Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

EMI Mesh Development for the PDP using Electroforming

Electroforming을 이용한 PDP용 EMI 메시 개발

  • Received : 2010.10.06
  • Accepted : 2010.11.11
  • Published : 2011.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

There are a lot of PDP TV for a plasma discharge pulse voltage generated by the use of electromagnetic waves. EMI mesh film is near Infrared ray caused by malfunction of the remote control intended to prevent this phenomenon. In this study, the formation of fine pattern by making the mold is imprinted on the film sheet. EMI mesh film has been granted by filling in the conductive material region imprinted with electroforming in the manufacture of resistance. The fine patterns fabricated with electroforming facility thickness of homogenization process technology were established to optimize the working conditions.

Keywords

References

  1. Tony H., Alec W., 1999, Electroforming, Metal Finishing, Vol. 97 Issue 1, pp. 388-399.
  2. Metal surface treatment manual committee, 1990, Metal surface treatment manual, Sehwa, Korea.
  3. Watson S. A., 1990, Compendium on Nickel Electroplating and Electroforming, Nickel Development Institute, Canada.
  4. Baudrand. D., 1996, Nickel Sulfamate Plating, Its Mystique and Practicality, Metal Finishing, Vol. 94, Issue 7, pp. 15-18. https://doi.org/10.1016/0026-0576(96)81353-5
  5. Parkinson R., 1999, "Electroforming- a Unique Metal Fabrication Process," Proceedings of the Nikel Cobalt International Symposium Vol. 9, No. 3, pp. 140-142.
  6. McGeough J.A., Leu M.C., Rajurkar K.P., and Liu Q., 2001, "Electroforming Process and Application to Micro/Macro Manufacturing," CIRP Annals, Vol. 50, Issue 2, pp. 499-514. https://doi.org/10.1016/S0007-8506(07)62990-4
  7. Oh. J. G., Kim. J. S., Kang. J. J., Kim. J. D., Yoon. K. H., and Hwang, C. J., 2010, "A Study on the Fabricaton of Nano-Pattern Mold using Anodic Aluminum Oxide Membrane," Transactions of Materials Processing, Vol. 19, No. 2, pp. 73-78. https://doi.org/10.5228/KSPP.2010.19.2.073
  8. Kim. N. W., Lee. E. S., Lee. D. W., Kim. N. K., and Kim. D. H., 2003, "Evaluation of Machining Characteristics of the Micro Grooving for the Mold of PDP Barrier Rib," Journal of the Korea Society of Machine Tool Engineers, Vol. 12 No. 4, pp. 23-28.
  9. Jeon. T. J., Ko. J. B., and Lee. D. J., 2009, "A Study on Working Condition of the Pb Free Plating Process using the Plating Solution of Sn/Cu," Journal of the Korea Society of Machine Tool Engineers, Vol. 18 No. 2, pp. 234-240.