Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지

Acoustic Emission Characteristics of Notched Aluminum Plate Repaired with a Composite Patch

복합재 패치로 보수된 노치형 알루미늄 합금 평판의 음향방출 특성

  • 윤현성 (한양대학교 기계공학과 대학원) ;
  • 최낙삼 (한양대학교 기계공학과)
  • Received : 2011.01.05
  • Accepted : 2011.02.11
  • Published : 2011.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Edge notched A16061-T6 aluminum was repaired with a GFRP composite patch as a function of the number of stacking, Damage progress of specimen for tension load has been monitored by acoustic emission(AE), AE energy rate, hit rate, amplitude, waveform and 1st peak frequency distribution were analyzed. Fracture processes were classified into Al cracking, Fiber breakage, Resin cracking and Delamination. Displacement of a specimen can be divided into Region I, II and ill according to acoustic emission characteristics. Region II where the patch itself was actually fractured was focused on to clarify the AE characteristics difference for the number of stacking.

본 연구는 편측 노치가 삽입된 A16061-T6 알루미늄 합금 평판 시편에 대해 유리섬유강화플라스틱(GFRP) 복합재 패치의 적층수를 변수로 하여 보수히고, 인장 하중에 따른 시편의 손상 과정을 음향방출법(acoustic emission, AE)으로 실시간 분석하였다. AE 에너지 발생률(AE energy rate), hit 발생률(hit rate), AE 진폭(AE amplitude) 거통과 파형 및 1차 중심주파수(1st peak frequency)의 대역을 조사하여, 시편 파괴시 알루미늄 크랙(Al cracking), 섬유 파단(fiber breakage), 수지 균열(resin cracking), 층간 분리(delamination)로 분류하였다. 시편의 변위를 음향방출 특성에 따라 구간(region) I, II, III으로 나눌 수 있었으며, 패치 자체가 실제 파괴되는 구간인 구간 II를 세부적으로 분석하여 패치의 적층수에 따른 AE 특성 차이를 구하였다.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. C. L. Ong, R. C. Chu, T. C. Ko and S. B. Shen, "Composite patch reinforcement of cracked aircraft upper longeron : analysis and specimen simulation," Theoretical and Applied Fracture Mechanics, Vol. 14, No. 1, pp. 13-26 (1990) https://doi.org/10.1016/0167-8442(90)90040-7
  2. S. Naboulsi and S. Mall, "Characterization of fatigue crack growth in aluminum panels with a bonded composite patch," Composite Structure, Vol. 37, No. 3-4, pp. 321-334 (1997) https://doi.org/10.1016/S0263-8223(98)80003-2
  3. Hossein Hosseini Toudeshky, Bijan Mohammadi and Hamid Reza Daghyani, "Mixed-mode fracture analysis of aluminum repaired panels using composite patches," Composites Science and Technology, Vol. 66, No. 2, pp. 188-198 (2006) https://doi.org/10.1016/j.compscitech.2005.04.028
  4. Jean Denis Mathias, Xavier Balandraud and Michel Grediac, "Applying a genetic algorithm to the optimization of composite patches," Computers and Structures, Vol. 84, No. 12, pp. 823-834 (2006) https://doi.org/10.1016/j.compstruc.2005.12.004
  5. D. Quinas, B. Bachir Bouiadjar, B. Achour and N. Benderdouche, "Modelling of a cracked aluminum plate repaired with composite octagonal patch in mode I and mixed mode," Material and Design, Vol. 30, No. 3, pp. 590-595 (2009) https://doi.org/10.1016/j.matdes.2008.05.040
  6. C. T. Sun, J. Klug and C. Arendt, "Analysis of cracked aluminum plates repaired with bonded composite patch," AIAA Journal, Vol. 34, No. 2, pp. 369-375 (1996) https://doi.org/10.2514/3.13073
  7. Turaga V. R. S. Umamaheswar and Ripudaman Singh, "Modelling of a patch reapir to a thin cracked sheet," Engineering Fracture Mechanics, Vol. 62, No. 203, pp. 267-289 (1999) https://doi.org/10.1016/S0013-7944(98)00088-5
  8. F. Findik and H. Unal, "Development of thermal residual strain in a single sided composite patch," Composite Part B: Engineering, Vol. 32, No. 4, pp. 379-383 (2001) https://doi.org/10.1016/S1359-8368(01)00018-X
  9. P. Colimbi, A. Bassetti and A. Nussbauber, "Delamination effects on cracked steel members reinforced by prestressed composite patch," Theoretical and Applied Fracture Mechanics, Vol. 39, No. 1, pp. 61-71 (2003) https://doi.org/10.1016/S0167-8442(02)00138-6
  10. 김위대, "복합재 패치를 이용한 노후 항공기의 중앙균열 보수에 관한 연구", 한국항공우주학회지, Vol. 27, No. 8, pp. 71-78 (1999)
  11. 정기현, 양원호, 김철, "경사균열을 갖는 복합재료 보강판의 피로균열 성장에 관한 연구", 대한기계학회지 A권, Vol. 25, No. 12, pp. 2091-2099 (2001)
  12. 김만태, 이경엽, "탄소섬유/에폭시 복합재로 보수된 알루미늄의 피로특성에 대한 연구: 알루미늄 표면처리 효과", 한국정밀공학회지, Vol. 21, No. 11, pp. 149-154 (2004)
  13. A. Chukwujekwu Okafor, Navdeep Singh and Navrag Sinph, "Acoustic emission detection and prediction of fatigue crack propagation in composite patch repairs using neural networks", American Institute of Physics, pp. 1532-1539 (2007)
  14. 권오양, 김성진, 장용준, "복합재 패치로 보수된 알루미늄 패널의 피로균열 성장거동과 AE신호의 유형인식", 비파괴검사학회지, Vol. 27, No. 1, pp. 48-57 (2007)