DOI QR코드

DOI QR Code

Evaluation of Pumping Characteristics of High Strength Concrete using Continuous Pumping System

  • Received : 2011.04.18
  • Accepted : 2011.06.19
  • Published : 2011.08.20

Abstract

In the construction of tall-building, concrete pumping influences the success of the project. In order to establish pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So in this study, the characteristics including the inner pipe pressure, rheological properties of concrete and mortar through the continuous pumping test were evaluated. Then we analyzed the relations between rheological properties and pumpability. In the result of test, there are high correlations between the rheological characteristics which represented by yield stress and plastic viscosity and pressure loss with pipe length. Also, we estimated pressure loss according to conditions of concrete mix and pumping through the evaluation of inner pipe friction.

Keywords

References

  1. Ji SW, Seo CH. Development of concrete pumping technology in high-rise buildings. Journal of the Architectural Institute of Korea. 2006 Apr;50(4):66-71.
  2. AIJ. [Comprehensive evaluation of concrete pumpability-The 6th Association for research on pumping technology]. Tokyo (JP): Architectural Institute of Japan Pub; 2009. 99 p. Japanese.
  3. JSCE. [Concrete pump construction guide]. Tokyo (JP): Japan Society of Civil Engineers Pub; 2002. 229 p. Japanese.
  4. Stefan Jacobsen, Lars Haugan. Flow condition of fresh mortar and concrete in different pipes. Journal of the Cement and Concrete Research. 2009 Nov;39(11):997-1006. https://doi.org/10.1016/j.cemconres.2009.07.005
  5. AIJ. [Method and construction guidelines for concrete pump]. Tokyo (JP): Architectural Institute of Japan Pub; 1994. 182 p. Japanese.
  6. Tattersall GH, Banfill PFG. The rheology of fresh concrete. Boston (MA): Pitman Advanced Pub. Program; 1983. 351 p.
  7. Tattersall. G.H. The workability of concrete. Slough (UK): Cement and Concrete Association; 1976. 138 p.
  8. Chiara F, Ferraris. Measurement of the rheological properties of high performance concrete. Research of the National Institute of Standard and Technology. 1999 Sep-Oct;104(5) :461-78. https://doi.org/10.6028/jres.104.028
  9. Tsong Yen, Kuang-Hong Chen. Flow behaviour of high strength high-performance concrete. Journal of the Cement and Concrete Composites. 1999 Dec;21(5-6):413-24. https://doi.org/10.1016/S0958-9465(99)00026-8
  10. Chidiac S.E, Mahmoodzadeh F. Plastic viscosity of fresh concrete - A critical review of predictions methods. Journal of the Cement and Concrete Composites. 2009 Sep;31(8):535-44. https://doi.org/10.1016/j.cemconcomp.2009.02.004
  11. Chiara F, Ferraris, Nicos S. Martys. Relating fresh concrete viscosity measrement from different rheometer. Research of the National Institute of Standards and Technology. 2003 May-Jun;108(3):229-34. https://doi.org/10.6028/jres.108.021
  12. Kim KM, Yoo JK. Properties of water content variances in ultra high flowing concrete before and after the pumping operation. Journal of the Korea Concrete Institute. 2006 Feb;18(2):401-4.
  13. Seo I, Lee HS, Park HG, Kim WJ. An experimental study on correlation between rheological parameter of picked mortar and fluidity of concrete from 30 to 150 MPa. Journal of the Architectural Institute of Korea. 2009 Oct;25(9):93-100.
  14. Ko JH, Moon HJ, Seok WK Park SJ. A study on the 1:1 full scale core wall mock-up test of high strength concrete performed by testing pumpability. Journal of the Architectural Institute of Korea. 2008 Aug;24(8):203-10.

Cited by

  1. Predicting Pumpability and Shootability of Crushed Aggregate Wet-Mix Shotcrete Based on Rheological Properties vol.2016, 2016, https://doi.org/10.1155/2016/9838213
  2. Rheological characteristics of wet-mix shotcrete mixtures with crushed aggregates and mineral admixtures 2018, https://doi.org/10.1007/s12205-017-0198-5