NURBS Interpolation Strategies of Complex Surfaces in High Speed Machining

The increase in the productivity and the assurance of quality machining on the NC machines depends on, amongst other things, the perfection of the programming using adequate methods of interpolation. The programming language is until now based on the code ISO 6983 which defines the principles of the code G. This latter is not well adapted to the new strategies of machining imposed by the machining of complex surfaces and machining at high speed with the increasingly more severe requirements of precision. The CNC which adopt the interpolation of NURBS (Non Uniform Rational B-spline) are very rare (FANUC Siemens${\ldots}$). Based on the advantages of NURBS (continuity, flexibility, smoothing$.{\ldots}$), new formats G are currently developed but their use is still very limited. Our work consists on putting forward these new approaches of programming using the interpolation of NURBS. For this reason, a program capable to trace NURBS trajectories under Visual BASIC 6.0 was developed. This program was used thereafter in CAM software for the generation of NURBS formats like their new formats NC.