DOI QR코드

DOI QR Code

Common Mode Stub를 이용한 Flexible T-DMB 안테나 구현

Design Flexible T-DMB Antenna with Common Mode Stub

  • 이선현 (금오공과대학교 전자공학부) ;
  • 김호진 (금오공과대학교 전자공학부) ;
  • 이상석 (한국전자통신연구원 융합부품소재연구부문 전자종이기술연구팀) ;
  • 이영훈 (금오공과대학교 전자공학부)
  • Lee, Seon-Hyeon (Department of Electronic Engineering, Kumoh National Institute of Technology) ;
  • Kim, Ho-Jin (Department of Electronic Engineering, Kumoh National Institute of Technology) ;
  • Lee, Sang-Seok (The Convergence Components & Materials Research Laboratory, ETRI) ;
  • Lee, Young-Hun (Department of Electronic Engineering, Kumoh National Institute of Technology)
  • 심사 : 2011.06.14
  • 발행 : 2011.06.30

초록

본 논문에서는 차량 앞유리에 탈부착이 가능한 다이폴 형태의 T-DMB 수신용 안테나를 설계하였다. 안테나의 구조는 동박과 급전선의 매우 간단한 구조를 가지며, 운전자의 시야에서 완벽히 벗어날 수 있도록 차량 유리의 테두리 쪽에 존재한다. 차체의 특성과 안테나의 입력 임피던스 특성을 고려하여 제안된 미앤더 형태의 다이폴 안테나는 T-DMB 주파수 대역(174~216 MHz)을 만족한다. Common Mode Stub를 추가한 Flexible 안테나는 차량 앞유리에서 부착되는 위치에 상관없이 안테나의 입력 반사 손실은 -5 dB 이하를 가지는 것이 가장 큰 특징이다.

In this paper, we designed detachable T-DMB receiver antenna on the windshield of the car. Designed antenna is composed of only copper and feeders. To escape completely from driver's sight, it exists edging of windshield. Proposed antenna by considering body of properties and characteristics of the antenna input impedance have T-DMB frequency band(174~216 MHz). Proposed flexible antenna with Common Mode Stub is satisfied characteristics less than -5 dB antenna input return loss regardless of installation position on windshield.

키워드

참고문헌

  1. E. Gschwendtner, Wiesbeck, "Ultra-broadband car antennas for communications and navigation applications", IEEE Trans Antennas Propag., vol. 51, no. 8, Aug. 2003.
  2. A. R. Ruddle, S. C. Pomeroy, and D. D. Ward, "Modelling the installed performance of automotive antennas integrated with vehicle glazing", 11th Int. Conf. on Antennas Propagation, Manchester, UK, vol. 2, no. 480, pp. 732-735, Apr. 2001.
  3. 박창현, 신동률, 김정표, 김기호, 양묘근, 성원모 "지상파 DMB용 능동형 안테나의 설계 및 제작", 한국전자파학회논문지, 18(1), pp. 44-51, 2007년 1월. https://doi.org/10.5515/KJKIEES.2007.18.1.044
  4. C. A. Balanis, Antenna Theory Analysis and Design 3e, Wiley-Interscience, 2005.
  5. R. Abou-Jaoude, E. K. Walton, "Numerical modeling of on-galss conformal automobile antennas", IEEE Trans. Antennas Propag., vol. 46, no. 6, pp. 845-852, Jun. 1998. https://doi.org/10.1109/8.686772
  6. 안승법, 계영철, 추호성, "다중 루프 형태의 차량용 글라스 안테나", 한국전자파학회논문지, 20(3), pp. 230-239, 2009년 3월.
  7. Jinwoo Jung, Hyeonjin Lee, and Yeongseog Lim, "Broadband flexible meander line antenna with vertical lines", Microwave and Optical Technology Letters, vol. 49, no. 8, pp. 1984-1987, Aug. 2007. https://doi.org/10.1002/mop.22564
  8. E. Antonino-Daviu, M. Cabedo-Fabres, M. Ferrando-Bataller, and A. Valero-Nogueira, "Wideband double-fed planar monopole antennas", Electron Letts., vol. 39, no. 23, pp. 1262-1269, Nov. 2003.
  9. K. -L. Wong, C. -H. Wu, and S. -W. Su, "Ultrawide-band square planar metal-plate monopole antenna with a trident-shaped feeding strip", IEEE Trans Antennas Propag., vol. 53, no. 4, Apr. 2005. https://doi.org/10.1109/TAP.2005.844430
  10. 김호진, 이선현, 이영훈, 이상석, "매칭 회로와 구형 stub를 이용한 flexible T-DMB 안테나 구현에 관한 연구", 한국전자파학회논문지, 22(2), pp. 236-244, 2011년 2월. https://doi.org/10.5515/KJKIEES.2011.22.2.236