References
- T. Nicholas, 1980, Tensile testing of materials at high rates of strain, Exper. Mech., Vol 21, pp. 177-185.
- M. Nabi Bassim, 1999, High strain rate effects on the strain of alloy steels, J. Mater. Process. Technol., Vol.92-93, pp. 481-485. https://doi.org/10.1016/S0924-0136(99)00248-4
- R. Smerd, 2005, High Strain rate Tensile testing of Automotive Aluminum Alloy Sheet, Int. J. Imp. Eng., Vol. 32, pp. 541-560. https://doi.org/10.1016/j.ijimpeng.2005.04.013
- S. Curtze, 2009, Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates, Mater. Sci. Eng. A, Vol. 507, pp. 124-131. https://doi.org/10.1016/j.msea.2008.11.050
- B. L. Boyce, 2009, The Dynamic tensile behavior of tough, ultrahigh-strength steels at strain-rates from 0.00002/s to 200/s, Int. J. Imp. Eng, Vol.36, pp. 263-271. https://doi.org/10.1016/j.ijimpeng.2007.11.006
- S. Oliver, 2007, Dual phase versus TRIP strip steels: Microstructural changes as a consequence of quasistatic and dynamic tensile testing, Mater. Charac., Vol. 58, pp. 390-400. https://doi.org/10.1016/j.matchar.2006.07.004
- H. Huh, 2008, Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body, Int. J. Mech. Sci., Vol.50, pp. 918-931. https://doi.org/10.1016/j.ijmecsci.2007.09.004
- ASTM Standard E562-02. Standard test Method for Determining Volume Fraction by systematic manual point count. ASTM Int.
- ASTM Standard E 112-96, Standard test Method for Determining Average grain size, ASTM Int.
- G. Regazzoni, 1986, Theoretical Study of the Dynamic Tensile Test, J. App. Mech., Vol. 53, pp. 519-528. https://doi.org/10.1115/1.3171805
- T. A. KOP, 2001, Dilatometric analysis of phase transformations in hypo-eutectoid steels, J. Mater. Sci., Vol. 36, pp. 519-526. https://doi.org/10.1023/A:1004805402404
- G. E. Dieter, 1986, Mechanical Metallurgy, McGraw- Hill, Second edition.
- A. Uenishi, 2005, Microstructure evolution at high strain rates in solution-hardened interstitial free steels, Mater. Sci. Eng. A, Vol. 400-401, pp. 499-503. https://doi.org/10.1016/j.msea.2005.02.066
- F. A. Khalid, 1996, A TEM study of deformation substructure in high strain rate and explosively shock-loaded polycrystalline Iron, JMEPEG, Vol. 5, pp. 23-26. https://doi.org/10.1007/BF02647264
- S. B. Kim, 2007, Dynamic tensile characteristics of the high strength steel sheet for an auto-body, KSAE, Vol. 15, pp. 171-229.
- S. Takebayashi, 2010, Comparison of the dislocation density in martensite steels evaluated by some X-ray diffraction methods, ISIJ Int., Vol. 50, pp.875-882. https://doi.org/10.2355/isijinternational.50.875
- Y. F. Ivanov, 2009, Electron-beam modification of the pearlite steel, The Arab. J. Sci. Eng., Vol. 34, pp. 219-229.
- V. I. Izotov, 2007, Influence of the Pearlite Fineness on the Mechanical Properties, Deformation Behavior, and Fracture Characteristics of Carbon Steel, The Phys. Met. Metall., Vol. 103, pp. 519-529. https://doi.org/10.1134/S0031918X07050122
- J. H. Yoon, 2008, Ph. D, Microscopic investigation of the strain rate hardening for auto-body steel sheet, KAIST, Daejeon, pp. 35-40.