Abstract
Population dynamics of greenhouse whitefly, Trialeurodes vaporariorum (Westwood), were modeled and simulated to compare the temperature effects of air and tomato leaf inside greenhouse using DYMEX model simulator (pre-programed module based simulation program developed by CSIRO, Australia). The DYMEX model simulator consisted of temperature dependent development and oviposition modules. The normalized cumulative frequency distributions of the developmental period for immature and oviposition frequency rate and survival rate for adult of greenhouse whitefly were fitted to two-parameter Weibull function. Leaf temperature on reversed side of cherry tomato leafs (Lycopersicon esculentum cv. Koko) was monitored according to three tomato plant positions (top, > 1.6 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at same three positions using a Hobo self-contained temperature logger. The leaf temperatures from three plant positions were described as a function of the air temperatures with 3-parameter exponential and sigmoidal models. Data sets of observed air temperature and predicted leaf temperatures were prepared, and incorporated into the DYMEX simulator to compare the effects of air and leaf temperature on population dynamics of greenhouse whitefly. The number of greenhouse whitefly immatures was counted by visual inspection in three tomato plant positions to verify the performance of DYMEX simulation in cherry tomato greenhouse where air and leaf temperatures were monitored. The egg stage of greenhouse whitefly was not counted due to its small size. A significant positive correlation between the observed and the predicted numbers of immature and adults were found when the leaf temperatures were incorporated into DYMEX simulation, but no significant correlation was observed with the air temperatures. This study demonstrated that the population dynamics of greenhouse whitefly was affected greatly by the leaf temperatures, rather than air temperatures, and thus the leaf surface temperature should be considered for management of greenhouse whitefly in cherry tomato grown in greenhouses.
방울토마토(Lycopersicon esculentum cv. Koko) 재배 온실에 피해를 주는 온실가루이 개체군(Trialeurodes vaporariorum (Westwood))의 온도 발육 모형과 암컷 성충 산란 모형을 작성하여 시설 내 대기 중 온도와 미기상 온도인 잎 뒷면 온도를 적용한 DYMEX 프로그램(호주 CSIRO에서 개발한 미리 탑재된 모듈들을 사용하는 모의 실험 프로그램)으로 밀도 변동을 모의 실험하였다. 온도에 따라 상이한 발육 기간과 산란수를 각각 표준화시킨 발육 완료 분포 모형과 연령 특이적 산란수와 생존율을 비선형 회귀 모형에 적합시켜 밀도 변동 모의 실험을 하였다. 실제 줄내림 방식의 방울 토마토에서 토마토 식물체를 3위치(상단: 지상 1.6m 이상, 중단: 지상 0.9-1.2m 사이, 하단: 지상 0.3-0.5m 사이)로 나누어 각 위치별로 온실 내 대기 중 온도와 잎 뒷면 온도를 기록하였다. 온실 내 대기 중 온도와 잎 뒷면 온도간의 상관 관계를 비선형 회귀로 적합하여, 온실 내 미기상 온도 자료를 만들었다. 온실 내 미기상 온도 자료인 잎 뒷면 최대 온도는 대기 중 최대 온도보다 항상 낮게 유지되고 있었으며, 하단, 상단, 중단의 순으로 온도가 낮아지는 현상을 보였다. 모의 실험을 위한 시기와 초기 이입 밀도의 설정은 황색 점착 트랩을 이용하여 실제 온실에서 이입되는 시기(6월초)에 유인된 암컷 성충 10마리를 사용하였다. 온실 내 대기 중 온도 자료와 잎 뒷면 온도 자료를 각각 이용하여 온실가루이 유충의 발육 모형과 성충의 산란 모형을 DYMEX 프로그램으로 모의 실험하였다. 모의 실험 결과 검증을 위해 대기 중 온도와 잎뒷면 온도를 조사한 온실에서 토마토 식물체 3위치별, 각태별 온실가루이 밀도의 육안 조사도 실시하였다. 알의 경우 크기로 인해 육안 조사 대상에서 제외되었다. 육안 조사 결과와 육안 조사 시기의 DYMEX 모의 실험 결과값을 상관 분석하였다. 육안 조사 온실가루이 밀도와 잎 뒷면 온도를 이용한 모의 실험 결과 밀도가 모든 발육태에서 항상 양의 상관 관계를 보였다. 육안 조사 결과 밀도 변동 패턴도 방울토마토 잎 뒷면 온도를 이용한 모의 실험 결과 밀도 변동 패턴과 유사하였다. 본 연구 결과 방울토마토 온실에서 온실가루이 개체군 밀도 변동의 적절한 예측을 위해서는 잎 뒷면 온도를 고려해야 하는 것으로 나타났다.