과제정보
연구 과제 주관 기관 : 부산대학교
참고문헌
- H. Takuda, T. Morishita, T. Kinoshita, N. Shirakawa, 2005, Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures, J. Mater. Process. Technol., Vol. 164-165, pp. 1258-1262. https://doi.org/10.1016/j.jmatprotec.2005.02.034
- J. H. Lee, S. H. Kang, Forming technologies of magnesium alloy sheet and automobile applications, 2007, Auto J., pp. 24-31.
- M. H. Lee, K. K. Kim, H. Y. Kim, S. I. Oh, 2008, Evaluation of the formability of warm forming simulation of magnesium alloy sheet using FLD, Trans. Mater. Process., Vol. 17, pp. 501-506. https://doi.org/10.5228/KSPP.2008.17.7.501
- Y. C. Lin, M. S. Chen, J. Zhong, 2008, Constitutive modelling for elevated temperature flow behavior of 42CrMo steel, Comp. Mater. Sci., Vol. 42, pp. 470-477. https://doi.org/10.1016/j.commatsci.2007.08.011
- Y. C. Lin, M. S. Chen, J. Zhong, 2008, Prediction of 42CrMo steel flow stress at high temeprature and strain rate, Mech. Res. Commun., Vol. 35, pp. 142-150. https://doi.org/10.1016/j.mechrescom.2007.10.002
- Y. J. Qin, Q. L. Pan, Y. B. He, W. B. Li, X. Y. Liu, X. Fan, 2010, Modellng of flow stress for magnesium alloy during hot deformation, Mat. Sci. Eng. A-Struct., Vol. 527, pp. 2790-2797. https://doi.org/10.1016/j.msea.2010.01.035
- K. Mathis, Z. Trojanova, P. Lukac, C. H. Caceres, J. Lendvai, 2004, Modelling of hardening and softening processes in Mg alloys, J. Alloy. Compd., Vol. 378, pp. 176-179. https://doi.org/10.1016/j.jallcom.2003.10.098
- X. Huang, K. Suzuki, A. Watazu, I. Shigematsu, N. Saito, 2008, Mechanical properties of Mg-Al-Zn alloy with a titled basal texture obtained by differential speed rolling, Mat. Sci. Eng. A-Struct., Vol. 488, pp. 2790-2797.
- Z. Zeng, S. Jonsson, H. J. Roven, Y. Zhang, 2009, Modelling the flow stress for single peak dynamic recrystallization, Mater. Design, Vol. 30, pp. 1939-1943. https://doi.org/10.1016/j.matdes.2008.09.004
- C. Zener, H. Hollomon, 1944, Effect of strain rate upon plastic flow of steel, J. Appl. Phys., Vol. 15, pp. 22-32. https://doi.org/10.1063/1.1707363
- Z. Q. Sheng, R. Shivpuri, 2006, Modelling flow stress of magnesium alloys at elevated temperature, Mat. Sci. Eng. A-Struct., Vol. 419, pp. 202-208. https://doi.org/10.1016/j.msea.2005.12.020
피인용 문헌
- Finite Element Analysis of Superplastic Forming Considering Grain Growth-II. Superplastic Behavior of AZ31 Alloy vol.21, pp.7, 2012, https://doi.org/10.5228/KSTP.2012.21.7.403
- The Study of the Variation of Strain Rate Sensitivity Index depending on the Strain and Microstructural Observations of AZ31 Mg Alloy Sheet vol.20, pp.7, 2011, https://doi.org/10.5228/KSTP.2011.20.7.498
- Forming of Metallic Bipolar Plates by Dynamic Loading vol.21, pp.1, 2012, https://doi.org/10.5228/KSTP.2012.21.1.5
- Development of warm forming parts for automotive body dash panel using AZ31B magnesium alloy sheets vol.16, pp.10, 2015, https://doi.org/10.1007/s12541-015-0278-8
- The Effect of Temperature on Springback of AZ31, Ti-GR2 during V-bending with Focused Heating using Near-infrared Radiation vol.23, pp.8, 2014, https://doi.org/10.5228/KSTP.2014.23.8.469
- Evaluation of the Temperature Dependent Flow Stress Model for Thermoplastic Fiber Metal Laminates vol.24, pp.1, 2015, https://doi.org/10.5228/KSTP.2015.24.1.52
- Development of Automotive Dash Panel Parts Using Warm Drawing of Magnesium Alloy AZ31B vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.248