과제정보
연구 과제 주관 기관 : 한국연구재단
참고문헌
- H. S. Jeong, T. Shinoda, 1997, Fundamentals and Basic Application of Friction Welding, J. Kor. Weld. Soc, Vol. 15(6), pp. 1-12.
- A. Z. Sahin, B. S. Yibas, M. Ahmed, J. Nickel, 1998, Analysis of the Friction Welding Process in Relation to the Welding of Copper and Steel Bar, J. Mater. Process. Technol., 82, pp. 127-136. https://doi.org/10.1016/S0924-0136(98)00032-6
- L. D'Alvisea, E. Massonia, S. J. Walloe, 2002, Finite element modelling of the inertia friction welding process between dissimilar materials, J. Mater. Process. Technol., Vol. 125-126, pp. 387-391. https://doi.org/10.1016/S0924-0136(02)00349-7
- Mumin Sahin, 2004, Simulation of friction welding using a developed computer program, J. Mater. Process. Technol., Vol. 153-154, pp. 1011-1018. https://doi.org/10.1016/j.jmatprotec.2004.04.287
- P. D. Sketchly, P. L. Threadgill, I. G. Wright, 2002, Rotary Friction Welding of a Fe3Al based ODS alloy, Mater. Sci. Eng., A 329-331, pp. 756-762. https://doi.org/10.1016/S0921-5093(01)01656-2
- H. J. Liu, H. Fujii, M. Maeda, K. Nogi, 2003, Tensile Properties and Fracture Locations of Friction-stir-welded Joints of 2017-T351 Aluminum Alloy, J. Mater. Process. Technol., Vol. 142, pp. 692-696. https://doi.org/10.1016/S0924-0136(03)00806-9
- A. A. M. d. silva, A. Meyer, J. F. d. Santos, C. E. F. Kwietniewski, T.R. Strohaecker, 2004, Mechanical and Metallurgical Properties of Friction welded TiC Particulate Reinforced Ti-6Al-4V, Compos. Sci. Technol., Vol. 64, pp. 1495-1501. https://doi.org/10.1016/j.compscitech.2003.10.017
- D. G. Lee, K. C. Jang, J. M. Kuk, I. S. Kim, 2004, Fatigue Properties of Inertia dissimilar Frictionwelded Stainless Steels, J. Mater. Process. Technol., Vol. 155-156, pp. 1402-1407. https://doi.org/10.1016/j.jmatprotec.2004.04.400
- S. Park, K. Um, N. Ma, K. Ahn, K. H. Chung, C. Kim, K. Okamoto, R. H. Wagoner, K. Chung, 2007, Analysis of Failure Phenomena in Uni-axial Tension Tests of Friction Stir Welded AA6111-T4, AA5083-H18 and DP-Steel, Trans. Mater. Process., Vol. 16, No. 4, pp. 304-308. https://doi.org/10.5228/KSPP.2007.16.4.304
- R. Moat, M. Karadge, M. Preuss, S. Bray, M. Rawson, 2008, Phase transformations across high strength dissimilar steel inertia friction weld, J. Mater. Process. Technol., Vol. 204, pp. 48-58. https://doi.org/10.1016/j.jmatprotec.2007.10.074
- H. S. Jeong, J. R. Cho, H. C. Park, 2007, Development of Dissimilar Inertia Welding Process of Large Superalloy Spindle, Key Eng. Mater., Vol. 345-346, pp. 1429-1432. https://doi.org/10.4028/www.scientific.net/KEM.345-346.1429
- H. S. Jeong, J. R. Cho, J. S. Oh, E. N. Kim, S. G. Choi, M. Y. Ha, 2010, Inertia Friction Welding Process Analysis and Mechanical Properties Evaluation of Large Rotor Shaft in Marine Turbo Charger, Int. J. Prediction Eng. and Manuf., Vol. 11, No. 1, pp. 83-88. https://doi.org/10.1007/s12541-010-0010-7
피인용 문헌
- Development of integrated stub end by spinning process vol.16, pp.7, 2015, https://doi.org/10.1007/s12541-015-0195-x
- Forming-die-free integrated stub-end manufacturing process using spinning vol.17, pp.5, 2016, https://doi.org/10.1007/s12541-016-0083-z