Abstract
To manage sensing information such as temperature, humidity and so on efficiently, it is need to use special purpose protocol. In this reason, IETF WG proposed CoAP protocol, and it is on Internet draft. If it is possible to work on a specific protocol, sensor end-nodes and network devices will be managed efficiently. However, end-nodes have restricted resources, it is hard to applying to CoAP protocol directly. In this paper we analyse a CoAP protocol stack for USN. To verify this protocol quickly, at first we implemented CoAP protocol stack over PC environments. After the logical verification, we applied this protocol to the USN environment. To do this, we ported CoAP protocol to Cygwin environment, and proposed solutions for hardware dependencies, and it is verified through experiments.
제한된 자원을 갖는 센서 노드를 효율적으로 관리하기 위해, IETF WG에서 2010년에 CoAP 프로토콜을 발표하였다. 아직 RFC로 확정 받지 않은 상태이기 때문에, 이 프로토콜의 단점을 보완하고, 논리적인 검증이 필요하다. 본 논문에서는 PC환경에서 CoAP 프로토콜을 구현하고, 프로토콜의 신속한 논리적 검증을 확인한 후, 이를 기반으로하여 실제 센서 노드 및 네트워크 노드에 적용한다. 메모리와 컴퓨팅 능력 등이 PC 환경과 비교하여 크게 제한되기 때문에, 센서 노드에 적용하기 위해서는 하드웨어에 종속적인 환경 적용이 필요하다. 이를 위해 Cygwin 환경에 포팅하고, 하드웨어 종속성을 해결하기 위한 방법 등을 제시하고, 이를 실험을 통해 검증한다.