Abstract
This study was conducted to investigate the effects of sawdust size and moisture content, pelletizing temperature and time on the durability of the pellets fabricated with larch and tulip tree sawdust. The durability of larch-pellet was significantly higher than that of tulip tree-pellet. For the larch-pellets, the durability of the pellets fabricated with > 18 mesh sawdust was higher than that of 8~18 mesh sawdust. With the increases of pelletizing temperature and time, the durabilities of larch- and tulip tree-pellets steadily improved. The durabilities of larch- and tulip tree-pellets also increased as the moisture content of sawdust increased. In the comparison of durabilities between commercial pellets and larch- or tulip tree-pellets, the pellets fabricated with larch and tulip tree sawdusts in our study were less denser than commercial pellets, but the durability of most larch-pellets was satisfied with the 1st-grade pellet standard designated by Korea Forest Research Institute. In addition, the durability of tulip tree-pellets were higher than that of the 3rd-grade pellet standard. From the scanning electron microscopic observation of larchand tulip tree-pellets, the gap between the sawdusts of each pellet was reduced with the increases of pelletizing temperature and time. In particular, it was visually confirmed that the surface of the pellets made with the pelletizing temperature of $180^{\circ}C$ for 3 min did not differ from that of commercial pellets.
본 연구는 낙엽송과 백합나무 톱밥을 이용한 펠릿의 제조 과정에서 톱밥의 크기 및 함수율, 펠릿제조 온도 및 성형시간이 펠릿의 내구성에 미치는 영향을 알아보기 위하여 수행하였다. 수종별 내구성의 비교에서 낙엽송 펠릿의 내구성이 백합나무 펠릿보다 높았으며, 낙엽송 펠릿의 경우 18 mesh (1.00 mm) 이상 크기의 톱밥으로 제조한 펠릿이 8~18 mesh (1.00~2.38 mm)의 톱밥으로 제조한 펠릿보다 내구성이 높았다. 펠릿제조 온도를 높이고 펠릿 성형시간을 연장함에 따라 펠릿의 내구성은 증가하였으며, 톱밥의 함수율이 올라감에 따라 펠릿의 내구성은 향상되는 것으로 나타났다. 한편, 본 연구에서 제조된 낙엽송 및 백합나무 펠릿은 대조구로 사용된 산림조합 및 일도에서 제조한 목재 펠릿보다 내구성은 낮았으나, 대부분의 낙엽송 펠릿은 국립산림과학원에서 고시한 목재펠릿의 내구성 1등급 기준(97.5%)을 만족하였으며, 백합나무 펠릿은 3등급 기준(95%)을 모두 상회하였다. 전자현미경을 이용한 펠릿의 관찰에서 펠릿제조 온도를 높이고 펠릿 성형시간을 연장함에 따라 펠릿내에서 톱밥 간의 거리가 감소하고, 특히 $180^{\circ}C$의 온도에서 3분의 성형시간으로 제조한 펠릿의 경우 대조구 시편과 크게 차이가 없는 것을 육안으로 확인할 수 있었다.