DOI QR코드

DOI QR Code

Control and Analysis of an Integrated Bidirectional DC/AC and DC/DC Converters for Plug-In Hybrid Electric Vehicle Applications

  • Hegazy, Omar (Dept. of Electrical Engineering and Energy Technology (ETEC), Vrije Universiteit Brussel (VUB)) ;
  • Van Mierlo, Joeri (Dept. of Electrical Engineering and Energy Technology (ETEC), Vrije Universiteit Brussel (VUB)) ;
  • Lataire, Philippe (Dept. of Electrical Engineering and Energy Technology (ETEC), Vrije Universiteit Brussel (VUB))
  • 투고 : 2010.12.31
  • 발행 : 2011.07.20

초록

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

키워드

참고문헌

  1. W. Kramer, S. Chakraborty, B. Kroposki, and H. Thomas, "Advanced power electronic interfaces for distributed energy systems, part 1: systems and topologies", Technical Report, FY2008, 2008.
  2. A. Emadi, Y. J. Lee, and K. Rajashekara, "Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles," IEEE Trans. Ind. Electron., Vol. 55, No. 6, pp. 2237-2245, Jun. 2008. https://doi.org/10.1109/TIE.2008.922768
  3. J. Axsen, A. Burke, and K. Kurani, "Batteries for plug-in hybrid electric vehicles (phevs)," Goals and the State of Technology circa 2008, 2008.
  4. L. Shi, A. Meintz, and M. Ferdows, "Single-phase bidirectional ac-dc converters for plug-in hybrid electric vehicle applications," IEEE Vehicle Power and Propulsion Conference (VPPC), 2008.
  5. Y.-J. Lee, A. Khaligh and A. Emadi "Advanced integrated bidirectional ac/dc and dc/dc converter for plug-in hybrid electric vehicles," IEEE Trans. Veh. Technol., Vol. 58, No. 8, pp 3970-3980, Oct. 2009. https://doi.org/10.1109/TVT.2009.2028070
  6. S. Haghbin, K. Khan, S. Lundmark, M. Alakula, O. Carlson, M. Leksell, and O. Wallmark, "Integrated chargers for EVs and PHEVs: examples and new solutions," IEEE International Conference on Electrical Machines (ICEM) proceedings, 2010.
  7. S. Lacroix, E. Laboure, and M. Hilairet, "An integrated fast battery charger for electric vehicle," IEEE Vehicle Power and Propulsion Conference, 2010.
  8. D. C. Erb, O. C. Onar, A. Khaligh, "Bi-directional charging topologies for plug-in hybrid electric vehicles," in Proc. IEEE Applied Power Electronics Conference and Exposition, pp. 2066-2072, 2010.
  9. G.-Y. Choe, J.-S. Kim, B.-K. Lee, C.-Y. Won, and T.-W. Lee, "A Bidirectional Battery Charger for Electric Vehicles Using Photovoltaic PCS Systems," IEEE Vehicle Power and Propulsion Conference, 2010.
  10. H. Xu, X. Wen, and L. Kong, "Dual-Phase dc-dc converter in fuel cell electric vehicles," 9th IEEE International Power Electronics Congress, 2004.
  11. M. K., Kazimierczuk, Pulse-Width Modulated Dc-Dc Power Converters, John Wiley & Sons, Ltd, 2008.
  12. C. Sudhakarababu and Mummadi Veerachary, "DSP Based control of interleaved boost converter," Journal of Power Electronics, Vol. 5, No. 3, Jul. 2005.
  13. J. Van Mierlo., P. Van den Bossche, G. Maggetto "Models of energy sources for EV and HEV: fuel cells, batteries, ultracapacitors, flywheels and engine-generators," Journal of Power Sources, Vol. 128, No. 1, pp. 76-89, Mar. 2004. https://doi.org/10.1016/j.jpowsour.2003.09.048
  14. A. M. A. Amin, M. I. Korfally, A. A. Sayed, and O. T. M Hegazy, "Efficiency optimization of two asymmetrical windings induction motor based on swarm intelligence," IEEE Trans. Energy Convers., Vol. 24, No. 1, pp. 12-20, Mar. 2009. https://doi.org/10.1109/TEC.2008.2011831
  15. K. Aissa and K. D. Eddine, "Vector control using series iron loss model of induction, motors and power loss minimization," World Academy of Science, Engineering and Technology 52 , 2009.
  16. O. Hegazy, and J. Van Mierlo, "A novel eight switches inverter operation modes for plug-in hybrid electric vehicle," Electromotion International journal, Vol. 17, No. 3, pp. 191-208, Jul./Sep. 2010.
  17. O. Hegazy, J. Van Mierlo, B. Verbrugge, and O. Ellabban, "Optimal power sharing and design optimization for fuel cell/battery hybrid electric vehicles based on swarm intelligence," The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov.. 2010.
  18. J. Ra¸bkowski, "Grid-connected Z-source inverter with resonant controller," in Proc. of Nordic Workshop of Power and Industrial Electronics, 2006.
  19. S. Buso and P. Mattavelli, Digital Control in Power Electronics, Morgan and Claypool Publishers, 2006.
  20. O. Ellabban, O. Hegazy, J. Van Mierlo, and P. Lataire, "Dual loop digital control design and implementation of a dsp based high power boost converter in fuel cell electric vehicle," IEEE OPTIM, 2010.

피인용 문헌

  1. AC Regeneratable Battery Charging and Discharging Test System vol.17, pp.2, 2012, https://doi.org/10.6113/TKPE.2012.17.2.99
  2. Design and Analysis of Generic Energy Management Strategy for Controlling Second-Life Battery Systems in Stationary Applications vol.9, pp.12, 2016, https://doi.org/10.3390/en9110889
  3. Integrated Electric Motor Drive and Power Electronics for Bidirectional Power Flow Between the Electric Vehicle and DC or AC Grid vol.28, pp.12, 2013, https://doi.org/10.1109/TPEL.2013.2258471
  4. A Phase Current Reconstruction Technique Using a Single Current Sensor for Interleaved Three-phase Bidirectional Converters vol.11, pp.4, 2016, https://doi.org/10.5370/JEET.2016.11.4.905
  5. An Advanced Power Electronics Interface for Electric Vehicles Applications vol.28, pp.12, 2013, https://doi.org/10.1109/TPEL.2013.2256469
  6. Design and Implementation of Modified Current Source Based Hybrid DC - DC Converters for Electric Vehicle Applications vol.17, pp.2, 2016, https://doi.org/10.4313/TEEM.2016.17.2.57
  7. Optimal PFC corrector of single stage power converter using BC tuned PID controller vol.30, pp.6, 2016, https://doi.org/10.3233/IFS-152059
  8. Analysis, Modeling, and Implementation of a Multidevice Interleaved DC/DC Converter for Fuel Cell Hybrid Electric Vehicles vol.27, pp.11, 2012, https://doi.org/10.1109/TPEL.2012.2183148
  9. Design of Leakage Inductance in Resonant DC-DC Converter for Electric Vehicle Charger vol.48, pp.11, 2012, https://doi.org/10.1109/TMAG.2012.2196027
  10. A Bidirectional DC–DC Converter With Overlapping Input and Output Voltage Ranges and Vehicle to Grid Energy Transfer Capability vol.2, pp.3, 2014, https://doi.org/10.1109/JESTPE.2014.2305157
  11. Interleaved 4-Phases DC/DC Converter for Electric Scooter to Improve Efficiency vol.225, pp.2261-236X, 2018, https://doi.org/10.1051/matecconf/201822503013