Abstract
In this paper, we expect that the IEEE 802.15.4a, which is based on CSS, will be used a lot without getting help from other systems or sensors and will make it possible to measure the distance between radio chips in sensor network field, where the location information of the standard have to be based upon. But, the error rate will be high, so we will correct the location of the tag, which will be received by anchor. The technology of location correction we offer is reducing the error rate through calculating the distance from Compensation Tag, and after that, unite the Toa method with the Fingerprint method and adapt them to location correction technology, calculate the location's estimate, and finally abstract the best suited location estimate for Compensation Tag. At last, we offer developing systems as indoor systems of CSS, which pursue the location between nodes, and a thesis about indoor systems and making their accuracy higher.
유비쿼터스 환경에서 위치추적 서비스를 구현하기 위해서는 위치 정보 및 이를 기반으로 한 주변의 상황에 대한 정보와 최적화된 위치 서비스 제공이 필요하다. 본 논문에서 제안하는 위치보정 기법은 실제 위치하는 측정태그와 보정태그와의 거리계산을 통하여 최적의 위치 값을 추출해내는 기법으로써 우선적으로 앤커에 수신된 태그의 위치 값 계산을 한 후 보정태그와의 거리 오차 계산을 통하여 위치 값을 보정한다. 본 논문에서는 CSS기반의 RF칩을 이용하여 실내에서 각 노드 간의 위치를 측정하는 시스템을 개발하고, 이에 대한 정밀도를 높이는 알고리즘을 제안하고자 한다.