Abstract
In this paper, we present the design procedure of the synchronizer and the demodulator of a 13.56MHz RFID PJM tag, which was standardized in ISO 18000-3 mode 3. We optimize the algorithms in order to minimize the number of registers and implement them based on international standard. The designed module is simulated by Modelsim and FPGA. The synchronizer is composed of 3 correlators that is implemented by 1,024(16bit ${\times}$ 64cycle) registers. The demodulator is composed of 2 correlators that is implemented by 128(2bit ${\times}$ 64cycle) registers. The simulation performed with the demodulator integrated with the synchronizer shows that it works at about 87% success rate with the test data of SNR -2dB and 100% with those of SNR 4dB.
본 논문에서는 18000-3 모드 3로 국제표준화된 13.56MHz RFID PJM(Phase Jitter Modulation) 모드 태그의 동기부 및 복조부 설계를 위해서 최근에 제안된 동기, 복조 알고리즘을 최적화하여 설계하고 구현하는 과정을 보인다. 두 알고리즘을 분석하여 불필요한 레지스터 사용을 최소화하고 국제표준에 근거하여 구현하며, 시뮬레이션 및 테스트는 모델심(Modelsim)과 알테라(Altera) FPGA를 이용하여 검증한다. 3개의 상관기로 구성된 동기부를 구현하기 위해서 총 1,024(16bit ${\times}$ 64cycle)개의 레지스터를 사용하고, 2개의 상관기를 갖는 복조부를 구현하기 위해서 128(2bit ${\times}$ 64cycle)개의 레지스터를 사용한다. 마지막으로 동기부, 복조부를 연동시켜 시뮬레이션을 수행하여, 잡음환경에서 SNR -2dB일 경우에 는 87%의 성공률을, 4dB 이상일 경우에는 100% 성공함을 보인다.