DOI QR코드

DOI QR Code

Characterization of $TiO_2$ base catalyst for de-NOx

질소산화물 제거를 위한 $TiO_2$계 촉매 제조 및 특성 시험

  • Kim, Tae-Hoon (Dept. of Environmental Engineering, Kangwon National University) ;
  • Jo, Young-Min (Dept. of Environmental Sci. & Eng., Kyung Hee University) ;
  • Park, Young-Koo (Dept. of Environmental Engineering, Kangwon National University)
  • Received : 2011.09.06
  • Accepted : 2011.10.20
  • Published : 2011.12.30

Abstract

One of main catalysts for De-NOx in SCR is a $V_2O_5/TiO_2$, and this work formulated powdery catalysts focusing ultimately on corrugate catalytic support. The prepared catalyst consisted of anatase $TiO_2$. Amount of the added vanadium oxide determined the viscosity of catalyst slurry, which is important for washcoat for a final corrugate type catalytic reactor. The test showed a proportional relation between adsorption amount of ammonia and specific surface area. De-NOx efficiency could be obtained up to 96.3 % at $400^{\circ}C$ with a spacial velocity of $4,000hr^{-1}$.

Keywords

References

  1. S. C. Hong, The Effect of $SO_2$ in Flue Gas on the SCR Activity of V/$TiO_2$, J.Korean Ind. Eng. Chem, Vol.17, No.5, .490-497 (2006).
  2. T. Sterner and B. Turnheim, Innovation and diffusion of environmental technology: Industrial NOx abatement in Sweden under refunded emission payments, Ecological Economics, Vol.68, Issue 12, 2996-3006 (2009). https://doi.org/10.1016/j.ecolecon.2009.06.028
  3. H. Bosch and F. Janssen, Formation and control of nitrogen oxides, Catalysis Today, Vol.2, 369-379 (1998).
  4. V. I. Paevulescu, P. Geaege, and B. Delmon, Catalytic removal of NO, Catalysis Today, Vol.46, .233-316 (1998). https://doi.org/10.1016/S0920-5861(98)00399-X
  5. S. M. Cho, Properly apply selective catalytic reduction for NOx removal, Chem. Eng. Prog., Vol. 90, 39-45. (1994).
  6. R. M. Heck, Catalytic abatement of nitrogen oxides-stationary applications, Catalysis Today, Vol.53, 519-523 (1999). https://doi.org/10.1016/S0920-5861(99)00139-X
  7. S. K. Jeong and S. C. Hong, The Characteristic of Selective Catalytic Reduction of Nitrogen Oxides over Natural Manganese Ore with $NH_3$ at Low Temperature, J. korea Ind. Eng. Chem. Vol.12, No.8, 841-845 (2001).
  8. L. L. Sloss, A. K. Hjakmasson, H. N. Soud, L. M. Cambell, D. K. Stome, G. S. Shareef, T. Emmel, M. Maibodi, C. D. Livemgood, and J. Markvssen, Nitrogen Oxides Control Technology Fact Book, Plenum Press, New York (1992).
  9. G. Ertl, H. Knozinger, and J. Weitcamp, Handbook of Heterogeneous Catalysis, Vol.4, VCH Ltd., Germany (1997).
  10. K. Otto, M. Shelef and J. T. Kummer, Studies of Surface Reactions of Nitric Oxide by Nitrogen-15 Isotope Labelling : Part 1. The Reaction between Nitric Oxide and Ammonia over Supported Platinum at 200-250${^{\circ}C}$, J. Phys. Chem., Vol.74, 2690 (1970). https://doi.org/10.1021/j100707a017
  11. 한요셉, "$V_2O_5$-$TiO_2$ 촉매 코팅된 세라믹 폼필터 제조 및 NOx 제거 특성에 관한 연구", 한양대 석사학위논문, 47 (2004).
  12. L. Lietti, Reactivity of $V_2O_5$-$WO_3$/$TiO_2$ de-NOx catalysts by transient methods, Appl.. Catal. B: Environmental, Vol.10, 281, (1996). https://doi.org/10.1016/S0926-3373(97)80001-X