Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지
DOI QR코드

DOI QR Code

Development of the Magnetic Abrasive Using Sr-Ferrite and GC

Sr-Ferrite와 GC를 이용한 자기연마재 개발

  • Yun, Yeo-Kwon (Department of Mechanical Design, Yuhan University) ;
  • Kim, Sang-Baek (Graduate School of Mechanical Engineering, Myongji University) ;
  • Kim, Hee-Nam (Department of Mechanical Engineering, Myongji University)
  • Received : 2010.05.27
  • Accepted : 2011.04.08
  • Published : 2011.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

The magnetic polishing is the useful method to finish using magnetic power of magnet. That method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe. The magnetic abrasive polishing method is not so common for machine that it is not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper deals with development of the magnetic abrasive using Sr-Ferrite. In this development, abrasive grain GC used to resin bond fabricated low temperature. And Sr-Ferrite of magnetic abrasive powder fabricated that Sr-Ferrite was crused into 200 mesh. The XRD analysis result show that only GC abrasive and Sr-Ferrite crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it is found that GC abrasive and Sr-Ferrite were strong bonding with each other by bond. The magnetic polishing is performed by polishing the surface of pipe by attracting magnetic abrasives with magnetic fields. This can be widely applied for finishing machinery fabrications such as various pipes and for other safety processes. In this paper, we could have investigated in to the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

Keywords

References

  1. Masahiro Anzai, Hiroshi Endo, Toru Sudo and Takeo Nakagawa, "磁氣を利用した チタン板の鏡面硏磨(자기를 이용한 티탄 판의 경면연마)", 鐵と鋼, Vol. 78, No. 2, pp. 141-143, 1992.
  2. Mashahiro Anzai, Toru Sudo and Takeo Nakagawa, "磁氣硏磨用砥粒の新製造技術とその硏磨特性(자기연마용 지립의 신제조기술과 그 연마특성)", 生産硏究, Vol. 43, No. 11, pp.13-22, 1991.
  3. Mashahiro Anzai, Takeo Nakagawa, "磁石を利用した金型磨き自動化の試み (자석을 이용한 금형마무리 자동화의 시도)", 機械と工具, Vol. 40, No. 6, pp. 41-46, 1992.
  4. Yong Chul Lee, Mashahiro Anzai and Takeo Nakagawa, "A study on Improving the Efficiency of Magnetic Abrasive Polishing for Die & Mold Surfaces", Journal of the KSPE, Vol. 13, No. 6, pp. 59-65, 1996.
  5. Takeo Shinmura, Eiju Hatano and Koya Takazawa, "平面磁氣硏磨裝置の開發とその硏磨性能 (평면자기연마장치의 개발과 연마성능)", Journal of JSPE, Vol. 52, No. 6, pp. 148-154, 1986.
  6. Takeo Shinmura, "磁氣硏磨法による曲面の平滑加工に關する硏究(第 1報, 基礎實驗) (자기연마법에 의한 곡면의 평활가공에 관한 연구)", Journal of JSME, Vol. 53, No. 485, pp. 202-208, 1987. https://doi.org/10.1299/kikaic.53.202
  7. Takeo Shinmura, Eiji Hauano, and Koya Takazawa, "磁氣硏磨法を利用した Spindle-finish方式硏磨裝置の開發とその硏磨性能 (자기연마법을 이용한 Spindle-finish 방식 연마장치의 개발과 연마성능)",Journal of JSPE, Vol. 53, No. 2, pp. 263-268, 1987.
  8. Takeo Shinmura, "磁氣硏磨法とその應用 (자기연마법과 응용)", 機械の 硏究, Vol. 40, No. 10, pp. 47-52, 1988.
  9. Takeo Shinmura, "円筒磁氣硏磨法 (원통자기연마법)", 機械技術, Vol. 44, No. 8, pp. 108-112, 1996.
  10. Takeo Shinmura, Yoshitaka Hamato and Hitomi Yamaguchi, "磁氣硏磨法による 內面の精密バリ取リに關する硏究(第1報) (자기연마법에 의한 내면의 정밀 거스러미 제거에 관한 연구)", J. of JSME, Vol. 64, No. 620, pp. 312-318, 1998.
  11. Hitomi Yamaguchi, Takeo Shinmura and Tafehiro Kaneko, "Development of a New Internal Finishing Process Applying Magnetic Abrasive Finishing by Use of Pole Rotation System", Int. J. Japan Soc. Prec. Eng, Vol. 30, No. 4, pp. 317-322, 1996.
  12. Hitomi Yamaguchi, Takeo Shinmura, Atsuchi Kobayashi, "Development of an Internal Magnetic Abrasive Finishing Process for Nonferromagnetic Complex Shaped Tubes," JSME International Journal, Series C, Vol. 44, No. 1, 2001.
  13. 김희남, 윤여권, 심재환, "자기연마를 이용한 STS 304 파이프 내면의 초정밀 가공", Journal of the Korean Society of Safety, Vol. 17, No. 3, pp. 30-35, 2002.
  14. 김희남, 윤여권, 김상백, 최희성, 안효종, "Sludge를 이용한 자기 연마재 개발", Journal of the Korean Society of Safety, Vol. 19, No. 2, pp. 6-10, 2004.
  15. 김희남, 윤여권, 김상백, 최희성, "슬러지 연마입자를 이용한 이음매 없는 스테인리스강 튜브 내면의 자기연마" Transactions of KSAE, Vol. 12, No. 6, pp. 151-157, 2004.