한국응용과학기술학회지 (Journal of the Korean Applied Science and Technology)

  • 제28권3호
  • /
  • Pages.359-366
  • /
  • 2011
  • /
  • 1225-9098(pISSN)
  • /
  • 2288-1069(eISSN)
한국응용과학기술학회 (The Korean Society of Applied Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

Full-Grain 피혁용 수용성 아크릴 Base coat 수지의 합성 및 물성측정 연구

A Study of Synthesis and Mechanical property measurement for Waterborne Acrylic Base coat Resin in Full-Grain Leather

  • 이주엽 (대진대학교 공과대학 화학공학과) ;
  • 김기준 (대진대학교 공과대학 화학공학과)
  • Lee, Joo-Youb (Department of Chemical Engineering, Daejin University) ;
  • Kim, Ki-Jun (Department of Chemical Engineering, Daejin University)
  • 투고 : 2011.09.10
  • 심사 : 2011.09.26
  • 발행 : 2011.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study we experimented that how polyurethane effect to acrylic-polyurethane resin in Full-Grain leather coatings. First of all, we consummated waterborne acrylic emulsion and waterborne polyurethane resin, Than we prepared F.G leathers which were coated by acrylic resin and acrylic-polyurethane resins. According to measured data for solvent resistance, acrylic resin and acrylic-polyurethane resins had good property. Sample a(WAC) had most low strength($2.10kg_f/mm^2$) and sample d(WAC 93 : WPU 7) had most high strength($3.41kg_f/mm^2$). Also we knew that most good property of abrasion is d(47.4 mg). In elongation case, a(WAC) had most good result(645 %) in this experiment.

키워드

참고문헌

  1. J. Y. Lee, and K J. Kim, Study on Properties of Waterborne Polyurethane- Epoxy hybrid Resin for Leather Garment Coatings, J. Kor. Oil Chemist's Soc., 27, 325 (2010).
  2. A. R. Marrion (Ed.), The Chemistry and Physics of Coatings, Royal Society of Chemistry Paperbacks. 1 (1994).
  3. J. Y. Lee, and K. J. Kim, Study on Mechanical Properties of Waterborne Polyurethane-Acrylic Hybrid Resin for Leather Coatings, J. Kor. Oil Chemist's Soc., 27, 188 (2010).
  4. F. M. B. Coutinho, M. C. Delpech, P. M.Q. Moura, and S. D. S. Mello, Synthesis and molecular weight determination of urethane-based anionomers, Polym. Bull. 37, 1 (1996). https://doi.org/10.1007/BF00313811
  5. Elisabete Almeida, Dulcínea Santos, and Jorge Uruchurtu, Corrosion performance of waterborne coatings for structural steel, Prog. Org. Coatings, 37, 131 (1999). https://doi.org/10.1016/S0300-9440(99)00064-8
  6. R. A. Brown, R. G. Coogan, D. G. Fortier, M. S. Reeve. J. D. Rega, Comparing and contrasting the properties of urethane/acrylic hybrids with those of corresponding blends of urethane dispersions and acrylic emulsion. Prog. Org. Coatings, 52. 73 (2005). https://doi.org/10.1016/j.porgcoat.2004.03.009
  7. M. Hirose, J. Zhou, K. Nagai, The structure and properties of acrylicpolyurethane hybrid emulsion. Prog. Org. Coatings, 38, 27 (2000). https://doi.org/10.1016/S0300-9440(99)00081-8
  8. L. K. Aggarwal, P. C. Thapliyal, S. R. Karade, Properties of polymer-modified mortars using epoxy and acrylic emulsion, Con. Bul. Materials, 21, 379 (2007).
  9. Y. Okamoto, Y. Hasegawa, F. Yoshino, Urethane/acrylic composite polymer emulsions, Prog. Org. Coatings, 29, 175 (1996). https://doi.org/10.1016/S0300-9440(96)00660-1
  10. V. I. Yeliseyeva, N. G, Zharkova, A. V. Chubarova, P. I. Zubov, Emulsion polymerization of lower alkyl acrylates, Polym, Sci. U.S.S.R, 7, 171 (1965). https://doi.org/10.1016/0032-3950(65)90254-6
  11. S. K. Kim, P. W. Shin, D. C, Lee, Synthesis of Water Soluble Acrylic Modified Epoxyester Resin and Physical Properties of Coatings, J. Kor. Oil Chemist's Soc., 28, 35 (2011).