DOI QR코드

DOI QR Code

Finite Element Analysis for Bending Behavior of Composite Beam with Perfobond FRP Used as a Permanent Formwork

퍼포본드 FRP를 영구거푸집으로 활용한 합성보의 휨거동에 관한 유한요소해석 연구

  • Received : 2011.02.07
  • Accepted : 2011.07.07
  • Published : 2011.07.31

Abstract

In recent years, many efforts have steadily been allocated to develop a new deck system in terms of its materials and structures in order to make up for the shortcomings of reinforced concrete deck. This study implemented and analyzed the verification for concrete composite beam with perfobond FRP as a permanent formwork and the tensile reinforcement, using non-linear finite element analysis program. Approximately 8-15% difference of ultimate failure load between numerical and experimental results were found and showed a similar figure of strain distribution in failure state.

최근 철근 콘크리트 바닥판의 단점을 원천적으로 보완할 목적으로 재료적 측면과 구조적 측면에서 새로운 바닥판 시스템을 개발하려는 노력이 계속 되어 왔다. 본 연구에서는 퍼포본드 FRP를 영구거푸집 및 인장 보강재로 이용한 콘크리트 합성보에 대해 비선형 유한요소해석 프로그램을 활용하여 검증해석을 실시하고 이를 분석하였다. 실험결과와 비교해서 극한파괴하중의 경우 약 8-15% 내외의 차이를 보여 주었으며, 파괴 시 변형도 분포형태는 실험과 유사한 경향을 보여주었다.

Keywords

References

  1. The Ministry of Construction and Transportation , "Bridge Status Reference in Korea", 2005.
  2. Yoo, S.W., "A Proposal of Simplified Bond Stress-Slip Model between FRP Plank and Ca st-In-Place Concrete", Journal of Korea institute for Structural Maintenance Inspection, Vol.12 No.1, pp.65-72, 2008.
  3. Yoo, S.W. and Kook, M.S., "An Experimental Study of Perfobond FRP-Concrete Composite Beam", Journal of Korea institute for Structural Maintenance Inspection, Vol.14 No.2, pp.121-127, 2010.
  4. Yoo, S.W. and Bae, H.U., "Bond Slip Behavior Cast-In-Place Concrete and FRP Plank Used as Permanent Formwork and Tensile Reinforcement ", Journal of the Korean Society of Civil Engineers, Vol.27 No.1, pp.69-77, 2007.
  5. Yoo, S.W., Bae, H.U., Oliva, M.G. and Bank, L.C., "Experimental Study of Concrete Beam with FRP Plank as Formwork and Reinforcement", Journal of Korea Concrete Institute, Vol.19 No.1, pp.67-74, 2007. https://doi.org/10.4334/JKCI.2007.19.1.067
  6. Joo, H.J., Jung, J.H., Kim, B.S. and Yoon, S.J., "An Experimental Study on the Behavior of Shear Connectors for FRP-Concrete Composite Deck", Conference of the Korean Society of Civil Engineers, pp.1-4, 2005.
  7. Bank, L.C., "Composites for construction: Structural design with FRP materials", John Wiley & Sons, USA, 2006.
  8. Bank, L.C., Oliva, M.G., Bae, H.U., Barker, J. and Yoo, S.W., "Pultruded FRP plank as formwork and reinforcement for concrete members", Advances in Structural Engineering, Vol.10, No.5, pp.1-11, 2007. https://doi.org/10.1260/136943307780150878
  9. Carreira, D.J. and Chu, K.H., "Stress-Strain Relationship for Reinforced Concrete in Tension", ACI Journal, Vol.83, No.1, pp21-28, 1985.
  10. Deskovic, N., Triantafillou, T.C. and Meier, U., "Innovative design of FRP combined with concrete : Short-term behavior", Journal of Structural Eng ineering, Vol.121, No.7, pp.1069-1078, 1995. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:7(1069)
  11. Dieter, D.A., Dietsche, J.S. ,Bank, L.C., Oliva, M.G. and Russell, J.S., "Concrete bridge decks constructed with FRP stay-in-place forms and FRP grid rei nforcing", Transportation Research Record No.1814, Journal of the Transportation Research Board, pp.219-226, 2002.
  12. Hall, J.E. and Mottram, J.T., "Combined FRP reinforcement and permanent formwork for concrete members", Journal of Composites for Constructions, Vol.2, No.2, pp.78-86, 1998. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:2(78)
  13. HKS, "ABAQUS User's manual", Hibbitt, Karlsson & Sorensen Inc., Pawtucket, RI, USA, 2008.
  14. Hulatt, J., Holloway, L. and Thorne, A., "The use of advanced polymer composites to form an economic structural unit", Construction and Building Materials, Vol.17, No.1, pp.55-68, 2003. https://doi.org/10.1016/S0950-0618(02)00093-4
  15. Moussa, G.S., "Nonlinear finite element analysis of fiber composite reinforced concrete bridge deck sy stem", MS Thesis, University of Central Florida, USA, 2003.
  16. Oguejiofor, E.C. and Hosain, M.U. "A parametric study of perfobond rib shear connectors", Canadian Journal of Civil Engineering, Vol.l21, 1994, pp.614-625.
  17. Teng, T.G., Chen, J.F., Smith, S.T. and Lam, L. "FRP-strengthened RC structures", John Wiley & Sons, England, 2002.