios. The results showed that the NOx and CO emissions increased as the equivalence ratio was increased because the flame temperature increased, regardless of the distance between the burner and heat exchanger. In particular, the CO emission increased significantly as the distance between the burner and heat exchanger was decreased. The optimal equivalence ratio for the A-type heat exchanger (distance between the burner and heat exchanger: 30 cm) was 0.7 in the experimental range. In this case, the CO and NOx emissions were 94.5 ppm and 11.2 ppm, respectively, and the efficiency was 84.1%.

본 연구는 비예혼합화염보다 화염길이가 짧고 당량비 조절을 통해 NOx 및 CO 배출량을 제어할 수 있는 예혼합방식의 버너를 설치하고, 버너와 열교환기 사이의 거리가 각각 30, 40, 50mm인 3종의 열교환기에 대해 당량비를 변화시킬 때 NOx 및 CO의 배출특성을 비교하고 열교환기의 열전달특성을 검토한 것이다. 실험결과 버너와 열교환기의 거리변화와 관계없이 당량비가 증가할수록 화염온도가 높아져 NOx 및 CO 배출량도 증가한다. 또한 CO 배출량은 버너와 열교환기 사이의 거리가 가까울수록 높게 나타난다. 본 실험범위에서 A type 열교환기(버너와 열교환기 사이 거리 30 cm)를 당량비 0.75(CO 94.5ppm, NOx 11.2ppm, 효율 84.1%)에서 운전하는 것이 최적조건으로 나타났다.

Keywords

References

  1. Peng, B., Wang, Q. W., Zhang, C., Xie, G. N., Luo, L. Q., Chen, Q. Y. and Zeng, M., 2007, "An Experimental Study of Shell-and Tube Heat Exchangers with Continuous Helical Baffles," Journal of Heat Transfer, Vol. 129, pp.1425-1431. https://doi.org/10.1115/1.2754878
  2. Moh, J. H, 2010, "Convective Heat Transfer Correlations for the Compact Heat Exchanger with Circular Tubes and Flat Tubes-Plate Fins," Trans. of the KSME(B), Vol. 34, No. 3, pp. 291-299. https://doi.org/10.3795/KSME-B.2010.34.3.291
  3. Eiamsa-ard, S., Thianpong, C., Eiamsa-ard, P. and Promvonge, P., 2010, "Thermal Characteristics in a Heat Exchanger Tube Fitted with Dual Twisted Tape Elements in Tandem," Int. Communications in Heat and Mass Transfer, Vol. 37, pp. 39-46. https://doi.org/10.1016/j.icheatmasstransfer.2009.08.010
  4. Yoo, S. Y., Jang, K. I. and Kwon, H. K., 2007, "An Experimental Study on Heat Transfer Enhancement of Cross Flow Heat Exchanger Using Screen," Proceedings of the SAREK Winter Annual Conference, pp. 185-190.
  5. Hwang, S. W. and Jeong, J. H., 2009, "Flow Analysis of Heat Exchanger with Delta Winglet Vortex Generators on CFD," Proceedings of the SAREK Summer Annual Conference, pp. 1166-1171.
  6. Yoo, S. Y., Kim, J. H., Chung, M. H. and Jie, M. S., 2008, "A Study on the Performance Prediction of Paper Heat Exchanger for Exhaust Heat Recovery," The Magazine of the SAREK, Vol. 20, No. 6, pp. 372-380.
  7. Choi, Y. K., Yoo, S. Y., Yun, H. I. and Kang, H. C., 2010, "A Study On Heat Transfer Enhancement in Counter-flow Hexagon Plastic Heat Exchanger," Proceedings of the SAREK Summer Annual Conference, pp. 1265-1270.
  8. Lee, H. S., Jeon, D. S., Kim, Y. L. and Kim, S. C., 2010, "Experimental Study of Evaporative Heat Transfer Characteristics of R-134a with Channel-Bending Angle in Microchannel Heat Exchangers," Trans. of the KSME(B), Vol. 34, No. 6, pp. 635-642. https://doi.org/10.3795/KSME-B.2010.34.6.635
  9. Kang, S. K., Choi, K. S. and Yoon, J. Y., 2009, "Characteristics of Combustion and Heat Transfer of Domestic Gas Boiler Equipped with 2-stage Heat Exchanger," Proceedings of the KSME Spring Annual Meeting, pp. 386-389.
  10. Park, J, K., Lee, S. K., Jeong, Y. S., Kum, S. M. and Lee, C. E., 2000, "The Study on the Optimization of Burner and Heat Exchanger for Condensing Gas Boiler," Proceedings of the Energy Engineering Spring Annual Conference, pp. 201-207.
  11. Kim, J. M., Lee, J., Lee, S., Lee, C. E. and Kum S. M., 2010, "Characteristics of Thermal Efficiency with Changing Distance Between Tubes for Heat Exchanger," Journal of Energy Engineering, Vol. 19, pp.177-181.